Zenith XBV 443 User Manual

Download

Page 1

Installation and Operating Guide | Warranty

Model Number | XBV443 | DVD Player + Video Cassette Recorder

Page 2

Safety Precautions

This lightning flash with arrowhead symbol within an

equilateral triangle is intended to alert the user to

the presence of uninsulated dangerous voltage

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

WARNING: Do not install this equipment in a confined space

such as a bookcase or similar unit.

NOTE TO CABLE/TV INSTALLER: This reminder is provided to

call the cable TV system installer’s attention to Article 820-40 of

the National Electric Code (U.S.A.). The code provides guidelines

for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the

building, as close to the point of the cable entry as practical.

CAUTION:

This DVD+VCR employs a Laser System.

To ensure proper use of this product, please read this owner’s

manual carefully and retain for future reference. Should the

unit require maintenance, contact an authorized service loca-

tion.

Use of controls, adjustments, or the performance of proce-

dures other than those specified herein may result in haz-

ardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open

the enclosure. Visible laser radiation when open. DO NOT

STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water

(dripping or splashing) and no objects filled with liquids, such

as vases, should be placed on the apparatus.

FCC WARNING: This equipment may generate or use radio

frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the modifi-

cations are expressly approved in the instruction manual. The

user could lose the authority to operate this equipment if an

unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This product has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the product is

operated in a residential installation. This product generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this product does cause harmful

interference to radio or television reception, which can be

determined by turning the product off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the product and

receiver.

 Connect the product into an outlet on a circuit different

from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician

for help.

FCC COMPLIANCE: The responsible party for this product’s

compliance is:

Marketed and Distributed by LG Electronics U.S.A., Inc.

1000 Sylvan Avenue, Englewood Cliffs, NJ.

Phone: 1-201-816-2125.

NOTES ON COPYRIGHTS:

It is forbidden by law to copy, broadcast, show, broadcast

via cable, play in public, or rent copyrighted material without

permission.

This product uses copyright protection developed by

Macrovision. Copy protection signals are recorded on some

discs. When recording and playing the pictures of these discs

on a VCR, picture noise will appear.

This product incorporates copyright protection technology that

is protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation

and other rights owners. Use of this copyright protection tech-

nology must be authorized by Macrovision Corporation, and is

intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

SERIAL NUMBER: The serial number is found on the back of

this unit. This number is unique to this unit and not available to

others. You should record requested information here and

retain this guide as a permanent record of your purchase.

Model No. ____________XBV443______________

Serial No. _________________________________

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET

POUSSER JUSQU’AU FOND.

WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-

TRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO

RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Page 3

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions. - All these safety and oper-

ating instructions should be read before the product is

operated.

2. Keep these instructions. - The safety, operating and

use instructions should be retained for future refer-

ence.

3. Heed all warnings. - All warnings on the product and

in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use

instructions should be followed.

5. Do not use this product near water. – For example:

near a bath tub, wash bowl, kitchen sink, laundry tub,

in a wet basement; or near a swimming pool; and

other areas located near water.

6. Clean only with dry cloth. – Unplug this product from

the wall outlet before cleaning. Do not use liquid

cleaners.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over- heating. The open-

ings should never be blocked by placing the product

on a bed, sofa, rug or other similar surface. This prod-

uct should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is pro-

vided or the manufacturer’s instructions have been

adhered to.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. D

o not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/product combination to avoid injury from tip-over.

13. Unplug this product during lightning storms or when unused for long periods of time.

14.

Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION:

PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in electric

shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-

dures for installation, use, and servicing.

This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

Page 4

Table of Contents

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Selecting the Viewing Source . . . . . . . . . . . . . . . . 6

Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 7

Display Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connections Panel . . . . . . . . . . . . . . . . . . . . . . . . 10

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13

Connecting Antenna/Cable TV to DVD+VCR . . . 11

Basic TV Connections . . . . . . . . . . . . . . . . . . . . 12

Optional, Preferred TV Connections . . . . . . . 12-13

VCR Operation Setup . . . . . . . . . . . . . . . . . . . . 14-16

On-Screen Display (OSD) . . . . . . . . . . . . . . . . . 14

On-Screen Menus Setup . . . . . . . . . . . . . . . . . . 14

VCR Setup Menu Options . . . . . . . . . . . . . . . . . 15

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . 15

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . 16

DVD Operation Setup . . . . . . . . . . . . . . . . . . . . 17-20

General Explanation. . . . . . . . . . . . . . . . . . . . . . 17

On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . 17

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . 18-20



General Operation . . . . . . . . . . . . . . . . . . . . 18



Language . . . . . . . . . . . . . . . . . . . . . . . . . . 18



Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18



Progressive Scan. . . . . . . . . . . . . . . . . . . . . 18



Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19



Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19



Parental Control. . . . . . . . . . . . . . . . . . . . . . 20

Operation

VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . 21-26

Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . 21

Special Effect Playbacks . . . . . . . . . . . . . . . . . . 21



Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21



Still Picture and Frame-by-Frame Playback . 21



Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . 21



CM Skip (Commercial Skip) . . . . . . . . . . . . . 21

Normal Recording . . . . . . . . . . . . . . . . . . . . . . . 22

Timer Recording . . . . . . . . . . . . . . . . . . . . . . 22-23

Instant Timer Recording . . . . . . . . . . . . . . . . . . . 24

Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . 24

Copying from DVD to VCR . . . . . . . . . . . . . . . . . 24

VHS Hi-Fi Stereo System/MTS Broadcast . . . . . 25

Tape Counter Memory Feature . . . . . . . . . . . . . . 26

Additional Information . . . . . . . . . . . . . . . . . . . . 26

DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . 27-29

Playing DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . 27

General Features . . . . . . . . . . . . . . . . . . . . . 27-29



Moving to another TITLEs . . . . . . . . . . . . . . 27



Moving to another CHAPTERs . . . . . . . . . . . 27



Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . 27



Still Picture and Frame-by-Frame Playback . 28



Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28



Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28



Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28



Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 28



Time Search . . . . . . . . . . . . . . . . . . . . . . . . 28



3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 28



Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28



Marker Search . . . . . . . . . . . . . . . . . . . . . . . 29



Changing Video Mode . . . . . . . . . . . . . . . . . 29

Special DVD Features . . . . . . . . . . . . . . . . . . . . 29



Checking the contents of DVD Video discs:

Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29



Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 29



Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 29



Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 29



Changing the Audio Language . . . . . . . . . . . 29



Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Audio CD and MP3/WMA Disc Operation . . . . 30-31

Playing Audio CDs and MP3/WMA Discs . . . . . . 30

MP3/WMA Recording Notes . . . . . . . . . . . . . . . . 30



Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31



Selecting other Tracks . . . . . . . . . . . . . . . . . 31



Repeat Track/ All/ Off . . . . . . . . . . . . . . . . . . 31



Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31



Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 31



Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 31



3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 31



Changing the Audio Channel . . . . . . . . . . . . 31

JPEG File Operation . . . . . . . . . . . . . . . . . . . . . . . 32

Viewing JPEG Files on a Disc . . . . . . . . . . . . . . 32



Selecting other JPEG Files . . . . . . . . . . . . . 32



Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 32



To flip the picture . . . . . . . . . . . . . . . . . . . . . 32



To rotate picture. . . . . . . . . . . . . . . . . . . . . . 32



Notes on JPEG Files . . . . . . . . . . . . . . . . . . 32

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 33

Programmed Playback with Audio CDs and

MP3/WMA Discs . . . . . . . . . . . . . . . . . . . . . . . . 33



Repeat Programmed Tracks . . . . . . . . . . . . 33



Erasing a Track from Program List. . . . . . . . 33



Erasing the Complete Program List . . . . . . . 33

Reference

Controlling Your TV with the Supplied Remote . . 34

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 35-36

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 37

Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 38

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features on this unit.

