Zephyr AEDM90ASX Manual

Loading...

customer service 1.888.880.8368

Duct Cover Extension

Z1C-00LA

For use with Edge, Duo Wall and Layers Wall range hood

 

 

Mounting the duct cover

Pag. 3

 

 

 

 

 

 

 

 

Fixation des cheminees

Pag. 4

 

 

 

 

 

 

 

 

Fijación de las chimeneas

Pag. 5

 

 

 

 

 

 

 

 

Fissaggio dei camini

Pag. 6

 

 

 

 

 

 

 

 

 

 

 

 

www.zephyronline.com

DUCT COVER EXTENSION SPECIFICATION

EDGE

DUO WALL

10-1/16"

10-1/16"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Min 44" - Max 80"

 

 

 

 

 

 

 

 

 

 

Min 43" - Max 79"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

38-7/8"

4-9/16"

 

 

 

 

 

 

 

 

38"-7/8"

1/8"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LAYERS WALL

10-1/16"

1/2"

38-7/8"

Min 43" - Max 79"

3-

 

 

- 2 -

MOUNTING THE DUCT COVER

1.Install the electrical wiring and test hood for functions prior to installing the duct covers.

2.If using hood in air recirculating mode make sure to install the air diverter plate prior to mounting the duct covers. See the manual included with the recirculating kit for more instructions.

3.Adjust the width of the duct cover support bracket so that it fits inside the top of the chimney and observing the distance shown in Fig.1

4.Secure duct cover bracket to top of wall just below the ceiling using (2) screws provided. See Fig. 2

5.Place ducting from ceiling over the collar on top of the hood and secure using aluminum duct tape. See Fig. 3

6.Insert top duct cover into bottom duct cover. Seat the duct covers correctly on the hood.

7.Extend top duct cover up and secure to the duct cover bracket using (2) screws. See Fig. 4

Installation - Mounting the Duct Cover

- 3 -

+ 5 hidden pages