Zep ZUALL32EA User Manual

SAFETY DATA SHEET

BZ7920 ZEP ALL PURP CLNR ZUALL32 12/QT

Version 1.1

Revision Date 04/10/2015

Print Date 10/14/2015

Material name

:

BZ7920 ZEP ALL PURP CLNR ZUALL32 12/QT

Material number

:

000000000001047497

Company

:

Zep Inc.

Address

:

1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone

:

404-352-1680

Emergency telephone numbers

For SDS Information

:

Compliance Services 1-877-428-9937

For a Medical Emergency

:

877-541-2016 Toll Free - All Calls Recorded

For a Transportation
Emergency

:

CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616

Appearance

liquid

Colour

clear, green

Odour

pleasant

IARC

No component of this product present at levels greater than or
equal to 0.1% is identified as probable, possible or confirmed
human carcinogen by IARC.

ACGIH

No component of this product present at levels greater than or
equal to 0.1% is identified as a carcinogen or potential
carcinogen by ACGIH.

OSHA

No component of this product present at levels greater than or
equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.

NTP

No component of this product present at levels greater than or
equal to 0.1% is identified as a known or anticipated carcinogen
by NTP.

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Manufacturer or supplier's details

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

GHS Classification

Not a hazardous substance or mixture.

GHS Label element

Not a hazardous substance or mixture.

Potential Health Effects

Carcinogenicity:

1 / 9

SAFETY DATA SHEET

BZ7920 ZEP ALL PURP CLNR ZUALL32 12/QT

Version 1.1

Revision Date 04/10/2015

Print Date 10/14/2015

Substance / Mixture

:

Mixture

Chemical Name

CAS-No.

Concentration [%]

Alcohols, C10-14, ethoxylated

66455-15-0

>= 1 - < 5

General advice

:

Do not leave the victim unattended.

If inhaled

:

If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.

In case of skin contact

:

Take off contaminated clothing and shoes immediately.
Get medical attention if irritation develops and persists.
Wash contaminated clothing before re-use.
Wash off immediately with plenty of water for at least 15
minutes.

In case of eye contact

:

Remove contact lenses.
Protect unharmed eye.
If eye irritation persists, consult a specialist.
If in eyes, rinse with water for 15 minutes.

If swallowed

:

Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.

Suitable extinguishing media

:

Dry chemical
Water spray jet
Carbon dioxide (CO2)
Alcohol-resistant foam

Unsuitable extinguishing
media

:

High volume water jet

Specific hazards during
firefighting

:

Do not allow run-off from fire fighting to enter drains or water
courses.

Hazardous combustion
products

:

Carbon dioxide (CO2)
Carbon monoxide
Smoke

Specific extinguishing
methods

:

Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.

Further information

:

Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components

SECTION 4. FIRST AID MEASURES

SECTION 5. FIREFIGHTING MEASURES

2 / 9

SAFETY DATA SHEET

BZ7920 ZEP ALL PURP CLNR ZUALL32 12/QT

Version 1.1

Revision Date 04/10/2015

Print Date 10/14/2015

Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.

Special protective equipment
for firefighters

:

Wear self-contained breathing apparatus for firefighting if
necessary.

Personal precautions,
protective equipment and
emergency procedures

:

Use personal protective equipment.
Ensure adequate ventilation.
Refer to protective measures listed in sections 7 and 8.

Environmental precautions

:

Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.

Methods and materials for
containment and cleaning up

:

Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.

Advice on safe handling

:

For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Avoid contact with skin and eyes.
Avoid exposure - obtain special instructions before use.

Conditions for safe storage

:

Electrical installations / working materials must comply with
the technological safety standards.

Materials to avoid

:

Keep away from oxidising agents and strongly acid or alkaline
materials.

Respiratory protection

:

In the case of vapour formation use a respirator with an
approved filter.

Remarks

:

The suitability for a specific workplace should be discussed
with the producers of the protective gloves.

SECTION 6. ACCIDENTAL RELEASE MEASURES

SECTION 7. HANDLING AND STORAGE

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

Contains no substances with occupational exposure limit values.

Personal protective equipment

Hand protection

3 / 9