Indicates tips and hints for making the task easier.

Page 5

INTRODUCTION

Before Use

Playable Discs

DVD

(8 cm/12 cm disc)

Audio CD

(8 cm/12 cm disc)

In addition, this unit can play, Kodak Picture CDs

DVD+R/RW, DVD-R/RW and CD-Rs or CD-RWs that

contain audio titles, MP3, JPEG or WMA files.

otes

 Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD±R/RW) disc

itself, some CD-R/RW (or DVD±R/RW) discs cannot

be played on the unit.

 The unit cannot play discs that contain data other

than MP3 and CD-DA data.

 Do not attach any seal or label to either side

(the labeled side or the recorded side) of a disc.

 Do not use irregularly shaped CDs

(e.g., heart-shaped or octagonal). The unit may

malfunction.

otes on DVDs

Some playback operations of DVDs may be intentionally

fixed by software manufacturers. As this unit plays

DVDs according to disc content designed by the software

manufacturer, some playback features of the unit may

not be available or other functions may be added.

Refer also to the instructions supplied with the DVDs.

Some DVDs made for business purposes may not be

played on the unit.

Regional code of this DVD+VCR and DVDs

This DVD+VCR is designed and manufac-

tured for playback of Region 1 encoded

DVD software. The region code on the labels of some

DVD discs indicate which type of DVD+VCR can play

those discs. This unit can play only DVD discs labeled 1

or ALL. If you try to play any other discs, the message

“Check Regional Code” will appear on the TV screen.

Some DVD discs may not have a region code label even

though their playback is prohibited by area limits.

ote on DTS-encoded CDs

When playing DTS-encoded CDs, excessive noise may

be heard from the analog stereo output. To avoid

possible damage to the audio system, turn down the

volume before playing back such discs, adjust the

volume gradually, and keep the volume level low. To

enjoy DTS Digital Surround

playback, an external 5.1

channel Digital SurroundTMdecoder system must be

connected to the digital output of the unit.

Disc-Related Terms

Title (DVD only)

The main film content or accompanying feature content

or music album.

Each title is assigned a title reference number enabling

you to locate it easily.

Chapter (DVD only)

Sections of a picture or a musical piece that are smaller

than titles. A title is composed of one or several chap-

ters. Each chapter is assigned a chapter number to

enable you to locate the chapter you want. Depending

on the disc, the DVD may not be divided into chapters.

Track (Audio CD only)

Sections of a musical piece on an audio CD. Each track

is assigned a track number, enabling you to locate the

track you want.

Remote Control Battery Installation

Detach the battery cover on the rear of the

remote control, and insert two AAA batter-

ies with and aligned correctly.

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Remote Control Operating Range

Point the remote control at the remote sensor and press

the buttons.



Distance: About 23 ft (7 m) from the front of the

remote sensor



Angle: About 30° in each direction of the front of the

remote sensor

IMPORTANT NOTE:

SPENT OR DISCHARGED BATTERIES MUST BE

RECYCLED OR DISPOSED OF IN A SAFE MANNER

IN COMPLIANCE WITH ALL APPLICABLE LAWS.

FOR DETAILED INFORMATION, CONTACT YOUR

LOCAL COUNTY SOLID WASTE AUTHORITY.

Manufactured under license from Dolby Laboratories. “Dolby”,

“Pro Logic” and the double-D symbol are trademarks of Dolby

Laboratories.

DTS and DTS Digital Out are trademarks of Digital Theater

Systems, Inc.

Page 6

Before Use (Continued)

Precautions

Handling the unit

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packaged at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. In this case, position

the unit away from the TV, VCR, or radio, or turn off the

unit after removing the disc.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

Cleaning the unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

To obtain a clear picture

The DVD+VCR is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

For details, please contact your nearest dealer.

Notes on Discs

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

Do not stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

Cleaning discs

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

About Symbols

About the symbol display

“ ” may appear on the TV screen during operation.

This icon means the function explained in this owner’s

manual is not available on that specific DVD video disc.

About the disc symbols for instructions

Asection whose title has one of the following symbols are

applicable only to those discs represented by the symbol.

DVD

Audio CDs.

MP3 Discs.

WMA Discs.

JPEG Files.

JPEG

WMA

MP3

DVD

YES NO

Selecting the Viewing Source

You must select one of your output sources (DVD or

VCR) to view on the TV screen.

• If you want to view DVD deck output source:

Press DVD on the remote or DVD/VCR on the front panel

until DVD indicator in the display window lights and output

source of DVD deck is viewed on the TV screen.

• If you want to view VCR deck output source:

Press VCR on the remote or DVD/VCR on the front panel

until VCR indicator in the display window lights and output

source of VCR deck is viewed on the TV screen.

otes

 If you insert a disc while the DVD+VCR is in the VCR

mode, the DVD+VCR will switch to DVD mode

automatically.

 If you insert a cassette tape without an erasure

prevention tab while the DVD+VCR is in the DVD

mode, the DVD+VCR will switch to VCR mode auto-

matically.

Page 7

INTRODUCTION

Front Panel Controls

OPEN/CLOSE (ZZ)

Opens or closes the disc tray.

Remote Sensor

Point the DVD+VCR remote control here.

Disc Tray (DVD deck)

Insert a disc here.

POWER

Switches the DVD+VCR ON and OFF.

DVD/VCR (output select)

Select the DVD or VCR output source

to view on the TV screen.

LINE 2 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external source

(Audio system, TV/Monitor, another VCR).

Cassette Compartment

(VCR deck)

Insert a video cassette here.

B (PLAY)

To play back a recorded tape or disc.

RR/TT

(Forward SKIP/SCAN) DVD: Go to NEXT chapter/track. Press and hold for a fast forward search. VCR: Advances the tape while in STOP mode or for fast forward picture search.

SS/QQ

(Reverse SKIP/SCAN )

DVD: Go to beginning of current chapter/track or to previous chapter/track.

Press and hold for a fast reverse search.

VCR: Rewinds the tape while in STOP mode or for fast reverse picture search.

COPY

Press to copy a DVD in the DVD deck to a

VHS tape in the VCR deck.

EJECT(ZZ)

Ejects the tape in the VCR deck.

Display window

Shows the current status of the DVD+VCR.

XX/CC

(PAUSE/STEP)

Pause playback of a tape or a disc in the DVD or VCR deck

temporarily/press repeatedly for frame-by-frame playback.

(STOP)

Stops playback of a disc or tape.

REC/ITR (zz)

To record normally or to activate

Instant Timer Recording.

CH (vv/VV)

To scan up or down through memorized channels.

Page 8

Display Window

DVD+VCR is in timer recording or a timer

recording is programmed.(VCR part only)

A cassette is in the VCR deck.

The VCR deck is selected.

DVD+VCR is Recording.

(VCR part only)

Indicates PM time. (AM is not displayed.)

Lights when TV mode is active (See page 22.)

A disc is in the DVD deck.

(Lights when a disc is in the DVD deck

and Flashes when no disc.)

Indicates when the Progressive scan is active.

Indicates when the DVD+VCR is locked.

Indicates total playing time, elapsed time, remaining time or

current deck status (Playback, Pause, etc).

