Zep A07699 ZC User Manual

SAFETY DATA SHEET

A07699 ZC FOAMING GLS ZUFGC19A 20N19 STK

Version 3.1

Revision Date 12/14/2016

Print Date 03/09/2018

Material name

:

A07699 ZC FOAMING GLS ZUFGC19A 20N19 STK
Material number

:

000000000001046502

Company

:

Zep Inc.

Address

:

1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone

:

404-352-1680

Emergency telephone numbers

For SDS Information

:

Compliance Services 1-877-428-9937

For a Medical Emergency

:

877-541-2016 Toll Free - All Calls Recorded

For a Transportation
Emergency

:

CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616

Recommended use

:

Glass Cleaner
Appearance

Aerosol containing a liquefied gas

Colour

colourless

Odour

pleasant

Gases under pressure

:

Liquefied gas

Hazard pictograms

:

Signal word

:

Warning

Hazard statements

:

H280 Contains gas under pressure; may explode if heated.

Precautionary statements

:

Storage:
P410 + P403 Protect from sunlight. Store in a well-ventilated
place.
Disposal:
P501 Dispose of contents/ container to an approved waste
disposal plant.

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Manufacturer or supplier's details

Recommended use of the chemical and restrictions on use

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

GHS Classification

GHS label elements

1 / 11

SAFETY DATA SHEET

A07699 ZC FOAMING GLS ZUFGC19A 20N19 STK

Version 3.1

Revision Date 12/14/2016

Print Date 03/09/2018

Substance / Mixture

:

Mixture

Chemical name

CAS-No.

Concentration [%]

ethanol

64-17-5

>= 1 - < 5

butane

106-97-8

>= 1 - < 5

propan-2-ol

67-63-0

>= 1 - < 5

General advice

:

Do not leave the victim unattended.
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.

If inhaled

:

If unconscious place in recovery position and seek medical
advice.
Consult a physician after significant exposure.

In case of skin contact

:

If skin irritation persists, call a physician.
Wash off immediately with plenty of water for at least 15
minutes.
If on clothes, remove clothes.

In case of eye contact

:

Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
Rinse immediately with plenty of water for at least 15 minutes.

If swallowed

:

Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Take victim immediately to hospital.

Most important symptoms
and effects, both acute and
delayed

:

Effects may be delayed, symptoms may include minor eye or
skin irritation.
Overexposure may cause mild eye or skin irritation.

Notes to physician

:

Treat symptomatically. Symptoms may be delayed.

Suitable extinguishing media

:

Water spray jet
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components

The exact percentages of disclosed substances are withheld as trade secrets.

SECTION 4. FIRST AID MEASURES

SECTION 5. FIREFIGHTING MEASURES

2 / 11

SAFETY DATA SHEET

A07699 ZC FOAMING GLS ZUFGC19A 20N19 STK

Version 3.1

Revision Date 12/14/2016

Print Date 03/09/2018

Unsuitable extinguishing
media

:

High volume water jet

Specific hazards during
firefighting

:

Do not allow run-off from fire fighting to enter drains or water
courses.

Hazardous combustion
products

:

Carbon dioxide (CO2)
Carbon monoxide
Smoke

Specific extinguishing
methods

:

Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.

Further information

:

Standard procedure for chemical fires.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
For safety reasons in case of fire, cans should be stored
separately in closed containments.
Use a water spray to cool fully closed containers.

Special protective equipment
for firefighters

:

Wear self-contained breathing apparatus for firefighting if
necessary.

Personal precautions,
protective equipment and
emergency procedures

:

Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Evacuate personnel to safe areas.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.

Environmental precautions

:

Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.

Methods and materials for
containment and cleaning up

:

Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.

Advice on safe handling

:

Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Do not breathe vapours or spray mist.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.

SECTION 6. ACCIDENTAL RELEASE MEASURES

SECTION 7. HANDLING AND STORAGE

3 / 11

SAFETY DATA SHEET

A07699 ZC FOAMING GLS ZUFGC19A 20N19 STK

Version 3.1

Revision Date 12/14/2016

Print Date 03/09/2018

Dispose of rinse water in accordance with local and national
regulations.
Always replace cap after use.

Conditions for safe storage

:

BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Keep in a dry, cool and well-ventilated place.

Materials to avoid

:

Oxidizing agents

Components

CAS-No.

Value type
(Form of
exposure)

Control
parameters /
Permissible
concentration

Basis

ethanol

64-17-5

TWA

1,000 ppm

ACGIH

TWA

1,000 ppm
1,900 mg/m3

NIOSH REL

TWA

1,000 ppm
1,900 mg/m3

OSHA Z-1

TWA

1,000 ppm
1,900 mg/m3

OSHA P0

STEL

1,000 ppm

ACGIH

PEL

1,000 ppm
1,900 mg/m3

CAL PEL

butane

106-97-8

TWA

800 ppm
1,900 mg/m3

NIOSH REL

TWA

800 ppm
1,900 mg/m3

OSHA P0

PEL

800 ppm
1,900 mg/m3

CAL PEL

propan-2-ol

67-63-0

TWA

200 ppm

ACGIH

STEL

400 ppm

ACGIH

TWA

400 ppm
980 mg/m3

NIOSH REL

ST

500 ppm
1,225 mg/m3

NIOSH REL

TWA

400 ppm
980 mg/m3

OSHA Z-1

TWA

400 ppm
980 mg/m3

OSHA P0

STEL

500 ppm
1,225 mg/m3

OSHA P0

PEL

400 ppm
980 mg/m3

CAL PEL

STEL

500 ppm

CAL PEL

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

4 / 11