Zep BZ7367 User Manual

SAFETY DATA SHEET

BZ7367 ALK DRAIN OPENER R02701 12QT/CS

Version 1.3

Revision Date 04/05/2018

Print Date 09/05/2018

Material name

:

BZ7367 ALK DRAIN OPENER R02701 12QT/CS
Material number

:

000000000001041423

Company

:

Zep Inc.

Address

:

350 Joe Frank Harris Parkway, SE
Emerson, GA 30137
Telephone

:

404-352-1680

Emergency telephone numbers

For SDS Information

:

Compliance Services 1-877-428-9937

For a Medical Emergency

:

877-541-2016 Toll Free - All Calls Recorded

For a Transportation
Emergency

:

CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616

Recommended use

:

Drain and Sewer Care
Appearance

liquid

Colour

dark red

Odour

odourless

Skin corrosion

:

Category 1

Serious eye damage

:

Category 1

Hazard pictograms

:

Signal word

:

Danger

Hazard statements

:

H314 Causes severe skin burns and eye damage.

Precautionary statements

:

Prevention:
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye
protection/ face protection.

Response:

P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT
induce vomiting.

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Manufacturer or supplier's details

Recommended use of the chemical and restrictions on use

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

GHS Classification

GHS label elements

1 / 11

SAFETY DATA SHEET

BZ7367 ALK DRAIN OPENER R02701 12QT/CS

Version 1.3

Revision Date 04/05/2018

Print Date 09/05/2018

P303 + P361 + P353 IF ON SKIN (or hair): Take off
immediately all contaminated clothing. Rinse skin with
water/shower.
P304 + P340 + P310 IF INHALED: Remove person to fresh air
and keep comfortable for breathing. Immediately call a
POISON CENTER/doctor.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON
CENTER/doctor.
P363 Wash contaminated clothing before reuse.
Disposal:
P501 Dispose of contents/container in accordance with local
regulation.
Substance / Mixture

:

Mixture

Chemical name

CAS-No.

Concentration [%]

sodium hydroxide

1310-73-2

>= 30 - < 50

General advice

:

Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.

If inhaled

:

If unconscious, place in recovery position and seek medical
advice.
If symptoms persist, call a physician.

In case of skin contact

:

Immediate medical treatment is necessary as untreated
wounds from corrosion of the skin heal slowly and with
difficulty.
Wash off immediately with plenty of water for at least 15
minutes.
Remove contaminated clothing and shoes.
Wash contaminated clothing before reuse.
If skin irritation persists, call a physician.

In case of eye contact

:

Small amounts splashed into eyes can cause irreversible
tissue damage and blindness.
Rinse immediately with plenty of water, also under the eyelids,
for at least 15 minutes.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components

The exact percentages of disclosed substances are withheld as trade secrets.

SECTION 4. FIRST AID MEASURES

2 / 11

SAFETY DATA SHEET

BZ7367 ALK DRAIN OPENER R02701 12QT/CS

Version 1.3

Revision Date 04/05/2018

Print Date 09/05/2018

If swallowed

:

Keep respiratory tract clear.
Do NOT induce vomiting.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Take victim immediately to hospital.

Most important symptoms
and effects, both acute and
delayed

:

Effects are dependent on exposure (dose, concentration,
contact time).
Effects are immediate and delayed.
Symptoms may include irritation, redness, pain, and rash.
Causes severe skin burns and eye damage.
Review section 2 of SDS to see all potential hazards.

Notes to physician

:

Treat symptomatically. Symptoms may be delayed.

Suitable extinguishing media

:

Dry chemical

Unsuitable extinguishing
media

:

High volume water jet

Specific hazards during
firefighting

:

Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion
products

:

No hazardous combustion products are known

Specific extinguishing
methods

:

Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.

Further information

:

Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.

Special protective equipment
for firefighters

:

Wear self-contained breathing apparatus for firefighting if
necessary.

Personal precautions,
protective equipment and
emergency procedures

:

Use personal protective equipment.

Environmental precautions

:

Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Prevent product from entering drains.

Methods and materials for
containment and cleaning up

:

Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.

SECTION 5. FIREFIGHTING MEASURES

SECTION 6. ACCIDENTAL RELEASE MEASURES

3 / 11

SAFETY DATA SHEET

BZ7367 ALK DRAIN OPENER R02701 12QT/CS

Version 1.3

Revision Date 04/05/2018

Print Date 09/05/2018

Advice on safe handling

:

Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
To avoid spills during handling keep bottle on a metal tray.
Dispose of rinse water in accordance with local and national
regulations.

Conditions for safe storage

:

Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
This product is formulated for use on hard metal surfaces.
This product does contain a reducing agent(s) that may
corrode soft metals. This product should be stored in its
original packaging or containers of similar construction, and
not in metal vessels.

Materials to avoid

:

Oxidizing agents
Store and keep away from bases and alkalies.
Do not store near acids.

Components

CAS-No.

Value type
(Form of
exposure)

Control
parameters /
Permissible
concentration

Basis

sodium hydroxide

1310-73-2

C

2 mg/m3

ACGIH

C

2 mg/m3

NIOSH REL

TWA

2 mg/m3

OSHA Z-1

C

2 mg/m3

OSHA P0

C

2 mg/m3

CAL PEL

Engineering measures

:

effective ventilation in all processing areas

Respiratory protection

:

Use respiratory protection unless adequate local exhaust
ventilation is provided or exposure assessment demonstrates
that exposures are within recommended exposure guidelines.

SECTION 7. HANDLING AND STORAGE

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

Personal protective equipment

Hand protection

4 / 11