The DVD deck is selected.

Indicates repeat mode.

DVD

[P]

VCR REC

Page 9

INTRODUCTION

Remote Control

POWER

Turns DVD+VCR ON and OFF.

DVD

Select the DVD+VCR function mode to

DVD.

VCR

Select the DVD+VCR function mode to

VCR.

INPUT

Selects the VCR deck’s source

(Tuner, LINE 1, or LINE 2).

0-9 numerical buttons

Selects numbered options in a menu.

Selects TV’s channel.

TV/VCR

To view channels selected by the VCR

tuner or by the TV tuner.

DISPLAY, CLK/CNT

Accesses On-Screen Display.

Switches between the clock, tape count-

er and tape remaining modes on the dis-

play.

SETUP, MENU

Accesses or removes DVD Setup menu

and VCR menu.

bBvV(left/right/up/down)

Selects menu options.

CH/TRK(

v+/V-) :

Selects VCR channels.

Adjusts manually the tape’s picture

onscreen.

ENTER

Confirms menu selections.

DISC MENU

Accesses menu on a DVD disc.

RETURN (O)

Removes the menu.

AUDIO

Selects an audio language (DVD) or an

audio channel (CD).

SUBTITLE

Selects a subtitle language.

ANGLE

Selects a DVD camera angle,

if available.

ZOOM

Enlarges DVD video image.

EJECT, OPEN/CLOSE

- Opens and closes the disc tray.

- Ejects the tape in the VCR deck.

TV Control Buttons

- POWER: Switches TV ON and OFF.

- INPUT: Selects the TV’s source.

- CH +/–: Selects TV’s channel.

- VOL +/–: Adjusts TV’s volume.

- MUTE: Turns on or off TV sound.

BACKWARD / FORWARD (m/M)

DVD: Search backward or forward.

- VCR: Rewinds/Advances the tape

during the STOP mode, for fast

reverse/forward picture search.

SKIP (. / >)

Go to next chapter or track. Returns to

beginning of current chapter or track or

go to previous chapter or track.

PAUSE/STEP (X)

Pause playback or recording temporari-

ly, press again to exit pause mode.

press repeatedly for frame-by-frame

playback.

N (PLAY)

Starts playback.

STOP (x)

Stops playback or recording.

REC/ITR (z)

Starts recording. Press repeatedly to set

the recording time.

LOCK

Locks/unlocks front panel buttons.

TITLE

Displays the disc’s Title menu, if

available.

PROGRAM

Accesses or removes Program menu.

MARKER

Marks any point during playback.

Displays Marker Search menu.

CLEAR

Removes a mark on the Marker Search

menu.

REPEAT

Repeat chapter, track, title or all.

A-B/SPEED

Repeats sequence between two points

(A and B).

- Selects recording speed.

RANDOM/CM SKIP

- Plays tracks in random order.

- Fast forwards picture search through

30 seconds of recording.

LOCK

The Lock feature disables the front panel buttons to prevent children from tam-

pering with the DVD+VCR. Simply press LOCK on the remote control to toggle

this feature on and off.

Page 10

Connections Panel

VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external source (Audio system,

TV/Monitor, Another VCR).

ANT.IN (ANTENNA INPUT)

Connect the VHF/UHF/CATV antenna to this terminal.

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))

Connect to a TV with video and audio inputs.

AUDIO OUT (Left/Right) (DVD OUT)

Connect to a TV, amplifier, receiver, or stereo system.

AC Power Cord

Plug into the power source

(AC 120V, 60 Hz).

S-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV.

COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT)

Connect to a TV with Y Pb Pr inputs.

RF. OUT (DVD/VCR OUT)

Connect to a TV with RF coaxial inputs.

DIGITAL AUDIO OUT (COAXIAL) (DVD OUT)

Connect to digital (coaxial) audio equipment.

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

Page 11

PREPARATION

Connections

ips



Depending on your TV and other equipment you wish to

connect, there are various ways you could connect the

DVD+VCR. Use connections described on pages 11-13.



Please refer to the manuals of your TV, VCR, Stereo

System or other devices as necessary to make the best

connections.



For better sound reproduction, connect the DVD+VCR’s

DVD/VCR AUDIO OUT jack to the audio in jacks of your

amplifier, receiver, stereo or audio/video equipment. See

Optional, Preferred TV Connections on pages 12-13.

Caution



Make sure the DVD+VCR is connected directly to the TV.

Tune the TV to the correct video input channel.



Do not connect the DVD+VCR’s DVD/VCR AUDIO OUT

jack to the phono in jack (record deck) of your audio

system.



Do not connect your DVD+VCR via your VCR. The DVD

image could be distorted by the copy protection system.

Connecting Antenna/Cable TV to DVD+VCR

Disconnect the antenna leads from the rear of the

TV.

Identify the type of cable from your antenna. If it is

a round cable as illustrated, it is a 75 ohm coaxial

antenna cable. This cable will connect directly to

the jack marked ANT.IN on your DVD+VCR.

If your antenna lead wire is a flat type antenna cable,

connect it to an Antenna Adapter (300-ohm to 75-ohm)

(not supplied) and slip the Adapter onto the ANT.IN

jack. The Adapter does not screw on to the DVD+VCR,

it just slips over the jack.

Without Cable Box

If your cable wire is connected to your TV without a converter

or descrambler box, unscrew the wire from your TV and attach

it to the ANT.IN jack on the DVD+VCR. Use the supplied round

coaxial cable to connect between the DVD+VCR’s RF.OUT

jack and the 75 ohm antenna input jack on the TV. With this

connection, you can receive all midband, super band, and

hyperband channels.

With Cable Box

If a converter is required in your cable system, follow the

instruction below:

The cable hookup permits both TV and DVD+VCR operation.

To view or record CATV channel 1 Tune the TV to the DVD+VCR output channel (CH 3 or 4). 2 Set the DVD+VCR channel selector to the output channel of

the Cable Converter box by using the CH/TRK (v/V) or

number (0-9) of your DVD+VCR. (Example: CH3)

3 Select the channel to view at the Cable Converter Box.

otes

 With this connection, you CANNOT record one program

while viewing another.

 If you are using a cable box to tune channels, it is not nec-

essary to do Auto Channel Programming as indicated on

page 15.

Cable TV

Wall Jack

Back Panel of

Typical Cable Box

Antenna Antenna

Cable TV

Wall Jack

Flat Wire

(300 ohm)

300/75 ohm

Adaptor

(Not supplied)

OR OR

Rear of DVD+VCR

Page 12

Connections (Continued)

Basic TV Connections



Make one of the following connections, depending on

the capabilities of the equipment to be connected.

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the

antenna in jack on the TV using the 75-ohm Coaxial

Cable supplied (R).

ote

If you use this connection, tune the TV to the

DVD+VCR’s RF output channel (CH 3 or 4).

How to set the DVD+VCR’s RF output channel

1. Set the TV to the VCR channel (3 or 4) depending

upon the selected channel.

2. When the DVD+VCR is turned off,

press and hold CH

(V/v) on the front panel for more than five seconds.

It will turn itself on and “RF03” or “RF04” appears in the dis-

play window.

Press CH (V/v) on the front panel or CH/TRK (v/V)

on the remote control to change the RF output chan-

nel (CH 03 or CH 04).

Turn off the DVD+VCR.

Audio/Video connection

Connect the DVD/VCR VIDEO OUT jack on the

DVD+VCR to the video in jack on the TV using the

video cable supplied (V).

