Page 2
- Exhausted batteries are to be removed from the product;
- The supply terminals are not to be short-circuited;
- Dierent types of batteries or new and used batteries are not to be mixed;
- Only batteries of the same or equivalent type as recommended are to be used.
- For longer battery life, it is recommend to use alkaline batteries.
- If the unit is not to be used for a prolonged period, such as a month of longer, remove the
batteries to prevent possible leakage.
Battery installation:
1. Use a Philips screwdriver to unscrew the battery
compartment cover located on the base of the unit.
2. Insert 4 x 1.5V, AA new batteries, ensuring the
correct polarity as indicated on the sketch.
3. Replace the cover and tighten the screws.
SIZE AA 1.5VX4
+
+
Operating Instructions:
Enjoy the Dalek with your Bluetooth® enabled smartphone.
1. To work with this product, please download our FREE
application using the Google Play
TM
store app or App StoreSM
with searching the keywords “DR263”.
2. Press and hold the On/O button for 2 seconds.
Once the device is activated, the head will returns to the
middle position and the headlights light on.
Attention: DO NOT rotate the head by hand as it will damage
the mechanism.
1) The device will be in the Mode 1
2) Press once again will enter Mode 2
3) Press once again will enter Mode 3
4) Press once again will go back to Mode 1 and so on.
Press and hold On/O Button for 2 seconds will turn o the Dalek.
Note : Turn o the unit if not in use.
Dalek will move forward, unless it hits a solid object with sucient force to activate the two
sensors on the front end of the base. If the sensors are activated, it will retreat.
DR263 battery
replacement.
SEARCH “DR263”