Zero Zero Hover 2 User Manual

Quick Guide

快速入门指南

H2-1106

© 2019 Zero Zero Robotics - All Rights Reserved

深圳零零无限科技有限公司 版权所有

V201912

Optical Radar

Power Button

Status Indicator Light

Gimbal and Camera

Heat Vents

Snap-on Clip

（Protective Enclosure Only）

Reset Button

Wi-Fi / RC
Toggle Button

Micro SD Card Slot

Heat Vents

Propeller

Bottom Optical Sensor

Tail Indicator Light

Sonar Sensor

USB-C Port

Protective Enclosure

Intelligent Battery

Battery Level Indicator Light

Step 1 Download Hover 2 App

1

2

Step 3

Prepare Hover 2

Download the “Hover 2” app from the
App Store / Google Play Store.

Hover 2 App is compatible with iOS 10.0 (or above) or Android 5.0 (or above).

*

Step 2

Charging and Activation

Charge the Intelligent Battery

Please charge the intelligent battery to activate it for
first time use.

Remove the Intelligent Battery It takes about an hour to fully charge

Install the Intelligent Battery

Press and hold the power button for 2 seconds
until the power light blinks. Once it’s finished
booting up, you will hear a sound.

Unfold Hover 2, and pop up the Optical Radar.

Step 4

Connect Hover 2

Connect your Mobile Device

Go to the Wi-Fi settings page of your mobile device
and connect to the Hover 2 hotspot.

Wi-Fi name:

Settings

WLAN

HoverCamera_xxxxxx

Hover_2-xxxxxx

CHOOSE A NETWORK

If the Hover 2 hotspot is not found, press and hold the Wi-Fi / RC toggle button

*

for 4 seconds, and try to connect again after hearing the beep.

Hover_2-xxxxxx

Look for the password on:

1. The label on the box

2. The label on the drone body

3. The drone battery compartment

Step 5 Step 7

Takeoff / Landing Hover 2

Takeoff with the Hover 2 App

Tap the “ Takeoff ” button
to initiate takeoff.

Check and Download Pictures & Videos

Landing with the Hover 2 App

Tap the “Return To Home” button,
Hover 2 will automatically start
flying back to the preset return point.

Step 6

Enjoy Flying

Or tap the “Landing” button
to land Hover 2.

Control with Hover 2 App

Open Hover 2 App and enjoy flying.

Method One: Connect Hover 2 and a mobile device via Wi-Fi.

Method Two: Connect Hover 2 and a computer with a cable.

(Adapter Required)

Method Three: Connect Hover 2 and a mobile device with a cable.

Flight SafetyReplacing the Protective Enclosure

Flying with the Propeller Guards and the Landing
Gear can improve Hover 2's flight time and wind
resistance.

Attention:

Avoid touching the
Heat Vents immediately
after flight.

When the Protective
Enclosure is not in use,
install the Landing
Gear and takeoff on flat
ground.

Do not touch the
rotating propellers
with your fingers or
other objects.

Replace aging, broken
or deformed propellers.

Improper Flying Environments

Near crowds or dense buildings

No-fly zones

Do not use undue
force or put excessive
pressure on the
Protective Enclosure.

We recommend that
you maintain the
drone within your
visual line of sight.

:

Near strong magnetic fields

In rain, fog, snow, lightning, hail,
storms, strong wind, or any other
extreme weather environments.

Please check the Disclaimer and Safety Instructions for more details at

zerozerorobotics.com/support/downloads.

Please read it carefully before flying.

For more information, please download the User Manual
from the official website.

This guide is subject to change without prior notice. Please visit the

*

official website for more detailed information.

If you are using the Palm Pilot or BlastOff Controller to control Hover 2,

*

please check the corresponding user guide or check on

zerozerorobotics.com/support/downloads for operation details.

According to changes in market demand or production plan,

*

Shenzhen Zero Zero Infinity Technology Co., Ltd. may change the
product specifications and appearance.Please contact us if you have
any questions.