Connect the Left and Right DVD/VCR AUDIO OUT

jacks on the DVD+VCR to the audio left/right in

jacks on the TV (A1) using the supplied audio

cables.

ote

If you use this connection, set the TV’s source selector

to VIDEO.

Optional, Preferred TV Connections

ote

You can ONLY watch and listen to DVD playback

through the connections shown below.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD+VCR

to the S-Video in jack on the TV using the optional

S-Video cable (S).

Connect the Left and Right AUDIO OUT jacks of

the DVD+VCR to the audio left/right in jacks on the

TV using the supplied audio cables (A2).

Component Video (Color Stream®) / Progressive Scan (ColorStream®pro) connection



If your television is a high-definition or “digital ready”

television, you may take advantage of the

DVD+VCR’s progressive scan output for the highest

video resolution possible.



If your TV does not accept the Progressive Scan for-

mat, the picture will appear scrambled if you try

Progressive Scan on the DVD+VCR.

Connect the COMPONENT/PROGRESSIVE SCAN

VIDEO OUT jacks on the DVD+VCR to the corre-

sponding in jacks on the TV using an optional Y Pb

Pr cable (C).

Connect the Left and Right AUDIO OUT jacks of

the DVD+VCR to the audio left/right in jacks on the

TV (A2) using the supplied audio cables.

otes

 Set the Progressive Scan to “On” on the setup menu

for progressive scan signal, see page 18.

 When you use Component Video signal, set the

Progressive Scan to “Off” on the setup menu.

 Progressive scan does not work with the analog video

connections (yellow VIDEO OUT jack).

Rear of TV

ANTENNA

INPUT

Rear of DVD+VCR

AUDIO INPUT

A1 VR

Rear of TV

VIDEO INPUT

Rear of DVD+VCR

COMPONENT VIDEO INPUT

AUDIO INPUT

S-VIDEO

INPUT

Page 13

PREPARATION

Connections (Continued)

Optional, Preferred TV Connections

ote

You can ONLY listen to DVD playback using COAXIAL

(X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.)

Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR

AUDIO OUT) jacks on the DVD+VCR to the audio left

and right in jacks on your amplifier, receiver, or stereo

system using the audio cables (for A1 or A2 connection)

supplied.

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

Connect one of the DVD+VCR’s DIGITAL AUDIO

OUT jacks (COAXIAL X) to the corresponding in

jack on your amplifier. Use an optional digital

(COAXIAL X) audio cable.

You will need to activate the DVD+VCR’s digital

output. (See “Digital Audio Output” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD+VCR (MPEG 2,

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

otes



If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

 Six Channel Digital Surround Sound via digital con-

nection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder.

 To see the audio format of the current DVD in the on-

screen display, press AUDIO.

Accessory Audio/Video (A/V) Connections to DVD+VCR

Connect the VCR IN LINE 1 or LINE 2 jacks on the

DVD+VCR to the audio/video out jacks on your

accessory component, using the optional audio/video

cables.

Rear of DVD+VCR

A2A1 X

AUDIO INPUT DIGITAL INPUT

Amplifier (Receiver)

COAXIAL

Page 14

VCR Operation Setup

On-Screen Display (OSD)

Some of these functions will be displayed every time

the DVD+VCR is operated.

❶❷ ❸ ❹ ❺

❻❼

❶ TAPE SPEED DISPLAY

Shows the current tape speed.

❷ FUNCTION DISPLAY

Indicates the current function.

❸ HI-FI DISPLAY

Indicates when this unit is playing back tape recorded with

Hi-Fi.

❹ CHANNEL DISPLAY

ndicates the selected channel (or LINE1, LINE2).

❺ STEREO/SAP DISPLAY (MONO is not displayed)

Shows the type of audio signal received by the VCR tuner.

❻ DATE DISPLAY

Shows the current date. (Month/Date/Day of the week

format)

❼ CLOCK/COUNT/REMAIN DISPLAY

Shows the current time, the tape counter and remaining time

on the tape.

Each press of the ENTER changes the TV

on-screen displays in the following sequence.

otes

 Function displays remain on the TV screen for 5 seconds.

 The clock (or tape counter, tape remaining) mode will be dis-

played until you press ENTER.

 The tape counter and the remaining tape length indicator

appear only when a cassette is inserted. Also, the remaining

tape length indicator appears after any tape operation.

EASY INFORMATION

If the Extended Data Service (XDS) signals are provid-

ed along with normal TV signal in your area or during

playback of a tape recorded with Extended Data

Service (XDS) signals, the station ID, program title, and

program details are shown on the TV screen.

When viewing a channel with Extended Data Service (XDS)

signals, press ENTER and the station ID will appear on the TV screen. Press ENTER again and the program details

will appear on the TV screen.

When viewing a tape recorded with Extended Data

Service (XDS) signals, press ENTER twice and the pro-

gram title and program details will appear on the TV

screen.

PROGRAM DETAILS LENGTH: Indicates the run length of a program. TIME REMAINING: Indicates the remaining time of a

program.

RATING: Indicates the rating of the current program

(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The

rating N/A means that the motion picture ratings are not

applicable to this program.

On-Screen Menus Setup

The SETUP, clock setting (CLOCK), and timer

recordings (PROGRAM) functions are accessed conve-

niently with the on-screen menus, that lead you through

each step. The following pages describe the on-screen

menu selections available.

Menu Selection

Your DVD+VCR allows remote control adjustment of

several features.

Press MENU and the MAIN menu will appear.

Select the desired menu with v/V button and then press ENTER.

ote

Menus remain on-screen for 3 minutes.

Press MENU when finished.

PLAY HI-FI CH 4 SP STEREO

APR 30, FRI 2:15 PM

REM 1:58

0:35:40

2:15 PM

STOP CH 4

SP STEREO

APR 30 , FRI 2:15 PM

Easy Information Screen

(Program details)

Easy Information Screen

(Station ID)

CH 4

SP WABC STEREO

“Home video” APR 30 , FRI 2:15 PM

PROGRAM DETAILS

“Home video”

LENGTH 01:00

TIME REMAINING 00:26

RATING N/A

CLOCK SET (page 16)

PROGRAM (page 22)

TUNING (page 15)

SETUP (page 15)

MAIN MENU

Page 15

PREPARATION

VCR Setup Menu Options

Press MENU and the MAIN menu will appear.

Use vv/VVto select the SETUP menu, then press ENTER.

The SETUP menu will appear.

Use vv/VVto choose a desired option on the SETUP menu. Then use bb/BBto make adjust-

ments.

FUNCTION OSD

The on-screen display of this DVD+VCR can be turned on or

off.

 Use b/B to switch the FUNCTION OSD ON or OFF.

AUDIO MODE

The DVD+VCR has two separate audio playback systems, the

high quality VHS Hi-Fi system and standard NORMAL mono

system. The same audio is generally recorded on both

systems. The VHS Hi-Fi system plays on separate (left and

right) channels, and the NORMAL system plays monaural

sound. The normal track is always played so the cassette can

be played on a DVD+VCR that does not have VHS Hi-Fi.

 AUDIO MODE can be switched between HI-FI and

NORMAL using b/B.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or

Second Audio Program (SAP) bilingual signals. Set this display

to the desired position when both MTS stereo and SAP signals

are received. When only one of the MTS signal is received, the

DVD+VCR automatically selects the corresponding receiving

mode (Stereo or SAP) regardless of the selected position. For

normal operation, the display should be in the STEREO posi-

tion. The DVD+VCR will then record a STEREO program when

available, and record a mono program IF the program is NOT

IN STEREO.

