Zep ZUWLFF128 User Manual
SAFETY DATA SHEET
BZ7594 ZC WET LOOK POLISH ZUWLFF128 4/1G
Version 2.1
Revision Date 03/07/2017
Print Date 05/09/2017
Material name
:
BZ7594 ZC WET LOOK POLISH ZUWLFF128 4/1G
Material number
:
000000000001044898
Company
:
Zep Inc.
Address
:
1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Recommended use
:
Floor Care
Appearance
liquid
Colour
milky, white
Odour
mild, ammonical
Substance / Mixture
:
Mixture
Chemical name
CAS-No.
Concentration [%]
tris(2-butoxyethyl) phosphate
78-51-3
>= 1 - < 5
General advice
:
Do not leave the victim unattended.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
Recommended use of the chemical and restrictions on use
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
Not a hazardous substance or mixture.
GHS label elements
Not a hazardous substance or mixture.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
The exact percentages of disclosed substances are withheld as trade secrets.
SECTION 4. FIRST AID MEASURES
1 / 9
SAFETY DATA SHEET
BZ7594 ZC WET LOOK POLISH ZUWLFF128 4/1G
Version 2.1
Revision Date 03/07/2017
Print Date 05/09/2017
If inhaled
:
If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
In case of skin contact
:
If skin irritation persists, call a physician.
In case of contact, immediately flush skin with plenty of water
for at least 15 minutes while removing contaminated clothing
and shoes.
Wash contaminated clothing before re-use.
In case of eye contact
:
Flush eyes with water as a precaution.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed
:
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Keep respiratory tract clear.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Most important symptoms
and effects, both acute and
delayed
:
Effects may be delayed, symptoms may include minor eye or
skin irritation.
Overexposure may cause mild eye or skin irritation.
Notes to physician
:
Treat symptomatically. Symptoms may be delayed.
Suitable extinguishing media
:
Use water spray, alcohol-resistant foam, dry chemical or
carbon dioxide.
Unsuitable extinguishing
media
:
High volume water jet
Hazardous combustion
products
:
No hazardous combustion products are known
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Standard procedure for chemical fires.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
protective equipment and
:
Use personal protective equipment.
SECTION 5. FIREFIGHTING MEASURES
SECTION 6. ACCIDENTAL RELEASE MEASURES
2 / 9
SAFETY DATA SHEET
BZ7594 ZC WET LOOK POLISH ZUWLFF128 4/1G
Version 2.1
Revision Date 03/07/2017
Print Date 05/09/2017
emergency procedures
Environmental precautions
:
Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Wipe up with absorbent material (e.g. cloth, fleece).
Keep in suitable, closed containers for disposal.
Advice on safe handling
:
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
:
Electrical installations / working materials must comply with
the technological safety standards.
Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Materials to avoid
:
Oxidizing agents
Do not store near acids.
Do not freeze.
Engineering measures
:
none
Respiratory protection
:
No personal respiratory protective equipment normally
required.
Material
:
Protective gloves
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Eye protection
:
Tightly fitting safety goggles
Skin and body protection
:
Impervious clothing
Choose body protection according to the amount and
concentration of the dangerous substance at the work place.
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
Hand protection
3 / 9
Loading...