Zenoah BCZ5010DL User Manual
BCZ4505DW / BCZ4505CL / BCZ5010DL / BCZ5010DW / BCZ5010CL
115333110 (001)
OWNER’S MANUAL
BRUSHCUTTERS
G
G
B
B
BCZ4505DW
BCZ4505CL
BCZ5010DL
BCZ5010DW
BCZ5010CL
Original Language
GB-1
BCZ4505DW / BCZ4505CL / BCZ5010DL / BCZ5010DW / BCZ5010CL
EC DECLARATION OF CONFORMITY
(Applies to Europe only)
The undersigned manufacturer,
Husqvarna Zenoah Co.,Ltd.,
1-9, Minamidai, Kawagoe, Saitama, Japan,
declares under sole responsibility that the following products referred to in this
declaration conform with the requirement of the following COUNCIL’S DIRECTIVE.
The products referred to are :
DESIGNATION : Brushcutter
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
MODELS : BCZ4505DW BCZ4505CL
SERIAL NUMBERS DATING : 2010 and onwards
This declaration conform with :
・DIRECTIVE 2006/42/EC
(The following standards have been applied: ISO 12100-1,-2, FprEN 15503: 2009)
・DIRECTIVE 2004/108/EC
(The following standards have been applied: EN 61000-6-1, EN 55012 (CISPR 12: 2005))
・DIRECTIVE 2000/14/EC
conformity assessment procedure followed ANNEX V
(The following standards have been applied: ISO 11094)
・DIRECTIVE 2002/88/EC
・ENISO 11806
BCZ5010DL BCZ5010DW
BCZ5010CL
(The year is cleary stated on the rating plate,
follwed by the serial number)
Date :
Signature :
Kiyoshi Honda
General Manager, Development Center
Authorised representative :
Person authorised to compile the technical file :
29 December 2009
Husqvarna AB
SE-561 82 Huskvarna, Sweden
Bo R Jonsson
SE-561 82 Huskvarna, Sweden
GB-2
BCZ4505DW / BCZ4505CL / BCZ5010DL / BCZ5010DW / BCZ5010CL
EXPLANATION OF SYMBOLS AND SAFETY WARNINGS
WARNING!!!
RISK OF DAMAGING HEARING
Wear head, eye and ear protection.
G
B
MODEL
SOUND LEVEL
ISO 22868
L
pAeq
BCZ4505DW Blade 45.2 cm
BCZ4505DW Trimmer head 45.2 cm
BCZ4505CL Blade 45.2 cm
BCZ4505CL Trimmer head 45.2 cm
BCZ5010DL Blade 50.6 cm
BCZ5010DL Trimmer head 50.6 cm
BCZ5010DW Blade 50.6 cm
BCZ5010DW Trimmer head 50.6 cm
BCZ5010CL Blade 50.6 cm
BCZ5010CL Trimmer head 50.6 cm
* Specifications are subject to change without notice
1) Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.
Reported soundpower level for the machine has been measured with the original cutting attachment that gives the highest level.
The difference between guaranteed and measured sound power is that the guaranteed sound power also includes dispersion in the
measurement result and the variations between different machines of the same model according to Directive 2000/14/EC.
Reported data for equivalent sound pressure level (L
(standard deviation) of 1 dB (A).
2) Reported data for equivalent vibration level (a
3
100 dB(A) 118 dB(A) 4.5 m/s
3
3
3
3
3
3
3
3
3
hv,eq) at the control handle has a typical statistical dispersion (standard deviation) of 1 m/s
98 dB(A) 118 dB(A) 4.5 m/s
100 dB(A) 118 dB(A) 3.1 m/s
102 dB(A) 118 dB(A) 3.1 m/s
101 dB(A) 118 dB(A) 7.3 m/s
100 dB(A) 118 dB(A) 7.3 m/s
101 dB(A) 118 dB(A) 5.0 m/s
99 dB(A) 118 dB(A) 5.1 m/s
100 dB(A) 118 dB(A) 3.1 m/s
103 dB(A) 118 dB(A) 3.3 m/s
pAeq) at the operator’s ear for the machine has a typical statistical dispersion
1)
LwA(guaranteed)
VIBRATION LEVEL
ISO 22867
a
hv,eq
2
2
2
2
2
2
2
2
2
2
APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION
DIRECTIVE 97/68/EC AMENDED 2002/88/EC
BCZ4505 : e13*97/68SH2G3*2002/88*0097*04
BCZ5010 : e13*97/68SH3G3*2002/88*0622*02
2)
2
.
GB-3
BCZ4505DW / BCZ4505CL / BCZ5010DL / BCZ5010DW / BCZ5010CL
SAFETY FIRST
Instructions contained in warnings within this manual marked
with a
into consideration to prevent possible serious bodily injury, and
for this reason you are requested to read all such instructions
carefully and follow them without fail.
WARNINGS IN THE MANUAL
This mark indicates instructions, which must be followed in order to prevent accidents, which could lead to serious bodily injury or death.
This mark indicates instructions, which must be followed, or it
leads to mechanical failure, breakdown, or damage.