For weak STEREO and/or SAP broadcasts, changing the dis-

play to mono may give clearer sound.

 BROADCAST TYPE can be switched between STEREO,

SAP, and MONO using b/B.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is

in HI-FI position] for selecting the audio output signals from the

AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi-

tion, so that when a stereo tape is played, the stereo sound will

be heard through the left and right channels. If a mono tape is

played and the audio output is set to stereo, the same mono

sound will be heard from both left and right channels.

 AUDIO OUTPUT can be switched between STEREO, LEFT,

and RIGHT using b/B.

Press MENU when finished.

Channel Selection

This DVD+VCR is equipped with a frequency synthe-

sized tuner capable of receiving up to 181 channels.

These include VHF channels 2-13, UHF channels 14-69

and CATV channels 1-125.

Preparation:



Connect the DVD+VCR to the desired type of antenna or

cable TV system, as shown in Connecting Antenna/Cable TV

to DVD+VCR on page 11.

AUTO CHANNEL PROGRAMMING

Press MENU and the MAIN menu will appear.

Use vv/VVto select the TUNING menu, then press ENTER.

The TUNING menu will appear.

Use vv/VVto choose the SOURCE SELECT option, then use bb/BBto select TUNER.

Press b/B repeatedly to switch between TUNER, LINE1,

and LINE2.

Press vv/VVto choose the AUTO CHANNEL SET option, then press bb/BBto set the channel.

• The tuner will automatically cycle through all

available channels (TV/CATV) in the area and place

them in the tuner’s memory.

• After the AUTO CHANNEL SET is complete, the TUN-

ING menu will hide and return to the TV screen automat-

ically.

Make sure the TUNING BAND is set appropriately (TV or CATV).

• TV : If you are using a standard antenna to receive

channels.

CATV : If you are using basic cable to receive channels.

•Change the setting of TUNING BAND to check the TV

channels.

Use CH/TRK (vv/VV) on the remote control or CH (

VV//vv

) on the front panel to cycle the DVD+VCR

through the channels in memory.

TO ADD OR ERASE CHANNELS

This feature allows you to add or erase channels from

memory manually.

1 Use vv/

to choose the CH. ADD/DEL option on the

TUNING menu. Use b/B to select a channel to add

or erase.

2 Use ENTER to add or erase the channel.

Repeat steps 1 and 2 to add or erase other

channels.

3 Press MENU to return to the TV screen.

VCR Operation Setup (Continued)

Page 16

VCR Operation Setup (Continued)

Setting the Clock

The DVD+VCR gives you two ways to set the time and

date: the Auto Clock Feature or manually. The Auto

Clock feature enables the DVD+VCR to set up the clock

while the DVD+VCR is turned off.

Auto Clock Set

The Auto Clock Set feature is set to ON at the factory. In the

ON setting, the DVD+VCR looks for a channel carrying XDS

(Extended Data Services) information. XDS updates the clock

using the Coordinated Universal Time.

The Auto Clock feature enables the DVD+VCR to set up

the clock while the DVD+VCR is turned off.

Press MENU and the MAIN menu will appear.

Use vv/VVto choose the CLOCK menu. Press ENTER and the CLOCK menu will appear.

UseVVto choose the AUTO CLOCK SET option. Use bb/BBto choose ON.

The Auto Clock Set feature is set to ON at the factory. In

the ON setting, the DVD+VCR looks for a channel

carrying XDS (Extended Data Services) information. XDS

updates the clock using the Coordinated Universal Time.

Use EEto choose the DAYLIGHT SAVINGS option. Use

or GGto choose AUTO, ON, or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR adjusts the clock for Daylight

Saving Time automatically.

Use EEto choose the TIME ZONE option. Use

or GGto choose the correct time zone (AUTO, EASTERN, CENTRAL, MOUNTAIN, PACIFIC, ALASKA or HAWAII).

If “AUTO” is selected as the time zone, the VCR sets the

clock using the first Coordinated Universal Time informa-

tion it finds in a broadcast signal.

Press MENU when finished.

Turn off the DVD+VCR and the auto clock set feature sets the time.

ote

There are cases where the TV station does not send or sends

wrong date and/or time information and the DVD+VCR sets the

incorrect time.

If this happens we recommend that you set the clock manually.

Manual Clock Set

Press MENU and the MAIN menu will appear.

Use vv/VVto choose the CLOCK menu. Press ENTER and the CLOCK menu will appear.

Use bb/BBto choose the month.

Use VVto choose the DAY option. Use bb/BBto choose the date.

The day of the week will display automatically.

Use VVto choose the YEAR option. Use bb/BBto choose the year.

Use VVto choose the TIME option. Use bb/BBto choose the time. Press and hold b/B to advance clock

continuously.

Use EEto choose the DAYLIGHT SAVINGS item. Use

or GGto choose AUTO, ON or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR adjusts the clock for Daylight

Saving Time automatically.

Press MENU when finished.

ote

If setting the clock manually, “AUTO CLOCK SET” must

set to “OFF”.

If set to “ON”, an incorrect date and/or time will be

entered again when the DVD+VCR is turned off.



The clock uses the 12-hour system. (Be sure to set AM

and PM correctly.) (AM does not appear.)



The initial Clock Setting is JANUARY 1, 2004, 12:00 AM.

Things to know before starting

Page 17

PREPARATION

DVD Operation Setup

General Explanation

This manual gives the basic instructions for operating

the DVD+VCR. Some DVDs require specific operation

or allow only limited operation during playback. When

this occurs, the symbol appears on the TV screen,

indicating that the operation is not permitted by the

DVD+VCR or is not available on the disc.

On-Screen Display

The general playback status can be displayed on the

TV screen. Some options can be changed on the menu.

On-screen display operation

Press DISPLAY during playback.

Use vv/VVto select an option.

The selected option will be highlighted.

Use bb/BBto change the setting of an option.

The number buttons can be also be used for setting

numbers (e.g., title number). For some functions,

press ENTER to execute the setting.

Temporary Feedback Field Icons

Repeat Title (DVD)

Repeat Chapter (DVD)

Repeat A-B

Repeat Off

Resume play from this point

Action prohibited or not available

otes

 Some discs may not provide all of the features on the

on-screen display example shown below.

 If no button is pressed for 10 seconds, the on-screen

display disappears.

Options

Title Number

Chapter Number

Time search

Audio language

and Digital Audio

Output mode

Subtitle language

Angle

Sound

Function (Use

vv/VV

to select desired option.)

Shows the current title number and total number of titles, and skips to the desired title number.

Shows the current chapter number and total number of chapters, and skips to the desired chapter number.

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

Shows the current audio soundtrack language, encoding method, and channel number, and

changes the setting.

Shows the current subtitles language, and

changes the setting.

Shows the current angle number and total number of angles, and changes the angle number.

Shows the current sound mode, and

changes the setting.

Selection Method

bb/BB

,or

Numbers , ENTER

bb/BB

,or

Numbers , ENTER

bb/BB

, AUDIO

bb/BB

, SUBTITLE

bb/BB

, ANGLE

bb/BB

1/3

1/12

-:--:--

1 ENG

5.1CH

OFF

1/1

NORM.

ABC

DVD

TITLE

CHAPT

A B

OFF

Page 18

DVD Operation Setup (Continued)

Initial Settings

You can set your personal preferences on the

DVD+VCR.

General Operation

Press SETUP.

The Setup menu appears.

Use vv/VVto select the desired option.

