Zep 85624 User Manual
SAFETY DATA SHEET
ZEP MORADO SUPER CLEANER 4-1GL
Version 4.1
Revision Date 06/26/2018
Print Date 11/07/2018
Material name
:
ZEP MORADO SUPER CLEANER 4-1GL
Material number
:
000000000000085624
Company
:
Zep Inc.
Address
:
350 Joe Frank Harris Parkway, SE
Emerson, GA 30137
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Recommended use
:
Cleaner
Appearance
liquid
Colour
purple
Odour
ether-like
Skin corrosion
:
Category 1
Serious eye damage
:
Category 1
Hazard pictograms
:
Signal word
:
Danger
Hazard statements
:
H314 Causes severe skin burns and eye damage.
Precautionary statements
:
Prevention:
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye
protection/ face protection.
Response:
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT
induce vomiting.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
Recommended use of the chemical and restrictions on use
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS label elements
1 / 12
SAFETY DATA SHEET
ZEP MORADO SUPER CLEANER 4-1GL
Version 4.1
Revision Date 06/26/2018
Print Date 11/07/2018
P303 + P361 + P353 IF ON SKIN (or hair): Take off
immediately all contaminated clothing. Rinse skin with
water/shower.
P304 + P340 + P310 IF INHALED: Remove person to fresh air
and keep comfortable for breathing. Immediately call a
POISON CENTER/doctor.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON
CENTER/doctor.
P363 Wash contaminated clothing before reuse.
Disposal:
P501 Dispose of contents/container in accordance with local
regulation.
Substance / Mixture
:
Mixture
Chemical name
CAS-No.
Concentration [%]
Alcohols, C9-11, ethoxylated
68439-46-3
>= 1 - < 5
2-butoxyethanol
111-76-2
>= 1 - < 5
sodium hydroxide
1310-73-2
>= 1 - < 5
Fatty acids, tall-oil, sodium salts
61790-45-2
>= 1 - < 5
General advice
:
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
Get medical attention immediately.
If inhaled
:
If unconscious, place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
In case of skin contact
:
Immediate medical treatment is necessary as untreated
wounds from corrosion of the skin heal slowly and with
difficulty.
Wash off immediately with plenty of water for at least 15
minutes.
If skin irritation persists, call a physician.
Remove contaminated clothing and shoes.
Wash contaminated clothing before reuse.
In case of eye contact
:
Small amounts splashed into eyes can cause irreversible
tissue damage and blindness.
Rinse immediately with plenty of water, also under the eyelids,
for at least 15 minutes.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
The exact percentages of disclosed substances are withheld as trade secrets.
SECTION 4. FIRST AID MEASURES
2 / 12
SAFETY DATA SHEET
ZEP MORADO SUPER CLEANER 4-1GL
Version 4.1
Revision Date 06/26/2018
Print Date 11/07/2018
Continue rinsing eyes during transport to hospital.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed
:
Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Take victim immediately to hospital.
Do not give milk or alcoholic beverages.
Most important symptoms
and effects, both acute and
delayed
:
Effects are immediate and delayed.
Symptoms may include blistering, irritation, burns, and pain.
Effects are dependent on exposure (dose, concentration,
contact time).
Causes severe skin burns and eye damage.
Review section 2 of SDS to see all potential hazards.
Notes to physician
:
Treat symptomatically. Symptoms may be delayed.
Suitable extinguishing media
:
Dry chemical
Water spray jet
Alcohol-resistant foam
Carbon dioxide (CO2)
Unsuitable extinguishing
media
:
High volume water jet
Specific hazards during
firefighting
:
Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
Smoke
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Standard procedure for chemical fires.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
:
Use personal protective equipment.
SECTION 5. FIREFIGHTING MEASURES
SECTION 6. ACCIDENTAL RELEASE MEASURES
3 / 12
SAFETY DATA SHEET
ZEP MORADO SUPER CLEANER 4-1GL
Version 4.1
Revision Date 06/26/2018
Print Date 11/07/2018
protective equipment and
emergency procedures
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
Advice on safe handling
:
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Do not breathe vapours or spray mist.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Store and keep away from, oxidizing agents and acids.
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
2-butoxyethanol
111-76-2
TWA
20 ppm
ACGIH
TWA
5 ppm
24 mg/m3
NIOSH REL
TWA
50 ppm
240 mg/m3
OSHA Z-1
TWA
25 ppm
120 mg/m3
OSHA P0
PEL
20 ppm
97 mg/m3
CAL PEL
sodium hydroxide
1310-73-2
C
2 mg/m3
ACGIH
C
2 mg/m3
NIOSH REL
TWA
2 mg/m3
OSHA Z-1
C
2 mg/m3
OSHA P0
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
4 / 12
Loading...