Zenoah SGCZ2610DL, SGCZ2610DW User Manual
848JN593B0 (803)
Mar. 2008
APPLICABLE SERIAL NUMBERS:
SGCZ2610DL : 80200001 and up
SGCZ2610DW : 80200001 and up
NOTE :
1. Use ZENOAH genuine parts as specified in the parts list for repair and/or replacement.
2. ZENOAH does not warrant the machines, which have been damaged by the use of any parts other
than those specified by the company.
3. When placing parts orders for repair and/or replacement, check if the model name and the serial
number are applicable to those specified in the parts list, then use parts number described in the
parts list.
4. The contents described in the parts list are accurate as of the date and may change due to
improvement.
5. The parts for the machine shall be supplied ten (10) years after the machine is discontinued. [It is
possible that some specific parts may be subject to change of their delivery term and list price
within the limit of ten (10) years after the machine is discontinued. It is also possible that some
parts may be available even after the limit of ten (10) years.]
RECIPROCATORS
SGCZ2610DL
SGCZ2610DW
PARTS LIST
SGCZ2610DL
Fig.1 DRIVE UNIT
Fig.2 CASE UNIT
SGCZ2610DL
1 T3065-11000 MISSION ASSY 1
2 3805-11102 • CASE COMP, rear 1
3 06002-06001 • BEARING 2
4 06000-06001 • BEARING 2
5 04065-02812 • RING 1
6 3805-11211 • CASE, front 1
7 0225-00608 • BOLT 2
8 01252-30520 • BOLT 6
9 3805-11310 • DRUM 1
10 3805-11320 • GEAR, pinion 1
11 3180-13330 • RING 1
12 3805-11331 • GEAR, idler 1
13 2850-55211 • WASHER 2
14 3805-11360 • GEAR, wheel 1
15 3130-13270 • RING 1
16 3805-11412 • GASKET 1
17 3805-12101 PIPE COMP. 1
18 3805-12131 • CUSHION 1 ❈
19 3565-11341 CAP 1
20 0263-90510 SCREW 2
21 3805-12210 SHAFT 1
22 3805-11511 COVER, right 1
23 3805-11521 COVER, left 1
24 2200-76210 SCREW 3
26 T3101-11330 GRIP ASS’Y 1
31 848JN590R0 PLATE, name 1
32 848JN590X0 LABEL 1
40 T3110-14000 HANDLE ASSY 1
41 0263-90530 • SCREW 4
42 848JL066A4 GUARD 1
43 848JN366E0 GUARD 1
Key# PART NUMBER DESCRIPTION
Q'TY
/UNIT
NOTE
44 848JN366C0 BRACKET 1
45 T4950-63040 BOLT TORX 2 M6x30
46 T3300-17202 HANGER ASSY 1
47 T3300-17212 • HANGER 1
48 T3300-17222 • CLAMP 1
49 8488052000 SCREW 1
50 8488U00170 TOOL SET 1
51 T4017-91130 • SOKET 1
52 09007-00425 • WRENCH 1
53 09007-00528 • WRENCH 1
54 3540-91120 • SPANNER 1
55 1030-91340 • DRIVER 1
56 848JL092B1 COVER 1
57 848J823610 STRAP ASSY 1
89 T4950-62040 BOLT 4
Key# PART NUMBER DESCRIPTION
Q'TY
/UNIT
NOTE
Fig.1 DRIVE UNIT
31 848JN36110 CASE ASSY 1
32 3974-98102 • CASE COMP, cutter 1
33 3974-13102 • • CASE COMP, cutter 1
34 3805-13130 • • • SEAL 1
35 06000-00608 • • BEARING 1
36 06000-06804 • • BEARING 2
37 3805-13930 • • PINION 1
38 06000-06000 • • BEARING 2
39 3180-13330 • • RING 1
40 04065-02612 • • RING 1
41 3805-13940 • • PACKING 1
42 3805-13951 • • SPACER 1
43 3805-13200 • SHAFT COMP. 1
44 3805-13230 • • SEAL 1
45 04064-02012 • RING 1
46 3805-13412 • ARM, lower 1
47 8488R261M3 • CONROD 2
48 3805-13510 • SHAFT, inner 1
49 3805-13520 • NUT 1
50 3805-13550 • SHIM, 0.3t 0~1
51 3805-13560 • SHIM 1
52 3805-13570 • SHIM, 0.2t 0~1
53 3805-13580 • SHIM, 0.1t 0~1
54 3805-13612 • ARM, upper 1
55 3805-13711 • CRANKSHAFT 1
56 3805-13720 • GEAR 1
Key# PART NUMBER DESCRIPTION
Q'TY
/UNIT
NOTE
57 01641-20812 • WASHER 1
58 3805-13750 • BOLT 1
59 T3065-13800 • COVER COMP. 1
60 3805-13840 • • SEAL 1
61 06000-00608 • • BEARING 2
62 0263-00610 • SCREW 1
63 01642-20608 • WASHER 1
64 3805-13910 • GASKET 1
65 01252-40520 • BOLT 3
66 01010-50635 • BOLT 1
67 01252-70514 • SCREW 1
69 3975-13990 • LABEL 1
70 3805-13590 SHIM 1
71 8488Z07051 BLADE 2
72 01252-40608 BOLT 8
73 3805-15140 STABILIZER 1
74 0263-30508 SCREW 4
Key# PART NUMBER DESCRIPTION
Q'TY
/UNIT
NOTE
Fig.2 CASE UNIT
❈ Use Threebond 1521 for adhesion.
Loading...