The screen will show the current setting for the

selected option, as well as alternate setting(s).

While the desired option is selected, press BB, then vv/VVto select the desired setting.

Press ENTER to confirm your selection.

Some options require additional steps.

Press SETUP, RETURN, or NN(PLAY) to exit the setup menu.

Language

Disc Language

Select a language for the disc’s Menu, Audio, and

Subtitle features.

riginal : The original language set for the disc is selected.

Other : To select another language, use number buttons to

enter the corresponding 4-digit number according to the

language code list on page 37. If you enter the wrong

language code, press CLEAR.

ote

Disc Language selection may not work for some DVDs.

Menu Language

Select a language for the Setup menu. This is the menu

you see when you press SETUP.

Picture

TV Aspect

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays pictures with masking bars above and

below the picture.

4:3 Panscan: Select when a standard 4:3 TV is con-

nected. Displays pictures cropped to fill your TV screen.

Both sides of the picture are cut off.

16:9 Wide: Select when a 16:9 wide TV is connected.

Progressive Scan

Progressive Scan Video provides the highest resolution

pictures with less flicker and line structure.

If you are using the COMPONENT/PROGRESSIVE

SCAN VIDEO OUT jacks, but are connecting the

DVD+VCR to a standard (analog) television, set

Progressive Scan to Off.

If you are using the Component Video jacks for

connection to a TV or monitor that is compatible with a

progressive scan signal, set Progressive Scan to On.

Caution

Once the setting for progressive scan output is entered,

an image will only be visible on a progressive scan

compatible TV or monitor. If you set Progressive Scan

to On in error, you must reset the unit.

1) Remove any disc from the unit and close the disc

tray. See that “dISC” is displayed on the display

window.

2) Press STOP (99) and hold it for more then five

seconds before releasing it. The video output will be

restored to the standard setting and a picture will

once again be visible on a conventional analog TV or

monitor.

DVD

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Original

German

English

Italian

Chinese

Polish

Hungarian

French

Spanish

Other — — — —

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Disc Audio

English

Spanish

French

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

4:3 Letterbox

4:3 Panscan

16:9 Wide

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Original

German

English

Italian

Chinese

Polish

Hungarian

French

Spanish

Other — — — —

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Off

Page 19

PREPARATION

DVD Operation Setup (Continued)

Sound

Digital Audio Output

Each DVD disc has a variety of audio output options.

Set the DVD+VCR’s Digital Audio Output according to

the type of audio system you use.

DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if

you have connected the DVD+VCR’s DIGITAL AUDIO

OUT jack to a Dolby Digital decoder (or an amplifier or

other equipment with a Dolby Digital decoder).

Stream/PCM: Select Stream/PCM if you have

connected the DVD+VCR’s DIGITAL AUDIO OUT jack

to an amplifier or other equipment with a DTS decoder,

Dolby Digital decoder or MPEG decoder.

PCM: Select when connected to a 2 channel digital

stereo amplifier. The DVD+VCR outputs sounds in the

PCM 2ch format when you play a DVD video disc

recorded with a Dolby Digital, MPEG1, or MPEG2

recording system.

Sample Frequency

To change the Sample Frequency setting, first select

the desired Digital Audio Output as indicated above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz. When this choice is

made, this unit will automatically convert any 96KHz

signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling

96KHz signals, select 96KHz. When this choice is

made, this unit will pass each type of signal through

without any further processing.

Others

The DRC, Vocal and Auto Play settings can be

changed.

 Use v/V to select the desired option and then press

ENTER repeatedly to select On or Off.

DRC (Dynamic Range Control)

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

Vocal

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

Auto Play

You can set up the DVD Player so a DVD disc automat-

ically starts playing whenever the DVD is inserted.

If Auto Play mode is set to On, this DVD player will

search for a title that has the longest playback time and

then play back the title automatically.

On: Auto Play function works. Off: Auto Play function does not work.

ote

The Auto Play function may not work for some DVDs.

DVD

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

DRC On

Off

Vocal

Auto Play

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

DOLBY DIGITAL

/PCM

Stream/PCM

PCM

Sample Freq.

48 KHz

96KHz

Page 20

DVD Operation Setup (Continued)

Parental Control

Rating

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are

country dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Select Rating on the Setup menu using vv/

buttons.

While Rating is selected, press BB.

When you have not entered a password yet.

Enter a 4-digit password using the numbered but-

tons to create a personal 4-digit security password,

then press ENTER. Enter the 4-digit

password again and press ENTER to verify.

When you have already entered a password;

Enter a 4-digit password using the numerical

buttons to confirm the personal 4-digit security

password, then press ENTER.

If you make a mistake before pressing ENTER, press

CLEAR and enter 4-digit security password again.

Select a rating from 1 to 8 using vv/VVbuttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions.

Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc.

Press ENTER to confirm your rating selection, then press SETUP to exit the menu.

Country Code

Enter the code of a country whose standards were used

to rate the DVD video disc, referring to the list (See

“Country Code List”, page 38.).

Select the Country Code option using the v/V buttons on the setup menu.

While Country Code is selected, press B.

Follow step 3 of “Rating” on left.

Select the first character using the v/V buttons.

Press 2 to shift to second character and select the second character using v/V buttons.

Press ENTER to confirm your Country Code selection, then press SETUP to exit the menu.

ote

Confirmation of the 4-digit password is necessary when

the password is changed (see Changing the 4-digit

password below ).

Changing the 4-digit password

1 Follow Steps 1-2 as shown above to the left (Rating). 2 Enter the old password, then press ENTER. 3 Select Change using v/V buttons then press

ENTER.

4 Enter the new 4-digit password, then press ENTER. 5 Enter exactly the same password a second time and

verify by pressing ENTER.

6 Press SETUP to exit the menu.

If you forget your 4-digit password

If you forget your password, to clear the current pass-

word follow the procedure below.

1 Press SETUP to display the setup menu. 2 Enter the 6-digit number 210499 and then press

ENTER.

The 4-digit password is cleared.

3 Enter a new password as shown

above to the left

(Rating).

DVD

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Code Set

U S

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Unlock

Change

Page 21

OPERATION

VCR Operation

Normal Playback

Preparation:



Turn on the TV.



Tune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO.



If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to

VIDEO.



Set the Output Source to VCR as shown in “Selecting the

Viewing Source” on page 6.

Insert a prerecorded video cassette.

The indicator will light and the DVD+VCR will

power-up automatically.

 Make sure that the indicator in the display

window is not lighted. If it is, press POWER once.

 If a tape without a safety tab is inserted, the unit will

start playback automatically.

Press NN(PLAY) once.

PLAY appears on the TV screen .

 It is not necessary to select the tape speed for

playback. It will be automatically selected by the

DVD+VCR.

 In playback, the TV/VCR selector switches to VCR

mode automatically.

Press STOP (xx) to stop playback.

STOP appears on the TV screen.

 If the tape reaches the end before STOP (x) is

pressed, the DVD+VCR will automatically stop, rewind

and eject the tape, and it will turn itself off.

Tracking Control

Auto Tracking

The automatic tracking function adjusts the picture to

remove snow or streaks.

The AUTO TRACKING function works in the following

cases:

 A tape is played back for the first time.

 Tape speed (SP, LP, SLP) changes.

 Streaks or snow appear because of scratches on the tape.

Manual Tracking

If noise appears on the screen during playback, press

either CH/TRKvv/VVon the remote control or CH (

vv/VV

)

on the front panel until the noise on the screen is

reduced.

