BZ7978 ZEP REACH 092524 4/1G
BZ7978 ZEP REACH 092524 4/1G
Material number
1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone
Emergency telephone numbers
Compliance Services 1-877-428-9937
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
H319 Causes serious eye irritation.
Prevention:
P264 Wash skin thoroughly after handling.
P280 Wear eye protection/ face protection.
Response:
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
Recommended use of the chemical and restrictions on use
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS label elements
1 / 10
BZ7978 ZEP REACH 092524 4/1G
Distillates (petroleum), hydrotreated light
Alcohols, C12-16, ethoxylated
Fatty acids, tall-oil, reaction products with
isopropanolamine
>= 1 - < 5
Solvent naphtha (petroleum), heavy aliph.
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
This product is formulated for use on skin but should always
be immediately washed off with plenty of water. Discontinue
use if irritation and redness develop. If conditions persist for
more than 72 hours, consult a physician.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If in eyes, rinse with water for 15 minutes.
Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Take victim immediately to hospital.
Most important symptoms
and effects, both acute and
delayed
Effects are immediate and delayed.
Symptoms may include irritation, redness, pain, and rash.
Causes serious eye irritation.
Review section 2 of SDS to see all potential hazards.
Treat symptomatically. Symptoms may be delayed.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
The exact percentages of disclosed substances are withheld as trade secrets.
SECTION 4. FIRST AID MEASURES
2 / 10
BZ7978 ZEP REACH 092524 4/1G
Suitable extinguishing media
Water spray jet
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing
media
Hazardous combustion
products
Carbon dioxide (CO2)
Carbon monoxide
Smoke
Specific extinguishing
methods
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Standard procedure for chemical fires.
Special protective equipment
for firefighters
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
protective equipment and
emergency procedures
Material can create slippery conditions.
Refer to protective measures listed in sections 7 and 8.
Use non-slip safety shoes in areas where spills or leaks can
occur.
Environmental precautions
Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
For personal protection see section 8.
Avoid contact with eyes.
Smoking, eating and drinking should be prohibited in the
application area.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
Keep container tightly closed in a dry and well-ventilated
place.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
SECTION 5. FIREFIGHTING MEASURES
SECTION 6. ACCIDENTAL RELEASE MEASURES
SECTION 7. HANDLING AND STORAGE
3 / 10