1. Cut a 6 1/2" round opening in top or the
(6) Brackets
(2) charcoal filters
cabinet where the ducting will connect to the
return air vent and 7" to 6" adapter. FIG.3.
2. Connect 7" round ducting from blower collar to
return air vent collar. Return air vent collar will
go around the ducting. Secure with duct tape.
3. Secure return air vent to top of cabinet with (4)
screws.
FIG.3
1. Remove mesh filter from hood and place
charcoal on the top of mesh filter. Secure
Place charcoal filter on back-side of baffle
1. Remove mesh filter from hood and place
charcoal filter by 4 C clips from recirculation
filter. And place filter brackets over
charcoal on the top of mesh filter. Secure
kit, 2 C clips for each enlongated side of
charcoal filter and secure in place by
charcoal filter by 4 C clips from recirculation
charcoal filter, FIG.1.
tucking each end of bracket under the
kit, 2 C clips for each enlongated side of
baffle filter frame. FIG.1
charcoal filter, FIG.1.
2. Reinstall mesh filter.
2. Reinstall mesh filter.
3. Charcoal filtere must be replaced after every
3. Charcoal filter must be replaced after every
120 hours of use or approximately every
120 hours of use or approximately every
3 to 4 months based on an average daily
3 to 4 months based on an average daily
use of 1 hour of cooking time.
use of 1 hour of cooking time.
4. Install 7" to 6" adapter to the return air vent
and use tape to secure. FIG.2.
4. Install 7" to 6" adapter to the return air vent
4. Install 7" to 6" adapter on the top of hood,
and use tape to secure. FIG.2.
FIG. 2.
1. Cut a 6 1/2" round opening in soffit ceiling
where the ducting will connect to the return
air vent and 7" to 6" adapter. FIG.4.
2. Connect 7" round ducting from blower collar to
return air vent collar. Return air vent collar will
go around the ducting. Secure with duct tape.
3. Secure return air vent to soffit or ceiling with (4)
screws.
May 16.0101
FIG.4
top of cabinet
FIG.5
Loading...