Zenoah BC2201DL User Manual

T3146-93120(202)

BC2201DL

BRUSHCUTTERS

February 2002

APPLICABLE SERIAL NUMBERS:

200101 and up

NOTE :

1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement.

2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any
parts other than those specified by the company.

3. When placing parts orders for repair and/or replacement, check if the model name and the serial
number are applicable to those specified in the parts list, then use parts number described in the
parts list.

4. The contents described in the parts list are accurate as of the date and may change due to
improvement.

5. The parts for the machine shall be supplied ten (10) years after the machine is discontinued. [It is
possible that some specific parts may be subject to change of their delivery term and list price
within the limit of ten (10) years after the machine is discontinued. It is also possible that some
parts may be available even after the limit of ten (10) years.]

Fig.1 CUTTER GROUP

BC2201DL

1 T3146-11300 PIPE COMP

1500x24xT1.5

1
2 3520-12213 SHAFT, spline ø7x7teeth 1 1536x7
3 T3109-13000 GEARCASE ASSY 1
4 6489-13110 • GEARCASE 1
5 06000-00626 • BEARING 1
6 06000-06000 • BEARING 1
7 3565-13130 • SEAL 1
8 04065-02612 • RING 1
9 6440-13211 • SHAFT 1

10 6440-13220 • GEAR 1
11 6423-13241 • HOLDER(A) 1
12 6423-13250 • HOLDER(B) 1
13 3560-13290 • WASHER 1
14 3560-13261 • BOLT 1

M7x25(L)
15 T3002-13310 • PINION 1
16 06000-00609 • BEARING 1
17 06001-00609 • BEARING 1
18 T3300-13330 • RING 1
19 04065-02412 • RING 1
20 01252-30510 • BOLT 1
21 3350-21320 • BOLT 1 M5x30
22 0224-40610 • BOLT 1
23 6130-18000 HANGER ASSY 1
24 6130-18101 • HANGER 1
25 6130-18200 • CLUMP 1
26 0263-90520 • SCREW 1

29 T3146-12510 PLATE NAME 1
30 6425-12552 PLATE CAUTION 1
31 T3146-12590 No.PLATE 1
32 6489-24000 GUARD ASSY 1
33 6489-24110 • GUARD 1
34 6489-24200 • PLATE COMP 1
35 6489-24210 • • PLATE 1
36 6489-24220 • • BLADE 1
37 0277-10412 • • SCREW 1
38 6489-24120 • PLATE 1
39 01252-30516 • BOLT 4
40 01601-20513 • WASHER 4
41 3560-13284 COVER(BOLT) 1
42 6251-15910 COVER(BLADE) 1
43 T3300-17100 STRAP ASSY 1
44 6298-E3390 SAW 1
45 5883-32160 SCREW 1
46 T3110-14000 HANDLE ASSY 1
47 T3110-14110 • HANDLE 1
48 0263-90530 • SCREW 4
49 T3110-18000 GRIP ASSY 1
50 K2300-000240 • GRIP (R) 1
51 K2300-000230 • GRIP (L) 1
52 K3200-000370 • CLAMP (A) 1
53 K3300-000010 • PLATE (A) 1
54 K3300-000020 • PLATE (B) 1
55 K5100-000240 • COLLAR 1
56 K5100-000220 • SPRING 1
57 K2300-000260 • SAFETY LEVER 1
58 K2300-000250 • THROTTLE LEVER 1
59 K3200-000380 • CLAMP (B) 1
60 K5100-000230 • SPRING 1
61 K5100-000210 • SPRING 1
62 K2300-000270 • PLATE 1
63 B1122-C2910H • SCREW 1
64 K2300-000280 • SWITCH 1

Key# PART NUMBER DESCRIPTION

Q'TY
/UNIT

NOTE

65 K5200-000090 • CORD 1
66 K5100-000270 • CABLE COMP 1
67 K5100-000201 • • THROTTLE CABLE 1
68 K5200-000130 • • SLEEVE 1
69 K2300-000390 • LID 1
70 B1176-090530 • SCREW 4
71

B1181-04054506

• NUT 4
72 T3109-83100 CABLE COMP. 1
73 T3109-83310 TUBE 1
74 T3146-93110 MANUAL 1

Key# PART NUMBER DESCRIPTION

Q'TY
/UNIT

NOTE

Fig.1 CUTTER GROUP

BC2201DL