Zephyr ZPHY1271 Owner Manual

Page 1
DESIGNER
LIFT
DOWNDRAFT
The Lift Downdraft is everything you want in a luxury ventilation system– power, performance, and good looks. Packed with perks like the dual-level BriteStrip™ LED lighting, Tri-Capture
Zones and 4-Way Ducting, the Lift is ready to help you rise to any occasion with the touch of a button.
2”
18”
27-1/4”, 33-1/4”
30”, 36”
25-1/2”, 31-1/2”
9-3/8”
2-1/4”
2-1/2”
29-3/8”
CUTOUT AND CLEARANCE DIMENSIONS
Flat countertop min. 2-3/4”
Cooktop
Countertop
Cooktop to rear wall of
cabinet min. 2-7/8”
Front to back inside cabinet depth
Downdraft
Page 2
DESIGNER
LIFT
DOWNDRAFT
MODEL Stainless Steel
Size
PERFORMANCE Internal/In-Line Blower (DBI-600A)* In-Line Blower (PBN-1000A)* External Blower (CBE-1000)*
FEATURES Controls Speed Levels
Auto On/O**
Lighting Dual-Level Lighting Filters Filter Clean Reminder Tri-Capture Zones 4-Way Ducting 18” Chimney Rise Recirculating Option
DLI-E30ASX 30”
200-600 CFM 500-1,000 CFM 500-1,000 CFM
Capacitive Touch 3 Yes BriteStrip™ LED, x1 Yes Aluminum Mesh x2 Yes Yes Yes Yes Yes
DLI-E36ASX 36”
200-600 CFM 500-1,000 CFM 500-1,000 CFM
Capacitive Touch 3 Yes BriteStrip™ LED, x1 Yes Aluminum Mesh x2 Yes Yes Yes Yes Yes
DUCT SPECIFICATIONS Front Ducting Left/Right Ducting Rear Ducting Bottom Ducting
AC POWER Hood w/ DBI-600A Hood w/ PBN-1000A Hood w/ CBE-1000
OPTIONAL ACCESSORIES Recirculating Kit ADA Compliant Remote Up/Down Control Gas Cooktop Seal Kit Range Trim Kit Electronics Extension Cable - 5’ End Cap Trim Extension +1” Front Panel Rough-In Plate, 8” Round Front Panel Rough-In Plate, 10” Round 1-7/8” x 19” to 8” Round Transition 1-7/8” x 19” to 10” Round Transition 1-7/8” x 19” Adapter for AK00080 Duct 1-7/8” x 19” Rectangular Duct, 2’ Make-Up Air Kit
8”(DBI), 10”(PBN/CBE) 1-7/8” x 19” to 8”/10” round 1-7/8” x 19” to 8”/10” round 1-7/8” x 19” to 8”/10” round
120V, 60Hz, Max. 3A 120V, 60Hz, Max. 4.4A 120V, 60Hz, Max. 4.3A
ZRC-00LF DDA-0002 DDS-0030 DDT-0030 11030132 DDE-0001 54190053 54190054 AK00070 AK00071 AK00072 AK00080 MUA006A (600 CFM) MUA008A (1,000 CFM)
8”(DBI), 10”(PBN/CBE) 1-7/8” x 19” to 8”/10” round 1-7/8” x 19” to 8”/10” round 1-7/8” x 19” to 8”/10” round
120V, 60Hz, Max. 3A 120V, 60Hz, Max. 4.4A 120V, 60Hz, Max. 4.3A
ZRC-00LF DDA-0002 DDS-0036 DDT-0036 11030132 DDE-0001 54190053 54190054 AK00070 AK00071 AK00072 AK00080 MUA006A (600 CFM) MUA008A (1,000 CFM)
WARRANTY
*Blower sold separately.
**Automatically turns on or o when raising or lowering the air vent.
Specications subject to change, check zephyronline.com for up-to-date information.
Zephyr Ventilation | 2277 Harbor Bay Parkway, Alameda, CA 94502 | 888.880.VENT
JUN20.0101
2 year parts, 1 year labor
2 year parts, 1 year labor
Page 3
DESIGNER
LIFT
DOWNDRAFT
COOKING APPLIANCE CONFIGURATIONS Accommodate multiple cooking appliance combinations thanks to our 4-way ducting system.
