Zep B2411891 User Manual
SAFETY DATA SHEET
ZEP AVIATION RTU CLEANER DISINFECTANT
Version 1.5
Revision Date 04/27/2020
Print Date 10/27/2020
Material name
:
ZEP AVIATION RTU CLEANER DISINFECTANT
EPA ID Number:
6836-152-1270
Material number
:
H02501
Company
:
Zep, Inc.
Address
:
350 Joe Frank Harris Parkway, SE
Emerson, GA 30137
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Appearance
liquid
Colour
green
Odour
pleasant
Substance / Mixture
:
Mixture
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
Recommended use of the chemical and restrictions on use
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
Not a hazardous substance or mixture.
GHS label elements
Not a hazardous substance or mixture.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
No hazardous ingredients
1 / 10
SAFETY DATA SHEET
ZEP AVIATION RTU CLEANER DISINFECTANT
Version 1.5
Revision Date 04/27/2020
Print Date 10/27/2020
General advice
:
Do not leave the victim unattended.
Show this safety data sheet to the doctor in attendance.
Move out of dangerous area.
Get medical attention if symptoms occur.
If inhaled
:
If unconscious, place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
In case of skin contact
:
Wash off immediately with soap and plenty of water.
If skin irritation persists, call a physician.
In case of eye contact
:
Remove contact lenses.
Protect unharmed eye.
If eye irritation persists, consult a specialist.
Rinse thoroughly with plenty of water for at least 15 minutes
and consult a physician.
If swallowed
:
Keep respiratory tract clear.
If swallowed, call a poison control centre or doctor
immediately.
Clean mouth with water and drink afterwards plenty of water.
Do not induce vomiting without medical advice.
Never give anything by mouth to an unconscious person.
Most important symptoms
and effects, both acute and
delayed
:
Effects may be delayed, symptoms may include minor eye or
skin irritation.
Overexposure may cause mild eye or skin irritation.
Notes to physician
:
Treat symptomatically. Symptoms may be delayed.
Suitable extinguishing media
:
Water spray
Dry powder
Foam
Unsuitable extinguishing
media
:
High volume water jet
Specific hazards during
firefighting
:
Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion
products
:
No hazardous combustion products are known
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Standard procedure for chemical fires.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
SECTION 4. FIRST AID MEASURES
SECTION 5. FIREFIGHTING MEASURES
2 / 10
SAFETY DATA SHEET
ZEP AVIATION RTU CLEANER DISINFECTANT
Version 1.5
Revision Date 04/27/2020
Print Date 10/27/2020
Personal precautions,
protective equipment and
emergency procedures
:
Ensure adequate ventilation.
Wear respiratory protection.
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains, inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
Advice on safe handling
:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Provide sufficient air exchange and/or exhaust in work rooms.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Materials to avoid
:
No materials to be especially mentioned.
Engineering measures
:
effective ventilation in all processing areas
Respiratory protection
:
In the case of vapour formation use a respirator with an
approved filter.
Material
:
Protective gloves
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Eye protection
:
Safety glasses
Skin and body protection
:
Choose body protection according to the amount and
concentration of the dangerous substance at the work place.
No special protection is required.
SECTION 6. ACCIDENTAL RELEASE MEASURES
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
Hand protection
3 / 10
Loading...