Zephyr ZPHY1590 Installation & Assembly
ZRC-0085
For use with models: AK8500AS
2277 Harbor Bay Pkwy
Alameda, CA 94502
1.888.880.8368
Place charcoal filter on backside of filter. And place filter
brackets over charcoal filter
and secure in place by
tucking each end of bracket
under the filter frame. Reinstall filter.
INCLUDED MATERIALS
(4) return air
(1) return air vent
Turn to next page for instructions
on installing return air vent.
vent screws
(1) charcoal filter
(3) Brackets
MAR 21.0101
XP022643(1)
1
To install the return air vent to top of the cabinet:
(for installations where cabinet does not extend to the ceiling)
1. Cut a 6-1/2” round opening in top of the
cabinet where the ducting will connect
to the return air vent. FIG.1
2. Connect 6” round ducting from AK8500AS
to return air vent collar. Return air vent collar
will go around the ducing. Secure with duct tape.
3. Secure return air vent to top of cabinet with
(4) screws.
To install the return air vent to a soffit or ceiling:
(for installations where top of cabinet is flush with the ceiling)
1. Cut a 6-1/2” round opening in soffit or ceiling
where the ducting will connect to the return
air vent. FIG.2
2. Connect 6” round ducting from AK8500AS
to return air vent collar. Return air vent collar
will go around the ducing. Secure with duct tape.
3. Secure return air vent to soffit or ceiling with
(4) screws.
ZRC-0085 Recirculating Kit Instructions
screw (1 in each corner
of return air vent)
screw (1 in each corner
of return air vent)
top of cabinet
soffit or
ceiling
top of cabinet
Return Air Vent
6” round
duct from
AK8000AS
FIG.1
Return Air Vent
FIG.2
note: Return air vent deflectors should face
the sides to properly vent the air. FIG.3
airflow airflow
FIG.3
2
Loading...