Setting Instruction Chronograph Valjoux 7751
Please be sure to check the ZENO -WATCH internet Web site for the latest listing of
World Wide Service Centres at www.zeno -watch.ch
Thank you for purchasing an original ZENO Timekeeper. To ensure correct use, please read these
instructions carefully:
Indicators a=24h-display; b=day; c=month;
d=date; e=moon-phase; f=second-counter;
g=minute-counter; h=hour-counter; i=smallsecond display
Specifications precision self-winding movement (automatic)
Swiss Made, 25 jewels, 28'800 pulsation per hour, Incabloc anti shock system, Nivaflex spring, tight tolerance of adjustment,
power reserve till 42 hours
The Chronograph is an independent timing system for brief
intervals of time.
Activate the Chronograph
Press pusher B
Stop the Chronograph
Press pusher B (can be activated again, by pusher A)
Reset to Zero
Press pusher C
(Chronograph functions are stopped and reset to zero)
Settings
Neutral Pos. 1 winding position (unscrew crown first)
Time Pos. 3 Adjust hour and minute by turning the
crown A clock - or anticlockwise
Day Depress the recessed button D
Date Pos. 2 turn A anticlockwise (quick adjustment)
Month Pos. 2 turn A anticlockwise (changing after 31)
Moon phase Pos. 2 turn A clockwise (quick adjustment)
Warning
Correction cannot be effected between 8pm and 2am. While
turning the hands please observe that date will change at
12pm (midnight)
The watch will now be set correctly and running. The automatic movement will keep the watch wound as long
as the watch is worn. Note Before using the Chronograph make sure the watch has been wound up!
Be sure to use the watch with the crown pressed in (normal position). If your watch has a screw type crown, be sure to tighten the crown completely. Do not operate the crown with wet fingers or when the
watch is wet. Water may enter the watch and compromise water resistance. If moisture has entered the watch,
or it the inside to the crystal is fogged up and does not become clear within a day, or seawater enters the
watch, immediately the watch to a Zeno Service Centre for repair. Leaving the watch in such a state will allow
corrosion to form inside. Keep you watch clean. Dust and dirt tend to collect in gaps in the back of the case or
band. Accumulated dust and dirt may cause corrosion and soil your clothing. Clean the watch occasionally.
Use a soft dry cloth to wipe off dirt, perspiration and water from the case and crystal. Do not use the watch in
places where it is exposed to high temperature. Doing so may result in deterioration of the watch or parts. Do
not place the watch to a magnet. Timekeeping will become inaccurate. Store your watch in a dry place when
you are not using it. Further information see guarantee card!
Have you got a problem with your watch?
Your nearest ZENO Represent is usually the best place to contact for help, and it should certainly be the first.
1. Please contact first your ZENO dealer and ask for a Service -Centre in your country.
(You will find the address of your dealer in the guarantee certificate)
2. In case there is no Service-Centre in your country, please send the watch back to your dealer or to
the worldwide Service-Centre:
ZENO-WATCH BASEL
Service-Centre - P.O. Box
CH-4013 Basel (Switzerland)
Please send your watch, carefully packed, together with $ 10.- in cash (to cover return postage and handling
charges), the guarantee certificate, completed with your corre ct name and return address.
For costume reasons please declare the goods to be R E P A I R E D !!!
Repairs without original and signed international ZENO guarantee certificate or after the guarantee period will
be charged. Owner will be charged for postage, insurance and such coasts as may be incurred outside the
normal repair costs under the guarantee. For those customers requiring their watches to be repaired in
countries other than those where the purchase was originally made, repair services are available though it is to
be acknowledged that it might take somewhat longer than normal.
Our service is, of course, also available after the guarantee period has expired for repair and maintenance work
against an appropriate charge. [Payment in advance]. Sometimes it is cheaper to contact first a qualified
watchmaker in your area. (He must have experience with Swiss Watches!) Please ask your watchmaker for a
free estimate!
Please note that ZENO only ensures full warranty when the ZENO watch is bought directly from one of the
authorized dealers. The warranty certificate must be properly stamped, signed with the dealers name and show
the exact date of purchase.
Only authorized ZENO retailer or other authorized Service Centres are qualified to ensure proper after-sales
service and are authorized to provide the warranty services in accordance to ZENO quality standards.
The water resistance is only guaranteed if the watch is declare by "waterproof" and the watch has not been
subjected to severe shocks, the crystal and crown are not damaged, and the instructions have been carefully
followed.
WATER RESIST (water protected) = This watch is protected against water drops (the watch has to be protected
against water!)
WATERRESISTANT 30M (3ATM) = This watch you can use for car washing, bathing, shower, mountain
climbing, parachuting, hang gliding, or skiing - it is resistant against perspiration, water vapour, rain drops.
WATERRESISTANT 100 M (10ATM) = This watch you can use for water sport, snocheling, swimming, car
washing, bathing, shower, mountain climbing, parachuting, hang gliding, skiing - it is resistant against
perspiration...
WATERRESISTANT 200 M (20ATM) = This watch you can use for diving (without equipment), water
sport, snocheling, swimming, car washing, bathing, shower, mountain climbing, parachuting, hang
gliding, skiing - it is resistant against perspiration, water vapour, rain drops.
Loading...