Zenoah SRTZ2610 User Manual
848A3393B0 (803)
March 2008
APPLICABLE SERIAL NUMBERS:
DRIVE UNIT
SRTZ2610: 80200101 and up
SRTZ2610F: 80200101 and up
LRTZ2610: 80300101 and up
ENGINE UNIT
80200101 and up
NOTE :
1. Use ZENOAH genuine parts as specified in the parts list for repair and/or replacement.
2. ZENOAH does not warrant the machines, which have been damaged by the use of any parts other
than those specified by the company.
3. When placing parts orders for repair and/or replacement, check if the model name and the serial
number are applicable to those specified in the parts list, then use parts number described in the
parts list.
4. The contents described in the parts list are accurate as of the date and may change due to
improvement.
5. The parts for the machine shall be supplied ten (10) years after the machine is discontinued. [It is
possible that some specific parts may be subject to change of their delivery term and list price
within the limit of ten (10) years after the machine is discontinued. It is also possible that some
parts may be available even after the limit of ten (10) years.]
SHORT REACH TRIMMER
SRTZ2610
SRTZ2610F
LRTZ2610
PARTS LIST
SRTZ2610
Fig.1 DRIVE UNIT
Fig.2 CUTTING UNIT
SRTZ2610
1 T3075-12100 PIPE COMP. 1
2 T3075-12210 SHAFT 1
3 T3076-11330 GRIP ASSY 1
4 T3300-17202 HANGER COMP. 1
5 8488052000 • SCREW 1
10 848A3390R0 NAME-PLATE 1
11 8488X10030 CAUTION-PLATE 1
12 T3110-14000 HANDLE ASSY 1
13 0263-90530 • SCREW 4
16 848J823610 STRAP ASSY 1
17 8488U00010 TOOL-SET 1
18 1030-91340 • DRIVER 1
19 T4017-91130 • SOCKET 1
20 09007-00425 • WRENCH 1
21 3540-91120 • SPANNER 1
Key#
PART NUMBER
DESCRIPTION
Q'TY
/UNIT
NOTE Key#
PART NUMBER
DESCRIPTION
Q'TY
/UNIT
NOTE
Fig.1 DRIVE UNIT
1 6598-13110 LEVER, clamp 1
2 0290-20615 WASHER 1 M6
3 6782-13650 WASHER 1 6x16x2.0
4 6782-13141 ANGLE ADJUSTER 1
5 0225-10612 BOLT 2 M6x12
6 6782-13200 CASING A SET 1
7 ––––––––– • CASING A 1
8 6782-13220 • PLATE 1
9 3199-13350 GREESE FITTING 3
10 T3078-13250 LABEL 1
11 0263-10408 SCREW 2 M4x8
12 6598-13320 COVER 1
13 6598-13330 SNAP RING 1
14 6782-13340 BEBEL GEAR 1
15 04065-02612 SNAP RING 1
16 06004-06000 BEARING 1
17 6782-13370 CRANK SHAFT 1
18 04064-02815 SNAP RING 1
19 T3078-13410 BLADE 2
20 6782-13430 BEARING 1 608Z
23 6782-13460 FELT 1
24 3884-11750-10 SCREW 1
25 3880-11780 WASHER 6
26 6598-13510 SCREW 5 L17
27 6598-13530 SCREW 2 M5x20
28 T3078-13540 GUIDE PLATE 1
29 6782-13550 PLATE 1
30 6782-14470 NUT 2 M5
31 3880-11790 NUT 6 M6
32 6782-13650 WASHER 1 6x15x2.0
33 6598-13430 BEARING 1 608 2RS
34 04065-02212 SNAP RING 1
35 T4008-06010 SHAFT KIT 1
Key#
PART NUMBER
DESCRIPTION
Q'TY
/UNIT
NOTE
44 0280-10605 • NUT 1 M6
45 0290-20615 WASHER 1
46 6598-13620 O-RING 1 P41
47 04065-02612 SNAP RING 1
48 06004-06000 BEARING 1
49 848A2Z61A1 CASING B 1
50 6782-13650 WASHER 1
51 0225-10612 BOLT 1 M6x12
52 6782-13720 WASHER 1 5x10x1.0
53 01252-30510 BOLT 1 M5x10
54 3350-21320 BOLT 1 M5x30
55 6782-13810 JOINT 1
56 6598-13820 GEAR SHAFT B 1
57 6782-13830 BEARING 2 6900RS
58 04065-02212 SNAP RING 1
59 6782-13850 BEVEL GEAR 1
60 6598-13330 SNAP RING 1
61 6598-13860 PACKING 1
62 6598-13871 PLATE 1
63 0263-10410 SCREW 2 M4x10
64 T3078-13910 BLADE COVER 1
65 6782-06010 COVER SET 1
66 6782-13441 • COVER 1
67 6782-13470 • GASKET 1
68 848A2R61C0 • BOLT 4 M4x12
Key#
PART NUMBER
DESCRIPTION
Q'TY
/UNIT
NOTE
Fig.2 CUTTING UNIT
Loading...