Zenoah SGCZ2600 User Manual
SGCZ2600DL/SGCZ2600DW
848JN093A1 (704)
OWNER’S MANUAL
RECIPROCATORS
G
G
B
B
SGCZ2600DL
SGCZ2600DW
GB-1
SGCZ2600DL/SGCZ2600DW
EC DECLARATION OF COMFORMITY
We, ZENOAH CO., LTD.
1-9, Minamidai, Kawagoe, Saitama, Japan
declare in sole responsibility that the following products referred to
in this declaration conform with
DIRECTIVE 89/336/EEC, 98/37/EC
EN ISO 11806 : 1997 2000 / 14 / EC Internal control production.
The products referred are :
DESIGNATION : RECIPROCATORS
MODELS : SGCZ2600DL, SGCZ2600DW
SERIAL NUMBERS : SGCZ2600DL 100101 and up
SGCZ2600DW 50100101 and up
The company named above will keep on file the following technical
documentation for any inspection furpose.
· Operation instructions as confirmed
· Plans and Drawings
· Description of measures designed to ensure conformity
· Other technical documentation :
Specification sheet
Inspection standard
:
Saitama, Japan, 1st April 2007
Masahiko GOUDA
General Manager, Quality Assurance Department
EXPLANATION OF SYMBOLS AND SAFETY WARNINGS
WARNING!!!
RISK OF DAMAGING HEARING
Wear head, eye and ear protection.
MODEL
EN27917
LpA
SOUND LEVEL
ISO 10884
LwA
measured
guaranteed
SGCZ2600DL 25.4 cm386 dB(A) 104.93 dB(A) 106 dB(A) 5.9 m/s27.0 m/s
SGCZ2600DW 25.4 cm386 dB(A) 104.93 dB(A) 106 dB(A) 3.3 m/s27.1 m/s
VIBRATION LEVEL
ISO 7916
idling
racing
2
2
GB-2
APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION
DIRECTIVE 97/68/EC AMENDED 2002/88/EC
e13*97/68SH2G3*2002/88*0094*03
SGCZ2600DL/SGCZ2600DW
SAFETY FIRST
Instructions contained in warnings within this manual marked
with a
into consideration to prevent possible serious bodily injury, and
for this reason you are requested to read all such instructions
carefully and follow them without fail.
WARNINGS IN THE MANUAL
This mark indicates instructions, which must be followed in order to prevent accidents, which could lead to serious bodily injury or death.
This mark indicates instructions, which must be followed, or it
leads to mechanical failure, breakdown, or damage.
This mark indicates hints or directions useful in the use of the
product.
symbol concern critical points which must be taken
WARNING
IMPORTANT
NOTE
Contents
1. Parts location .................................................. 3
2. Specifications ................................................. 4
3. Warning labels on the machine ...................... 4
4. Symbols on the machine ................................ 4
5. For safe operation........................................... 5
6. Set up ............................................................. 8
7. Fuel ............................................................... 10
8. Operation ...................................................... 11
9. Maintenance ................................................. 14
10. Storage ......................................................... 16
11. Disposal........................................................ 16
12. Troubleshooting guide .................................. 17
G
B
1. Parts location
(1) Primer pump
(2) Air cleaner cover
(3) Choke lever
(4) Fuel tank
(5) Starter knob
(6) Spark arrester
(7) Blade
(8) Cutter case
(9) Blade guard
(10) Handle
(11) Drive shaft housing
(12) Sholder strap hanger
(13) Throttle lever
(14) Stop switch
(15) Throttle wire
(16) Throttle set button
GB-3
SGCZ2600DL/SGCZ2600DW
2. Specification
Model SGCZ2600DL SGCZ2600DW
Overall size (LxWxH) mm 1930 x 250 x 250 1930 x 610 x 415
Dry weight kg 6.7 6.9
Engine Type Air-cooled 2-stroke gasoline
Model Zenoah GZ25N
Max output rpm 1.2Hp (0.9kW) at 7500min
Idle speed rpm 3000± 200min
Displacement cm
Fuel
Carburetor Walbro Diaphragm type
Spark plug NGK CMR7A
Fuel tank capacity L 0.65
Transmission Centrifugal clutch, Rigid drive shaft
Reduction ratio 7.8
Specifications are subject to change without notice.
3
Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil)
25.4
-1
-1
3. Warning labels on the machine
(1) (2) (3) (4) (5) (6) (7)
(1) Read owner’s manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) Beware of thrown objects.
(6) Warning / Attention
(7) Keep all children, bystanders and helpers 15 meters away from the machine.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
4. Symbols on
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled brushcutter or if you don’t observe
the proper usage written in the manual.
Position: FUEL TANK CAP
15
m
(50ft)
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
GB-4
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER
5. For safe operation
SGCZ2600DL/SGCZ2600DW
1. Read this manual carefully until
you completely understand and
follow all safety and operating
instructions.
2. Keep this manual handy so that
you may refer to it later whenever any questions arise. Also
note, if you have any questions
which cannot be answered
herein, contact the dealer from
whom you purchased the product.
3. Always be sure to include this
manual when selling, lending, or
otherwise transferring the ownership of this product.
