Zenoah BC2002, TR2001 User Manual
OWNER’S MANUAL
848J6093A0 (311)
BRUSHCUTTERS
G
G
B
B
BC2002
TR2001
GB-1
EXPLANATION OF SYMBOLS AND SAFETY WARNINGS
WARNING!!!
RISK OF DAMAGING HEARING
MAY INVOLVE A DAILY LEVEL OF PERSONAL EXPOSURE TO NOISE
IN NORMAL CONDITIONS OF USE, THIS MACHINE
FOR THE OPERATOR EQUAL TO OR GREATER THAN
85 dB(A)
MODEL
21.7 cm
3
106.47 dB(A)
measured
SOUND LEVEL VIBRATION LEVEL
ISO 10884
LwA
guaranteed
108 dB(A)
idling
2.7 m/s
ISO 7916
racing
2
3.9 m/s
2
GB-2
G
B
SAFETY FIRST
Instructions contained in warnings within this manual marked
with a symbol concern critical points which must be taken
into consideration to prevent possible serious bodily injury, and
for this reason you are requested to read all such instructions
carefully and follow them without fail.
WARNINGS IN THE MANUAL
WARNING
This mark indicates instructions, which must be followed in order to prevent accidents, which could lead to serious bodily injury or death.
IMPORTANT
This mark indicates instructions, which must be followed, or it
leads to mechanical failure, breakdown, or damage.
NOTE
This mark indicates hints or directions useful in the use of the
product.
Contents
1. Parts location .................................................. 4
2. Specifications ................................................. 4
3. Warning labels on the machine ...................... 5
4. Symbols on the machine ................................ 5
5. For safe operation........................................... 6
6. Set up ............................................................. 9
7. Fuel ............................................................... 10
8. Operation...................................................... 11
9. Maintenance ................................................. 13
10. Storage ......................................................... 15
11. Troubleshooting guide .................................. 16
GB-3
1. Parts location
1
2
3
4
5
6
7
8
9
10
11
12
13
14
[BC2002]
[TR2001]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
(1) Primer pump
(2) Air cleaner cover
(3) Choke lever
(4) Fuel tank
(5) Starter knob
(6) Line head
(7) Gear case
(8) Debris guard
(9) Loop handle
(10) Drive shaft housing
(11) Sholder strap hanger
(12) Throttle lever
(13) Ignition switch
(14) Throttle cable
2. Specification
Overall size (L W H) ............................ 1795 x 230 x 303 / 1795 x 340 x 303 mm
Dry weight .................................................................................................. 4.1 / 4.7 kg
Engine
Type............................................................................ Air-cooled 2-stroke gasoline
Model ............................................................................................. Zenoah G20LS
Displacement ........................................................................................... 21.7 cm
Fuel............................................................................ Mixture (Gasoline 50 : Oil 1)
Carburetor .................................................................................... Diaphragm type
Ignition system ................................................................................................C.D.I
Spark plug........................................................................................NGK BPMR7A
Fuel tank capacity................................................................................................. 0.5 L
Starter ...................................................................................................... Recoil starter
Clutch.................................................................................................. Centrifugal type
Reduction ratio.................................................................................................... 1.462
Cutting head rotating direction ............................. Counter-clockwise (Operator view)
Specifications are subject to change without notice.
3
GB-4
3. Warning labels on the machine
If warning label peels off or becomes soiled and
Read owner’ s manual bef ore operating this machine.
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
G
B
Wear head, eye and ear protection.
Warning / Attention
Keep all children, bystanders and helpers 15
meters away from the machine.
4. Symbols on the machine
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled brushcutter or if you don’t observe
the proper usage written in the manual.
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
GB-5
Loading...