 In case of vertical jitter, adjust tracking controls very

carefully.

 Tracking is automatically reset to normal when the tape is

ejected or the power cord is unplugged for more than 3

seconds.

Special Effect Playbacks

Special effects playback notes

 Horizontal lines (noise bars) will appear on the TV screen.

This is normal.

 The audio is automatically muted during special effect modes,

so there is no sound during search.

 During high-speed picture search mode, a short period is

needed to stabilize tape speed when re-entering the PLAY

mode. Slight interference may be observed during this period.

This function lets you quickly and visually search for a

desired tape section in either direction: forward or

reverse.

1 Press BACKWARD (m) or FORWARD (M)

during playback.

The DVD+VCR will be activated in the SEARCH

mode.

 If the DVD+VCR is left in the SEARCH mode for more

than 3 minutes, the DVD+VCR will automatically enter the

PLAY mode, to protect the tape and video heads.

2 To return to playback, press N (PLAY).

Still Picture and Frame-by-Frame Playback

1 Press PAUSE/STEP (X) during playback.

Still picture will appear on the TV screen.

 If a still picture vibrates vertically, stabilize it using

v/V on the remote control.

 If the DVD+VCR is left in the STILL mode for more than 5

minutes, the DVD+VCR will automatically enter the STOP

mode to protect the tape and video heads.

Press PAUSE/STEP (X) repeatedly to advance the

video picture one frame at a time while viewing a still

picture.

3 To return to playback, press N (PLAY).

Slow Motion

1 While in still mode, press FORWARD (M).

The tape will be played back at a speed 1/19 times

slower than the normal speed.

 During slow playback, use v/V on the Remote Control to

minimize noise bands.

 If slow motion mode continues for more than 3 minutes,

the DVD+VCR will automatically change to playback

mode.

2 To return to playback, press N (PLAY).

CM SKIP (Commercial Skip)

This is useful for skipping commercials or short program

segments.

1 Press CM SKIP during playback.

The tape will fast forward picture search through 30

seconds of recording.

 Skipping time can be extended by pressing CM SKIP

repeatedly.

 Subsequent presses result in advancing the fast forward

picture search time by 30-second increments (maximum 3

minutes).

2 When the search is complete, the DVD+VCR will go

into playback mode automatically.

Page 22

VCR Operation (Continued)

Normal Recording

Preparation:



Turn on the power of both the DVD+VCR and TV.



Tune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO.



If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to

VIDEO.

Insert a video cassette with the safety tab intact.

Select the desired channel with CH/TRK (vv/VV).



If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select the

LINE1 or LINE2 with INPUT.

Set the desired recording speed (SP or SLP) with SPEED.



This DVD+VCR is not designed to record in LP mode.

Set the MTS mode as desired (See page 15, 25).

Press REC/ITR (zz) once.

Recording will start. (The REC indicator will light in

the display window.)



REC indicator appears only when the Output Source is

set to VCR.



If a cassette with no safety tab is loaded, the cassette

will be ejected automatically.

Press STOP (xx) to stop recording.

If the tape reaches the end before STOP (x) is pressed,

the DVD+VCR will automatically stop, rewind, eject the

tape and turn itself off.

To pause recording

1 Press PAUSE/STEP (X) to pause the tape during

recording.

The REC indicator will flash in the display window.

2 When you want to continue recording, press

PAUSE/STEP (X) or press REC/ITR (



After 5 minutes in pause mode, the tape will be stopped

automatically to protect the tape and the video heads.

To record one TV program while watching another

1 Use TV/VCR to select the TV mode during recording.

The TV indicator appears.

2 Using the TV, select the channel to be viewed.

ips

Always use PAUSE/STEP (X) for best results when making

changes during recording.

For example: To change channels during recording, first press

PAUSE/STEP (X) to put the unit in Pause mode. Then select

the desired channel on the DVD+VCR, and press

PAUSE/STEP (

X) again to resume recording.

Timer Recording

This DVD+VCR can be programmed to record up to 8

programs within a period of 1 year. For unattended

recording, the timer needs to know the channels to be

recorded and the starting and ending times.

Preparation:



Turn on the power of both the DVD+VCR and the TV.



Be sure the TV is set to the DVD+VCR output channel (3 or 4).



Make sure the TUNING BAND in the TUNING menu is set

appropriately (TV or CATV).

Press MENU and the MAIN menu will appear.

Use vv/VVto choose the PROGRAM menu.

Press ENTER to go to the PROGRAM menu.

The PROGRAM menu will appear.



If all 8 programs have been entered, FULLY

PROGRAMMED message will appear for a moment

and then PROGRAM 1 will appear on the TV screen.

Use bb/BBto choose the PROGRAM No. (1-8).

Use VVto choose the MONTH option. Use bb/BBto choose the desired month.

Use VVto choose the DAY option. Use bb/BBto choose the desired day.

Use VVto choose the START option. Use bb/BBto choose the desired start time.

Use VVto choose the STOP option. Use bb/BBto choose the desired stop time.

Use VVto choose the CHANNEL option. Use bb/BBto choose the desired channel

(Channel, LINE1 or LINE2).

Cable Users: If you have CABLE TV and used Cable Box

in Connecting Antenna/Cable TV to DVD+VCR (page 11),

using a cable box converter, you must set the channel in

this step to match the cable box output channel (usually

CH 3 or 4). Change channels on the cable box instead of

with the DVD+VCR.



If you try to set the program timer before setting the clock,

PLEASE SET THE CLOCK appears for a moment and

then CLOCK menu appears on the TV screen. Set the time

and date before proceeding.



Make sure a tape is in the DVD+VCR and the safety tab is

in place or the tape will be automatically ejected.

Things to know before starting

Page 23

OPERATION

VCR Operation (Continued)

1100

Use VVto choose the SPEED option. Use bb/BBto choose the desired recording

speed (AUTO, SP or SLP).



AUTO mode determines how much tape is left and

switches speed from SP to SLP, if necessary, to

complete recording the program. There will be some

picture and sound distortion at the point of the speed

change.

1111

Use VVto choose the REPEAT option. Use bb/BBto choose the desired repeat (ONCE,

WEEKLY or DAILY).

ONCE event....for recording up to 8 programs on a

single day or over the days within a period of 1 year.

WEEKLY event....for recording up to 8 programs on a

certain day of every week.

DAILY event....for recording up to 8 programs at the

same time(s) Monday through Friday.

If the input data is wrong, use vvto select the data and correct it using bb/BB.

1122

Press MENU, the program will be memorized by the DVD+VCR.



indicator lights in the display window.



If the program preset time has past, the PAST TIME

PROGRAMMED message will appear on the TV

screen. Return to the incorrect program and program

it with the correct time.



If you had entered a past date, timer recording will

be performed on that date of the next year.



Additional programs may be entered by repeating

steps 1-12.

Cable Users: If your cable hookup is via a Cable

converter box, you can program multiple recordings

only on the converter box output channel. This is

because the converter determines what channel you

view through your DVD+VCR.

If you are finished programming and you want to set the

DVD+VCR to record the programs you have entered,

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE DVD+VCR. The DVD+VCR is now set to record the preset

programs.

otes

If the power fails or the DVD+VCR is unplugged from the AC

outlet, the correct clock time and timer settings are kept in

memory for approximately 3 seconds. After 3 seconds, the

clock and program timer must be reset when power is

restored. Reset the clock according to instructions.

After setting up a timer recording, recording will start if no other

timer recordings are scheduled to occur at the same time (see

“Program Priority” at right).