Cooktop
Cooktop + Oven
Range Top
4-WAY DUCTING
Gives you the exibility to vent in multiple directions, compatible with all blower options.
Front Exhaust
Range
Side Exhaust
Rear Exhaust
Bottom Exhaust
Page 4
DESIGNER
1-1/4”
MODEL DDE-0001
LIFT
DOWNDRAFT
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORY OPTIONAL ACCESSORYDESCRIPTION DESCRIPTION
Model DDA-0002 Model AK00070
Use when you cannot reach the UP/
DOWN button on the downdraft chimney.
Can be located on counter top, face of
cabinetry or on the side cabinet of an
Cannot be used where remote control will
interfere with cooking, where hot pans
could be set, or where hot liquids could
(Remote wiring connects with 6-pin connection.)
Models DDS-0030, DDS-0036
cooktops. Includes trim bracket and trim
Remote Up/Down Control 1-7/8” x 19” to 8” Round Transition
Rectangular to 8” round transition for
side, rear, or bottom exhaust when using
DBI-600A Blower. Can be attached to
downdraft unit or rectangular duct
1-7/8” x 19” to 10” Round Transition
Rectangular to 10” round transition for
side, rear, or bottom exhaust when using
external blower. Can be attached to
downdraft unit or rectangular duct
island. Cut-out: 2-1/4”H x 2”W
be spilled on the control.
Gas Cooktop Seal Kit
Recommended for use with all gas
19”
21-1/4”
Model AK00071
1-7/8”
19”
21-1/4”
dia. 7-3/4”
dia. 9-1/2”
7-3/4”
1-7/8”
7-3/4”
1-7/8”
(AK00072).
(AK00072).
seal.
Rectangular adapter for 1-7/8” x 19”
Use to connect 1-7/8” x 19” rectangular
duct directly to downdraft when using
side or rear exhaust.
Front Panel Rough-In Plate – 8” Round
Use where 8” round duct or elbow attaches to front of airbox (model
DBI-600A used as remote blower
installation).
Models DDT-0030, DDT-0036
Model 11030132
30”, 36” widths
Range Trim Kit
Use with free-standing range - where a
gap is present between back of range
and downdraft
30”, 36” widths
Extension Cable – 5ft.
Model AK00072
1-1/8”
1-5/8”
19-5/8”
21-5/8”
Model 54190053
dia. 5-7/8”
1”
2”
12-3/4”
12-3/4”
Use where electrical panel is remotely
Model ZRC-00LF
mounted. Extends electrical panel cable
an additional 5 feet.
Two can be connected to achieve 10ft.
Non-Duct Recirculating Kit
Use where ducting is not feasible or
Model 54190054
dia. 9-7/8”
1”
12-3/4”
12-3/4”
Front Panel Rough-In Plate – 10” Round
Use where 10” round duct or elbow
attaches to front of airbox (exterior or
in-line blower installation).
available. Mount to toe kick or base of a
Model DDE-0001
cabinet and attach directly to DBI-600A
Blower using 8” round duct. Kit can be
rotated so that the exhaust is not directly
at your feet. Includes recirculating filter
and decorative cover plate.
End Cap Trim Extension +1” Width
End Cap Trim Extensions
(Increases trim width 1-inch to 31-, or 37-inches.)
MODELS DDT-0030, DDT-0036
Range Trim Kit
(Option to fill gap between range and downdraft.)
MODELS DDS-0030, DDS-0036
Gas Cooktop Seal Kit
(Recommended for use with gas cooktops.)
Use left and right to increase the overall
trim width by 1”.
Model AK00080
19-1/4”
24-1/8”
Rectangular Duct – 2-ft. Sections
2-1/8”
Use to extend ducting when used in side,
rear, or bottom exhaust. Can be cut down
to size and multiple sections can be
connected to each other.
Galvanized steel construction.
(1-7/8” x 19”)
HD1102A
MODEL DDA-0002
Remote Up/Down Control
MODEL 11030132
Extension Cable – 5ft.
Loading...