了解更多信息，请前往官网下载《用户手册》。

本指南如有更新，恕不另行通知。请登录官网获取最新信息。

*

若使用掌上 RC 或航拍遥控器操控 Hover 2，请查看相应使用指南，

*

或登录 zerozerorobotics.com/support/downloads 查看。

根据市场需求的变化或生产计划的调整，深圳零零无限科技有限公司

*

可能对产品规格、外观进行更改，如您有疑问请联系我们。

Support Email:

[e-mail]

Hotline:

650-477-0186（11:00am——17：00pm)

售后支持邮箱 :

[e-mail]

服务热线 :

400-188-0053（10:00am——18：00pm)

微信公众号

视觉雷达

电源键

状态指示灯

一体式云台相机

散热孔

固定卡扣

（全保护外框用）

恢复出厂设置按键

Wi-Fi / RC

控制模式切换按键

Micro SD 卡槽

散热孔

螺旋桨

底部视觉传感器

机尾方向指示灯

声呐传感器

数据接口（USB-C）

全保护外框

智能电池

电池电量指示灯

第一步下载并安装

选取网络

1

2

Hover 2 App

第三步

准备

Hover 2

在应用商店搜索并下载“Hover 2”。

请使用 iOS 10.0 及以上版本或 Android 5.0 及以上版本。

*

第二步

充电

给智能电池充电

首次使用智能电池，需要充电激活。

取下智能电池完全充满大约需要 1 小时

长按电源键 2 秒至电源灯开始闪烁，等待开机音乐

响起，开机成功。

展开 Hover 2，请轻按视觉雷达使其弹出。

第四步

连接

Hover 2

使用移动设备连接

进入移动设备的 Wi-Fi 设置页面，连接 Hover 2 热点。

Wi-Fi名称:

设置

无线局域网

HoverCamera_xxxxxx

Hover_2-xxxxxx

Hover_2-xxxxxx

从以下位置查看密码:

1 . 包装盒内标贴

2. 机身标贴

3. Hover 2 电池仓

安装智能电池

若未找到 Hover 2 热点，请长按 Wi-Fi / RC 控制模式切换按键 4 秒，

*

听到嘀嘀声后再次尝试连接。

第五步

放飞 / 收回

Hover 2

使用 Hover 2 App 一键放飞

点击拍摄界面的“起飞”图标，

飞机将自动起飞

第七步

查看和下载拍摄内容

使用 Hover 2 App 收回

点击“自动返航” 图标，Hover 2

将自动返航到预设的返航点。

第六步

享受飞行

或点击“一键降落” 图标，Hover 2

将自动原地降落。

使用 Hover 2 App 控制飞行

打开 Hover 2 App，体验智能操控带来的飞行乐趣。

方法一：通过 Wi-Fi 连接 Hover 2 和手机

方法二：使用数据线连接 Hover 2 和电脑

（需要转接头）

方法三：使用数据线连接 Hover 2 和手机

更换旋翼保护框及起落架

飞行安全

更换旋翼保护框及起落架可以提升 Hover 2 的飞行

时间和抗风性。

注意事项：

飞行结束时请避免

立即触碰散热孔

未使用全保护外框时，

请安装起落架，并将

Hover 2 置于平坦地面

起飞

手指或其他物品切勿

接触旋转中的螺旋桨

及时更换老化、破损或

变形的螺旋桨

不适用飞行环境：

人群、建筑密集的区域

禁止飞行的区域或建筑物周围

请勿用力按压全保护

外框

建议在视线范围内

飞行

强磁场环境

雨雪、雾霾、雷电、大风、冰雹、

沙尘等恶劣天气环境

Powered by TCPDF (www.tcpdf.org)

更多安全事项请参考

zerozerorobotics.com/support/downloads 上的免责声明和安全

操作手册，飞行前请务必仔细阅读。