This mark indicates hints or directions useful in the use of the
product.
symbol concern critical points which must be taken
WARNING
IMPORTANT
NOTE
Contents
1. Parts location .................................................. 4
2. Specifications ................................................. 5
3. Warning labels on the machine ...................... 5
4. Symbols on the machine ................................ 5
5. For safe operation ........................................... 6
6. Set up ............................................................. 9
7. Fuel ............................................................... 11
8. Operation ...................................................... 12
9. Maintenance ................................................. 16
10. Storage ......................................................... 18
11. Troubleshooting guide .................................. 19
12. Disposal ........................................................ 19
1. Parts location
(1) Primer
(2) Air cleaner cover
(3) Choke lever
(4) Fuel tank
(5) Starter knob
(6) Blade
(7) Angle transmission
(8) Cutting Attachment guard
(9) Loop handle
(10) Shaft tube
(11) Suspention point
(12) Throttle trigger
(13) Stop switch
(14) Throttle cable
(15) Handle
(16) Trimmer head
7
16
DL TYPE
with trimmer
head
11
8
10
13
DW TYPE
15
14
7
5
3
4
1
6
5
3
1
14
12
9
7
6
2
4
12
8
with blade
13
11
10
2
12
CL TYPE
with blade
13
8
10
11
15
5
3
2
4
1
GB-4
BCZ4505DW / BCZ4505CL / BCZ5010DL / BCZ5010DW / BCZ5010CL
2. Specification
Model BCZ4505DW BCZ5010DL/DW BCZ4505/5010CL
Overall size (LxWxH) mm DL: 1915x420x260 DW: 1915x655x450 1915x655x530
Dry weight kg 8.5 9.0
Engine Model Zenoah GZ45N Zenoah GZ50N Zenoah GZ45N/GZ50N
Displacement cm
Fuel Mixture (Gasoline 50 : Oil 1)(when using ZENOAH genuine oil)
Carburetor Diaphragm type
Ignition system Flywheel magneto (C.D.I.)
Spark plug NGK CMR7H
Fuel tank capacity L 0.8
Starter Recoil starter
Clutch Centrifugal type
Reduction ratio 1.4
Cutting head rotating direction Counter-clockwise (Operator view)
Specifications are subject to change without notice.
3
45.2 50.6 45.2/50.6
3. Warning labels on the machine
G
B
(1) (2) (3) (4) (5) (6) (7)
(1) Read owner’s manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) Beware of thrown objects.
(6) Warning / Attention
(7) Keep all children, bystanders and helpers 15 meters away from the machine.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
4. Symbols on
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled brushcutter or if you don’t observe
the proper usage written in the manual.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The direction to close the choke
Position: ENGINE COVER
15
m
(50ft)
The direction to open the choke
Position: ENGINE COVER
GB-5
BCZ4505DW / BCZ4505CL / BCZ5010DL / BCZ5010DW / BCZ5010CL
5. For safe operation
GB-6
1. Read this manual carefully until
you completely understand and
follow all safety and operating
instructions.
2. Keep this manual handy so that
you may refer to it later whenever any questions arise. Also
note, if you have any questions
which cannot be answered
herein, contact the dealer from
whom you purchased the product.
3. Always be sure to include this
manual when selling, lending, or
otherwise transferring the ownership of this product.
4. Never allow children or anyone
unable to fully understand the
directions given in the manual
to use the machine.
WORKING CONDITION
1. When using the product, you
should wear proper clothing and
protective equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face
protector
(4) Thick work gloves
(5) Non-slip-sole work boots
2. And you should carry with you.
(1) Attached tools
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working
area (rope, warning signs)
(5) Whistle (for collaboration or
emergency)
(6) Hatchet or saw (for removal of
obstacles)
3. Do not wear loose clothing, jewelry, short trousers, sandals, or go
barefoot. Do not wear anything
which might be caught by a moving part of the unit. Secure hair
so it is above shoulder length.
WORKING CIRCUMSTANCE
1. Never start the engine inside a
closed room or building. Exhaust
gases contain dangerous carbon
monoxide.
2. Never use the product,
a. when the ground is slippery
or when you can’t maintain a
steady posture.
b. At night, at times of heavy fog,
or at any other times when
your field of vision might be
limited and it would be difficult to gain a clear view of the
working area.
c. During rain storms, during
lightning storms, at times of
strong or gale-force winds, or
at any other times when
weather conditions might
make it unsafe to use the
product.
WORKING PLAN
1.
You should never use the product
when under the influence of alcohol,
when suffering from exhaustion or
lack of sleep, when suffering from
drowsiness as a result of having taken
cold medicine or at any other time
when a possibility exists that your
judgment might be impaired or that
you might not be able to operate the
product properly and in a safe manner.
2. When planning your work schedule, allow plenty of time to rest.
Limit the amount of time over
which the product is to be used
continuously to somewhere
around 30 ~ 40 minutes per session, and take 10 ~ 20 minutes of
rest between work sessions. Also
try to keep the total amount of
work performed in a single day
under 2 hours or less.
WARNING
1. If you don’t observe the working
time, or working manner (See
“USING THE PRODUCT”), Repetitive Stress Injury (RSI) could
occur.
If you feel discomfort, redness and
swelling of your fingers or any
other part of your body, see a doctor before getting worse.
2. To avoid noise complaints, in general, operate product between
8 a.m. and 5 p.m. on weekdays
and 9 a.m. to 5 p.m. on weekends.
NOTE
Check and follow the local regulations as to sound level and hours of
operations for the product.
Loading...