Zep B2683838 User Manual

SAFETY DATA SHEET

A07297 ZEP FOAMING COIL 020201 NI 20N18

Version 3.0

Revision Date 04/23/2018

Print Date 02/15/2021

Material name

:

A07297 ZEP FOAMING COIL 020201 NI 20N18
Material number

:

000000000000020201

Company

:

Zep Inc.

Address

:

350 Joe Frank Harris Parkway, SE
Emerson, GA 30137
Telephone

:

404-352-1680

Emergency telephone numbers

For SDS Information

:

Compliance Services 1-877-428-9937

For a Medical Emergency

:

877-541-2016 Toll Free - All Calls Recorded

For a Transportation
Emergency

:

CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616

Recommended use

:

Specialty Cleaner and Remover
Appearance

Aerosol containing a liquefied gas

Colour

colourless, clear

Odour

characteristic

Gases under pressure

:

Liquefied gas

Skin corrosion

:

Category 1

Serious eye damage

:

Category 1

Hazard pictograms

:

Signal word

:

Danger

Hazard statements

:

H280 Contains gas under pressure; may explode if heated.
H314 Causes severe skin burns and eye damage.

Precautionary statements

:

Prevention:
P260 Do not breathe dust or mist.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye
protection/ face protection.

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Manufacturer or supplier's details

Recommended use of the chemical and restrictions on use

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

GHS Classification

GHS label elements

1 / 11

SAFETY DATA SHEET

A07297 ZEP FOAMING COIL 020201 NI 20N18

Version 3.0

Revision Date 04/23/2018

Print Date 02/15/2021

P251 Pressurized container: Do not pierce or burn, even after
use.

Response:

P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT
induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off
immediately all contaminated clothing. Rinse skin with water.
P304 + P340 + P310 IF INHALED: Remove person to fresh air
and keep comfortable for breathing. Immediately call a
POISON CENTER/doctor.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON
CENTER/doctor.
P363 Wash contaminated clothing before reuse.
Storage:
P410 + P412 Protect from sunlight. Do not expose to
temperatures exceeding 50 °C/ 122 °F.
P403 Store in a well-ventilated place.
Disposal:
P501 Dispose of contents/container in accordance with local
regulation.
Substance / Mixture

:

Mixture

Chemical name

CAS-No.

Concentration [%]

1-(1-methyl-2-propoxyethoxy)propan-2-ol

29911-27-1

>= 3 - < 5

butane

106-97-8

>= 3 - < 5

propane-1,2-diol

57-55-6

>= 1 - < 3

propane

74-98-6

>= 1 - < 3

General advice

:

Do not leave the victim unattended.
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.

If inhaled

:

If unconscious, place in recovery position and seek medical
advice.
If symptoms persist, call a physician.

In case of skin contact

:

Wash off immediately with plenty of water for at least 15
minutes.
If skin irritation persists, call a physician.

In case of eye contact

:

Remove contact lenses.
Rinse immediately with plenty of water for at least 15 minutes.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components

The exact percentages of disclosed substances are withheld as trade secrets.

SECTION 4. FIRST AID MEASURES

2 / 11

SAFETY DATA SHEET

A07297 ZEP FOAMING COIL 020201 NI 20N18

Version 3.0

Revision Date 04/23/2018

Print Date 02/15/2021

Keep eye wide open while rinsing.

If swallowed

:

Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.

Most important symptoms
and effects, both acute and
delayed

:

Effects are immediate and delayed.
Effects are dependent on exposure (dose, concentration,
contact time).
Symptoms may include blistering, irritation, burns, and pain.
Causes severe skin burns and eye damage.
Review section 2 of SDS to see all potential hazards.

Notes to physician

:

Treat symptomatically. Symptoms may be delayed.

Suitable extinguishing media

:

Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical

Unsuitable extinguishing
media

:

High volume water jet

Specific hazards during
firefighting

:

Do not allow run-off from fire fighting to enter drains or water
courses.

Hazardous combustion
products

:

Carbon dioxide (CO2)
Carbon monoxide
Smoke

Specific extinguishing
methods

:

Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.

Further information

:

Standard procedure for chemical fires.

Special protective equipment
for firefighters

:

Wear self-contained breathing apparatus for firefighting if
necessary.

Personal precautions,
protective equipment and
emergency procedures

:

Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.

Environmental precautions

:

Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for

:

Soak up with inert absorbent material (e.g. sand, silica gel,

SECTION 5. FIREFIGHTING MEASURES

SECTION 6. ACCIDENTAL RELEASE MEASURES

3 / 11

SAFETY DATA SHEET

A07297 ZEP FOAMING COIL 020201 NI 20N18

Version 3.0

Revision Date 04/23/2018

Print Date 02/15/2021

containment and cleaning up

acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.

Advice on safe handling

:

For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Dispose of rinse water in accordance with local and national
regulations.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Always replace cap after use.
Do not breathe vapours or spray mist.

Conditions for safe storage

:

BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
Keep in a dry, cool and well-ventilated place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
No smoking.

Materials to avoid

:

Do not freeze.
Store and keep away from, oxidizing agents and acids.

Components

CAS-No.

Value type
(Form of
exposure)

Control
parameters /
Permissible
concentration

Basis
butane

106-97-8

TWA

800 ppm
1,900 mg/m3

NIOSH REL

TWA

800 ppm
1,900 mg/m3

OSHA P0

PEL

800 ppm
1,900 mg/m3

CAL PEL
propane-1,2-diol

57-55-6

TWA

10 mg/m3

US WEEL

propane

74-98-6

TWA

1,000 ppm

ACGIH

TWA

1,000 ppm
1,800 mg/m3

NIOSH REL

TWA

1,000 ppm
1,800 mg/m3

OSHA Z-1
TWA

1,000 ppm

OSHA P0

SECTION 7. HANDLING AND STORAGE

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

4 / 11