Zep ZUHLF128 User Manual
SAFETY DATA SHEET
BZ7593 ZC HARDWOOD LAM CLN ZUHLF128 4/1G
Version 3.1
Revision Date 12/06/2016
Print Date 05/09/2017
Material name
:
BZ7593 ZC HARDWOOD LAM CLN ZUHLF128 4/1G
Material number
:
000000000001041692
Company
:
Zep Inc.
Address
:
1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Recommended use
:
Floor Care
Appearance
liquid
Colour
colourless
Odour
pleasant
Substance / Mixture
:
Mixture
Chemical name
CAS-No.
Concentration [%]
2-(2-butoxyethoxy)ethanol
112-34-5
>= 1 - < 5
General advice
:
Do not leave the victim unattended.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
Recommended use of the chemical and restrictions on use
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
Not a hazardous substance or mixture.
GHS label elements
Not a hazardous substance or mixture.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
The exact percentages of disclosed substances are withheld as trade secrets.
SECTION 4. FIRST AID MEASURES
1 / 9
SAFETY DATA SHEET
BZ7593 ZC HARDWOOD LAM CLN ZUHLF128 4/1G
Version 3.1
Revision Date 12/06/2016
Print Date 05/09/2017
Show this safety data sheet to the doctor in attendance.
Move out of dangerous area.
Do not leave the victim unattended.
If inhaled
:
If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
In case of skin contact
:
If on clothes, remove clothes.
If skin irritation persists, call a physician.
Wash off immediately with plenty of water for at least 15
minutes.
In case of eye contact
:
Remove contact lenses.
Protect unharmed eye.
If eye irritation persists, consult a specialist.
If in eyes, rinse with water for 15 minutes.
If swallowed
:
Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Most important symptoms
and effects, both acute and
delayed
:
Effects may be delayed, symptoms may include minor eye or
skin irritation.
Overexposure may cause mild eye or skin irritation.
Notes to physician
:
Treat symptomatically. Symptoms may be delayed.
Suitable extinguishing media
:
Water spray jet
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing
media
:
High volume water jet
Specific hazards during
firefighting
:
Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
Smoke
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Standard procedure for chemical fires.
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
SECTION 5. FIREFIGHTING MEASURES
2 / 9
SAFETY DATA SHEET
BZ7593 ZC HARDWOOD LAM CLN ZUHLF128 4/1G
Version 3.1
Revision Date 12/06/2016
Print Date 05/09/2017
Personal precautions,
protective equipment and
emergency procedures
:
Ensure adequate ventilation.
Use personal protective equipment.
Evacuate personnel to safe areas.
Environmental precautions
:
If the product contaminates rivers and lakes or drains inform
respective authorities.
Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
Methods and materials for
containment and cleaning up
:
Wipe up with absorbent material (e.g. cloth, fleece).
Keep in suitable, closed containers for disposal.
Advice on safe handling
:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Conditions for safe storage
:
Electrical installations / working materials must comply with
the technological safety standards.
Keep in a dry, cool and well-ventilated place.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
No materials to be especially mentioned.
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
2-(2-butoxyethoxy)ethanol
112-34-5
TWA
(Inhalable
fraction and
vapor)
10 ppm
ACGIH
Engineering measures
:
effective ventilation in all processing areas
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory
equipment.
SECTION 6. ACCIDENTAL RELEASE MEASURES
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Personal protective equipment
Hand protection
3 / 9
Loading...