Zep ZUALL32 User Manual
SAFETY DATA SHEET
BZ7920 ZC ALL PURPOSE CLNR ZUALL32 12/QT
Version 3.0
Revision Date 04/20/2016
Print Date 05/09/2017
Material name
:
BZ7920 ZC ALL PURPOSE CLNR ZUALL32 12/QT
Material number
:
000000000001047497
Company
:
Zep Inc.
Address
:
1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Appearance
liquid
Colour
clear, green
Odour
pleasant
Eye irritation
:
Category 2A
Hazard pictograms
:
Signal word
:
Warning
Hazard statements
:
H319 Causes serious eye irritation.
Precautionary statements
:
Prevention:
P264 Wash skin thoroughly after handling.
P280 Wear eye protection/ face protection.
Response:
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/
attention.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS Label element
1 / 9
SAFETY DATA SHEET
BZ7920 ZC ALL PURPOSE CLNR ZUALL32 12/QT
Version 3.0
Revision Date 04/20/2016
Print Date 05/09/2017
Substance / Mixture
:
Mixture
Chemical Name
CAS-No.
Concentration [%]
Alcohols, C9-11, ethoxylated
68439-46-3
>= 1 - < 5
General advice
:
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled
:
If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
In case of skin contact
:
Take off contaminated clothing and shoes immediately.
Get medical attention if irritation develops and persists.
Wash contaminated clothing before re-use.
Wash off immediately with plenty of water for at least 15
minutes.
In case of eye contact
:
Remove contact lenses.
Protect unharmed eye.
If eye irritation persists, consult a specialist.
If in eyes, rinse with water for 15 minutes.
If swallowed
:
Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Suitable extinguishing media
:
Dry chemical
Water spray jet
Carbon dioxide (CO2)
Alcohol-resistant foam
Unsuitable extinguishing
media
:
High volume water jet
Specific hazards during
firefighting
:
Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
Smoke
Specific extinguishing
:
Use extinguishing measures that are appropriate to local
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
The exact percentages of disclosed substances are withheld as trade secrets.
SECTION 4. FIRST AID MEASURES
SECTION 5. FIREFIGHTING MEASURES
2 / 9
SAFETY DATA SHEET
BZ7920 ZC ALL PURPOSE CLNR ZUALL32 12/QT
Version 3.0
Revision Date 04/20/2016
Print Date 05/09/2017
methods
circumstances and the surrounding environment.
Further information
:
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
protective equipment and
emergency procedures
:
Use personal protective equipment.
Ensure adequate ventilation.
Refer to protective measures listed in sections 7 and 8.
Environmental precautions
:
Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
Advice on safe handling
:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Avoid contact with skin and eyes.
Avoid exposure - obtain special instructions before use.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Keep away from oxidizing agents and strongly acid or alkaline
materials.
Respiratory protection
:
In the case of vapour formation use a respirator with an
approved filter.
SECTION 6. ACCIDENTAL RELEASE MEASURES
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
3 / 9
Loading...