4. Never allow children or anyone
unable to fully understand the
directions given in the manual
to use the machine.
WORKING CONDITION
1. When using the product, you
should wear proper clothing and
protective equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face
protector
(4) Thick work gloves
(5) Non-slip-sole work boots
2. And you should carry with you.
(1) Attached tools
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working
area (rope, warning signs)
(5) Whistle (for collaboration or
emergency)
(6) Hatchet or saw (for removal of
obstacles)
3. Do not wear loose clothing, jewelry, short trousers, sandals, or go
barefoot. Do not wear anything
which might be caught by a moving part of the unit. Secure hair
so it is above shoulder length.
WORKING CIRCUMSTANCE
1. Never start the engine inside a
closed room or building. Exhaust
gases contain dangerous carbon
monoxide.
2. Never use the product,
a. when the ground is slippery
or when you can’t maintain a
steady posture.
b. At night, at times of heavy fog,
or at any other times when
your field of vision might be
limited and it would be difficult to gain a clear view of the
working area.
c. During rain storms, during
lightning storms, at times of
strong or gale-force winds, or
at any other times when
weather conditions might
make it unsafe to use the
product.
WORKING PLAN
1. You should never use the product when under the influence of
alcohol, when suffering from exhaustion or lack of sleep, when
suffering from drowsiness as a result of having taken cold medicine
or at any other time when a possibility exists that your judgment
might be impaired or that you
might not be able to operate the
product properly and in a safe
manner.
2. When planning your work schedule, allow plenty of time to rest.
Limit the amount of time over
which the product is to be used
continuously to somewhere
around 30 ~ 40 minutes per session, and take 10 ~ 20 minutes of
rest between work sessions. Also
try to keep the total amount of
work performed in a single day
under 2 hours or less.
WARNING
1. If you don’t observe the working
time, or working manner (See
“USING THE PRODUCT”), Repetitive Stress Injury (RSI) could
occur.
If you feel discomfort, redness and
swelling of your fingers or any
other part of your body, see a doctor before getting worse.
2. To avoid noise complaints, in general, operate product between
8 a.m. and 5 p.m. on weekdays
and 9 a.m. to 5 p.m. on weekends.
NOTE
Check and follow the local regulations as to sound level and hours of
operations for the product.
GB-5
G
B
SGCZ2600DL/SGCZ2600DW
5. For safe operation
BEFORE STARTING
THE ENGINE
1. The area within a perimeter of
15 m (50 ft) of the person using
the product should be considered
a hazardous area into which no
one should enter. If necessary,
yellow warning rope, warning
signs should be placed around
the perimeter of the area. When
work is to be performed simultaneously by two or more persons,
care should also be taken to constantly look around or otherwise
check for the presence and locations of other people working so
as to maintain a distance between
each person sufficient to ensure
safety.
2. Check the condition of working
area to avoid any accident by hitting hidden obstacles such as
stumps, stones, cans, or broken
glass.
IMPORTANT
Remove any obstacle before beginning work.
ensure that neither the cutting
part nor the throttle come into
contact with any obstacle when
the engine starts.
WARNING
Never place the throttle into the
high-speed position when starting
the engine.
3. After starting the engine, check
to make sure that the cutting attachment stops rotating when the
throttle is moved fully back to its
original position. If it continues to
rotate even after the throttle has
been moved fully back, turn off
the engine and take the unit to
your authorized ZENOAH servicing dealer for repair.
USING THE PRODUCT
IMPORTANT
Cut only materials recommended by
the manufacturer. And use only for
tasks explained in the manual.
GB-6
3. Inspect the entire unit for loose
fasteners and fuel leakage. Make
sure that the cutting attachment
is properly installed and securely
fastened.
4. Be sure the debris guard is firmly
attached in place.
5. Always use the shoulder strap.
Adjust the strap for comfort before starting the engine. The strap
should be adjusted so the left
hand can comfortably hold the
handlebar grip approximately
waist high.
STARTING THE ENGINE
1. Keep bystanders and animals at
least 15 m (50 ft) away from the
operating point. If you are approached, immediately stop the
engine.
2. The product is equipped with a
centrifugal clutch mechanism, so
the cutting attachment begins to
rotate as soon as the engine is
started by putting the throttle into
the start position. When starting
the engine, place the product
onto the ground in a flat clear area
and hold it firmly in place so as to
1. Grip the handles firmly with both
hands using your whole hand.
Place your feet slightly apart
(slightly further apart than the
width of your shoulders) so that
your weight is distributed evenly
across both legs, and always be
sure to maintain a steady, even
posture while working.
2. Keep cutting attachment below
waist level.
3. Maintain the speed of the engine
at the level required to perform
cutting work, and never raise the
speed of the engine above the
level necessary.
4. If the unit starts to shake or vibrate, turn off the engine and
check the whole unit. Do not use
it until the trouble has been properly corrected.
5. Keep all parts of your body away
from rotating cutting attachment
and hot surfaces.
6. Never touch the muffler, spark
plug, or other metallic parts of the
engine while the engine is in operation or immediately after shutting down the engine. Doing so
Loading...