Zep B2395938 User Manual

SAFETY DATA SHEET

ZEP FRESHEN DISINFECTANT SPRAY MIST

Version 1.0

Revision Date 05/08/2020

Print Date 08/31/2020

Material name

:

ZEP FRESHEN DISINFECTANT SPRAY MIST

EPA ID Number:

498-134-1270
Material number

:

000000000001050017

Company

:

Zep, Inc.

Address

:

350 Joe Frank Harris Parkway, SE
Emerson, GA 30137
Telephone

:

404-352-1680

Emergency telephone numbers

For SDS Information

:

Compliance Services 1-877-428-9937

For a Medical Emergency

:

877-541-2016 Toll Free - All Calls Recorded

For a Transportation
Emergency

:

CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616

Appearance

Aerosol containing a liquefied gas

Colour

clear, light yellow

Odour

characteristic

Flammable aerosols

:

Category 1

Gases under pressure

:

Liquefied gas

Eye irritation

:

Category 2A

Hazard pictograms

:

Flame

Gas cylinder

Exclamation

mark

Signal word

:

Danger

Hazard statements

:

H222 Extremely flammable aerosol.
H280 Contains gas under pressure; may explode if heated.
H319 Causes serious eye irritation.

Precautionary statements

:

Prevention:
P210 Keep away from heat, hot surfaces, sparks, open flames

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Manufacturer or supplier's details

Recommended use of the chemical and restrictions on use

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

GHS Classification

GHS label elements

1 / 12

SAFETY DATA SHEET

ZEP FRESHEN DISINFECTANT SPRAY MIST

Version 1.0

Revision Date 05/08/2020

Print Date 08/31/2020

and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after
use.
P264 Wash skin thoroughly after handling.
P280 Wear eye protection/ face protection.

Response:

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/
attention.
Storage:
P410 + P412 Protect from sunlight. Do not expose to
temperatures exceeding 50 °C/ 122 °F.
Disposal:
P501 Dispose of contents/container in accordance with local
regulation.
Substance / Mixture

:

Mixture

Substance / Mixture

:

Chemical Mixture

Chemical name

CAS-No.

Concentration [%]

ethanol

64-17-5

>= 60 - < 80

1,1-difluoroethane

75-37-6

>= 10 - < 30

propane

74-98-6

>= 5 - < 10

butane

106-97-8

>= 5 - < 10

General advice

:

Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.

If inhaled

:

If unconscious, place in recovery position and seek medical
advice.
If symptoms persist, call a physician.

In case of skin contact

:

Wash off with soap and water.
Wash off immediately with plenty of water for at least 15
minutes.
If on clothes, remove clothes.
Wash contaminated clothing before re-use.
If skin irritation persists, call a physician.
In case of eye contact

:

Remove contact lenses.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components

The exact percentages of disclosed substances are withheld as trade secrets.

SECTION 4. FIRST AID MEASURES

2 / 12

SAFETY DATA SHEET

ZEP FRESHEN DISINFECTANT SPRAY MIST

Version 1.0

Revision Date 05/08/2020

Print Date 08/31/2020

Protect unharmed eye.
In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.

If swallowed

:

Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.

Most important symptoms
and effects, both acute and
delayed

:

Effects are immediate and delayed.
Symptoms may include irritation, redness, pain, and rash.
Effects are dependent on exposure (dose, concentration,
contact time).
Causes serious eye irritation.
Review section 2 of SDS to see all potential hazards.

Notes to physician

:

Treat symptomatically. Symptoms may be delayed.

Suitable extinguishing media

:

Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical

Unsuitable extinguishing
media

:

High volume water jet

Hazardous combustion
products

:

Carbon dioxide (CO2)
Carbon monoxide
Smoke
Fluorine compounds
Hydrogen fluoride
Fluorocarbons

Specific extinguishing
methods

:

Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.

Further information

:

For safety reasons in case of fire, cans should be stored
separately in closed containments.
Use a water spray to cool fully closed containers.

Special protective equipment
for firefighters

:

Wear self-contained breathing apparatus for firefighting if
necessary.

Personal precautions,
protective equipment and
emergency procedures

:

Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Evacuate personnel to safe areas.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.

SECTION 5. FIREFIGHTING MEASURES

SECTION 6. ACCIDENTAL RELEASE MEASURES

3 / 12

SAFETY DATA SHEET

ZEP FRESHEN DISINFECTANT SPRAY MIST

Version 1.0

Revision Date 05/08/2020

Print Date 08/31/2020

Environmental precautions

:

Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains, inform
respective authorities.

Methods and materials for
containment and cleaning up

:

Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.

Advice on safe handling

:

Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Always replace cap after use.

Conditions for safe storage

:

BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.

Materials to avoid

:

Oxidizing agents

Components

CAS-No.

Value type
(Form of
exposure)

Control
parameters /
Permissible
concentration

Basis

ethanol

64-17-5

TWA

1,000 ppm

ACGIH

TWA

1,000 ppm
1,900 mg/m3

NIOSH REL

TWA

1,000 ppm
1,900 mg/m3

OSHA Z-1

TWA

1,000 ppm
1,900 mg/m3

OSHA P0
STEL

1,000 ppm

ACGIH

PEL

1,000 ppm
1,900 mg/m3

CAL PEL

SECTION 7. HANDLING AND STORAGE

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

4 / 12