Zep ZULFFS128 User Manual

SAFETY DATA SHEET

BZ7578 ZC HD FL00R STRIP ZULFFS128 4/1G

Version 1.2

Revision Date 04/13/2017

Print Date 05/09/2017

Material name

:

BZ7578 ZC HD FL00R STRIP ZULFFS128 4/1G
Material number

:

000000000001045769

Company

:

Zep Inc.

Address

:

1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone

:

404-352-1680

Emergency telephone numbers

For SDS Information

:

Compliance Services 1-877-428-9937

For a Medical Emergency

:

877-541-2016 Toll Free - All Calls Recorded

For a Transportation
Emergency

:

CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616

Recommended use

:

Floor Care
Appearance

liquid

Colour

colourless, clear

Odour

solvent-like

Skin corrosion

:

Category 1

Serious eye damage

:

Category 1

Hazard pictograms

:

Signal word

:

Danger

Hazard statements

:

H314 Causes severe skin burns and eye damage.

Precautionary statements

:

Prevention:
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye
protection/ face protection.

Response:

P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT
induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Manufacturer or supplier's details

Recommended use of the chemical and restrictions on use

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

GHS Classification

GHS label elements

1 / 12

SAFETY DATA SHEET

BZ7578 ZC HD FL00R STRIP ZULFFS128 4/1G

Version 1.2

Revision Date 04/13/2017

Print Date 05/09/2017

immediately all contaminated clothing. Rinse skin with
water/shower.
P304 + P340 + P310 IF INHALED: Remove person to fresh air
and keep comfortable for breathing. Immediately call a
POISON CENTER/doctor.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON
CENTER/doctor.
P363 Wash contaminated clothing before reuse.
Disposal:
Dispose of contents/container in accordance with local
regulation.

Substance / Mixture

:

Mixture

Chemical name

CAS-No.

Concentration [%]

2-butoxyethanol

111-76-2

>= 10 - < 20

2-aminoethanol

141-43-5

>= 5 - < 10

General advice

:

Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.

If inhaled

:

If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
Remove to fresh air.

In case of skin contact

:

Immediate medical treatment is necessary as untreated
wounds from corrosion of the skin heal slowly and with
difficulty.
Wash off immediately with plenty of water for at least 15
minutes.
Remove contaminated clothing and shoes.
Wash contaminated clothing before reuse.
If skin irritation persists, call a physician.

In case of eye contact

:

Small amounts splashed into eyes can cause irreversible
tissue damage and blindness.
Rinse immediately with plenty of water, also under the eyelids,
for at least 15 minutes.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.

If swallowed

:

Keep respiratory tract clear.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components

SECTION 4. FIRST AID MEASURES

2 / 12

SAFETY DATA SHEET

BZ7578 ZC HD FL00R STRIP ZULFFS128 4/1G

Version 1.2

Revision Date 04/13/2017

Print Date 05/09/2017

Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Take victim immediately to hospital.

Most important symptoms
and effects, both acute and
delayed

:

Effects are dependent on exposure (dose, concentration,
contact time).
Effects are immediate and delayed.
Symptoms may include blistering, irritation, burns, and pain.
Causes severe skin burns and eye damage.
Review section 2 of SDS to see all potential hazards.

Notes to physician

:

Treat symptomatically. Symptoms may be delayed.

Suitable extinguishing media

:

Dry chemical
Water spray jet
Alcohol-resistant foam
Carbon dioxide (CO2)

Unsuitable extinguishing
media

:

High volume water jet

Specific hazards during
firefighting

:

Do not allow run-off from fire fighting to enter drains or water
courses.

Hazardous combustion
products

:

Carbon dioxide (CO2)
Carbon monoxide
Smoke
Nitrogen oxides (NOx)

Specific extinguishing
methods

:

Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.

Further information

:

Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Standard procedure for chemical fires.

Special protective equipment
for firefighters

:

Wear self-contained breathing apparatus for firefighting if
necessary.

Personal precautions,
protective equipment and
emergency procedures

:

Use personal protective equipment.
Ensure adequate ventilation.
Refer to protective measures listed in sections 7 and 8.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Environmental precautions

:

Prevent product from entering drains.

SECTION 5. FIREFIGHTING MEASURES

SECTION 6. ACCIDENTAL RELEASE MEASURES

3 / 12

SAFETY DATA SHEET

BZ7578 ZC HD FL00R STRIP ZULFFS128 4/1G

Version 1.2

Revision Date 04/13/2017

Print Date 05/09/2017

Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.

Methods and materials for
containment and cleaning up

:

Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.

Advice on safe handling

:

Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
To avoid spills during handling keep bottle on a metal tray.
Dispose of rinse water in accordance with local and national
regulations.

Conditions for safe storage

:

Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.

Materials to avoid

:

Store and keep away from, oxidizing agents and acids.

Components

CAS-No.

Value type
(Form of
exposure)

Control
parameters /
Permissible
concentration

Basis

2-butoxyethanol

111-76-2

TWA

20 ppm

ACGIH

TWA

5 ppm
24 mg/m3

NIOSH REL

TWA

50 ppm
240 mg/m3

OSHA Z-1

TWA

25 ppm
120 mg/m3

OSHA P0

PEL

20 ppm
97 mg/m3

CAL PEL

2-aminoethanol

141-43-5

TWA

3 ppm

ACGIH

STEL

6 ppm

ACGIH

TWA

3 ppm
8 mg/m3

NIOSH REL

ST

6 ppm
15 mg/m3

NIOSH REL

TWA

3 ppm
6 mg/m3

OSHA Z-1

STEL

6 ppm

OSHA P0

SECTION 7. HANDLING AND STORAGE

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

4 / 12