Zep ZUNRS128 User Manual

SAFETY DATA SHEET
ZEP NO RINSE FLR DISINFCT
Version 3.1
Print Date 08/02/2018
Material name
:
Zep(R) No-Rinse Floor Disinfectant
EPA ID Number:
1839-168-40849 Material number
:
ZUNRS128
Company
:
Zep Commercial Sales & Service, a unit of Zep, Inc.
Address
:
350 Joe Frank Harris Parkway, SE Emerson, GA 30137 Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded. In the District of Columbia 202-483-7616
Recommended use
:
Disinfectant Appearance
liquid
Colour
yellow
Odour
pleasant
Acute toxicity (Oral)
:
Category 4
Acute toxicity (Inhalation)
:
Category 2
Skin irritation
:
Category 2
Serious eye damage
:
Category 1
Specific target organ toxicity ­single exposure (Inhalation)
:
Category 2
Hazard pictograms
:
Signal word
:
Danger
Hazard statements
:
H302 Harmful if swallowed. H315 Causes skin irritation. H318 Causes serious eye damage.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
Recommended use of the chemical and restrictions on use
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS label elements
1 / 12
SAFETY DATA SHEET
ZEP NO RINSE FLR DISINFCT
Version 3.1
Print Date 08/02/2018
H330 Fatal if inhaled. H371 May cause damage to organs if inhaled.
Precautionary statements
:
Prevention: P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/ eye protection/ face protection. P284 Wear respiratory protection.
Response:
P301 + P312 + P330 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. P308 + P311 IF exposed or concerned: Call a POISON CENTER/doctor. P332 + P313 If skin irritation occurs: Get medical advice/ attention. P362 Take off contaminated clothing and wash before reuse. Storage: P403 + P233 Store in a well-ventilated place. Keep container tightly closed. Disposal: Dispose of contents/container in accordance with local regulation. Substance / Mixture
:
Mixture
Chemical name
CAS-No.
Concentration [%]
Quaternary ammonium compounds, benzyl-C12­16-alkyldimethyl, chlorides
68424-85-1
>= 1 - < 5
General advice
:
Move out of dangerous area. Consult a physician. Show this safety data sheet to the doctor in attendance. Symptoms of poisoning may appear several hours later. Do not leave the victim unattended.
If inhaled
:
Call a physician or poison control centre immediately. If unconscious, place in recovery position and seek medical
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
The exact percentages of disclosed substances are withheld as trade secrets.
SECTION 4. FIRST AID MEASURES
2 / 12
SAFETY DATA SHEET
ZEP NO RINSE FLR DISINFCT
Version 3.1
Print Date 08/02/2018
advice.
In case of skin contact
:
If skin irritation persists, call a physician. Wash off immediately with plenty of water for at least 15 minutes. If on clothes, remove clothes.
In case of eye contact
:
Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. If in eyes, rinse with water for 15 minutes.
If swallowed
:
Keep respiratory tract clear. Never give anything by mouth to an unconscious person. DO NOT induce vomiting unless directed to do so by a physician or poison control center. If symptoms persist, call a physician.
Most important symptoms and effects, both acute and delayed
:
Effects are immediate and delayed. Symptoms may include irritation, redness, pain, and rash. Review section 2 of SDS to see all potential hazards. Causes skin irritation. Causes serious eye irritation.
Notes to physician
:
Treat symptomatically. Symptoms may be delayed.
Suitable extinguishing media
:
Water spray jet Alcohol-resistant foam Carbon dioxide (CO2) Dry chemical
Unsuitable extinguishing media
:
High volume water jet
Specific hazards during firefighting
:
Do not allow run-off from fire fighting to enter drains or water courses.
Hazardous combustion products
:
Carbon dioxide (CO2) Carbon monoxide Nitrogen oxides (NOx) Smoke
Specific extinguishing methods
:
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Further information
:
Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Special protective equipment for firefighters
:
Wear self-contained breathing apparatus for firefighting if necessary.
SECTION 5. FIREFIGHTING MEASURES
3 / 12
SAFETY DATA SHEET
ZEP NO RINSE FLR DISINFCT
Version 3.1
Print Date 08/02/2018
Personal precautions, protective equipment and emergency procedures
:
Use personal protective equipment. Ensure adequate ventilation. Refer to protective measures listed in sections 7 and 8. Evacuate personnel to safe areas.
Environmental precautions
:
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Methods and materials for containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.
Advice on safe handling
:
Do not breathe vapours or spray mist. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Provide sufficient air exchange and/or exhaust in work rooms. Dispose of rinse water in accordance with local and national regulations.
Conditions for safe storage
:
Prevent unauthorized access. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Electrical installations / working materials must comply with the technological safety standards.
Materials to avoid
:
Oxidizing agents
Engineering measures
:
effective ventilation in all processing areas
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory equipment.
SECTION 6. ACCIDENTAL RELEASE MEASURES
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
4 / 12
Loading...
+ 8 hidden pages