Checking (Erasing) Timer Record Programming

Programming can be checked whenever the DVD+VCR

is turned on.

1 Press MENU and the MAIN menu will appear. 2 Use v/V to choose the PROGRAM menu.

Press ENTER and the PROGRAM menu will appear.

3 Use b/B to select a program you want to check or

erase. If you want to erase the program, press

CLEAR.

4 Press MENU to return to the TV screen.

Program Priority

If the starting and ending

times of two or more timer

recordings overlap on the

same day, priority is given to

the earliest recording. For

example, in the diagram at

left Program number 2 will

not be recorded until Program number 1 is finished. The

first part of Program number 2 will not be recorded.

Likewise, Program number 3 will not be recorded until

Program number 2 is finished, and so on.

Page 24

Instant Timer Recording

Instant Timer Recording allows you to make a recording

easily of a preset length without using the program

timer.

Preparation:

 Turn on the power of both the DVD+VCR and the TV.

 Be sure the TV is tuned to the DVD+VCR output channel (3

or 4).

 If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to

VIDEO.

Insert a video cassette with the safety tab intact.

Select the desired channel with vv/VVor number (0-9).

The channel number appears on the TV screen.

 If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select LINE1 or

LINE2.

Select the desired recording speed (SP or SLP) with SPEED.

The tape speed will appear on the TV screen.

Press REC/ITR (zz) twice.

The menu as illustrated, will appear on the TV

screen.

 Recording will start (The indicator will light).

Press REC/ITR (zz) repeatedly to select the recording time length.

At the end of the recording, the DVD+VCR will stop

recording and shut off.

 During Instant Timer Recording, changing the channel

on the DVD+VCR will not be possible.

 You can stop the recording by pressing STOP (x).

INSTANT TIMER RECORD MENU

Checking the Recording Time

Press REC/ITR (z) once to check the recording time.

The recalled setting will automatically return to the TV

screen after 6 seconds.

To extend the Recording Time

The recording time can be extended anytime by press-

ing REC/ITR (z).

Subsequent presses result in advancing the recording

time by 30-minute increments.

otes

 If you press PAUSE/STEP (X) during instant timer record-

ing, the DVD+VCR will enter the recording pause mode.

Instant timer recording is cancelled.

 If the DVD+VCR is set to “0H00M”, the DVD+VCR goes to

normal recording mode.

Dubbing and Editing

If you wish to edit or dub your camcorder (or another

VCR) recordings to this DVD+VCR, the rear (or Front)

panel mounted Audio and Video (A/V) input jacks

make the connections quick and easy. These direct

A/V jacks will also provide better picture results than

using the RF jack on the rear panel.

Connect the camcorder’s (or another VCR’s) A/V outputs to your DVD+VCR as illustrated on page

13.

Set the input channel “LINE2”. (use INPUT to select LINE2.)



If you have connected your DVD+VCR to the A/V

input jacks on the rear of DVD+VCR, you should

select the input channel LINE1 by pressing INPUT

twice.

Play the tape in the camcorder (or another VCR). If you have a TV attached to your DVD+VCR, you can see the video playing.

When you desire the recording to begin, press DVD+VCR’s REC/ITR (zz) once to start.

ote

Before recording, please confirm the recording start position.

Copying from DVD to VCR

This unit allows you to copy the contents of a DVD to a

VHS tape.

ote

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted

to copy Macrovision encoded DVDs. “Lock” is

displayed in the display window.

Insert Disc

Insert the disc you wish to copy in the DVD deck

and close the disc tray.

Insert VHS Tape

Insert a blank VHS video tape into the VCR deck.

Press the COPY button on the unit front panel.

The DVD will go into Play mode and the VCR will

go into Record mode.

 If the DVD disc menu appears, you may need to press

N (PLAY) manually to begin copying.

 “REC” indicator will light.

Stopping the Copy Process

When the DVD is finished playing, press the VCR button

on the remote control and then press STOP (x) to end

copying.

You must stop the Copy process manually when the DVD

movie ends, or the unit may replay and record over and

over again.

ote

When you stop the DVD playback during copying, the VCR

recording mode stops automatically.

VCR Operation (Continued)

0H30M ..... 9H00M ➝ 0H00M

Length Display

(each additional press of

REC/ITR (zz) increases recording

time 30 minutes)

INSTANT TIMER RECORD

CHANNEL 2 SPEED SP

START NOW LENGTH 0H30M

Page 25

OPERATION

VCR Operation (Continued)

VHS Hi-Fi Stereo System/ MTS Broadcast

This DVD+VCR is equipped with the VHS Hi-Fi audio

sound system for recording and playback. The informa-

tion below gives a brief description of Hi-Fi audio and

how to record and play a tape in the Hi-Fi audio mode.

Playback with Hi-Fi Stereo Audio Sound

A stereo TV with AUDIO/VIDEO input jacks or a stereo

audio system is required for true stereo playback. To

experience the full and rich stereo sound available with

Hi-Fi recorded tapes, we recommend the connection of

this unit to a home stereo audio system.

Set the AUDIO MODE option to HI-FI on the SETUP menu .

Set the AUDIO OUTPUT option to STEREO position.

(STEREO) POSITION: The left channel sound (L) is

heard from the left speaker and the right channel sound

(R) is heard from the right speaker.

(LEFT) POSITION: The left channel sound (L) is heard

from both speakers.

(RIGHT) POSITION: The right channel sound (R) is heard

from both speakers.

Press MENU.

Insert a cassette and press NN(PLAY).

Adjust volume at your stereo system.

MTS (Multi-Channel TV Sound)

This DVD+VCR will decode MTS stereo and bilingual

(SAP) off-the-air broadcast sound signals. It also

decodes stereo TV sound from local cable companies,

as long as they operate on assigned cable frequencies

and use the EIA-recommended MTS stereo/bilingual TV

sound system.

Multichannel TV Sound Indicator (MTS)

Shows onscreen as illustrated below when ENTER is

pressed.



One or both of the indicators will light, depending on the

MTS broadcast.

If only STEREO appears on the TV screen.

The DVD+VCR can record in stereo onto the VHS Hi-Fi audio

tracks when the BROADCAST TYPE option is in the STEREO

position. The DVD+VCR will also record mono audio onto the

mono audio track.

If only SAP appears on the TV screen.

Set the BROADCAST TYPE option to SAP.

If STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE option to select the desired

recording mode (STEREO or SAP).

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which

is used for a second language or additional information.

When the station broadcasts a Second Audio Program,

follow the procedure below to record the SAP.

Insert a video cassette with the safety tab intact.

Set the BROADCAST TYPE option to SAP (SETUP menu).

Do this if only the SAP appears on the TV screen or you

know the program will use the SAP.

Press MENU.

Select the desired recording speed (SP or SLP) with SPEED.

Select the desired channel. SAP should appear on the TV screen.

Press REC/ITR (zz) once

You are now recording the program you see and hear on the

TV.

Press STOP (xx) to stop recording.

Page 26

VCR Operation (Continued)

Tape Counter Memory Feature

Real-Time Counter

Shows length of tape run in hours, minutes, and

seconds. Press CLK/CNT to select the real-time

counter display.

Every press of CLK/CNT changes the TV screen as

illustrated below.



Counter changes to “0:00:00” when the cassette is

ejected.



The real-time counter does not operate if nothing is

recorded on the tape.



The real-time counter will not work unless a tape is

inserted.

Counter Memory Function

This is useful if there is a section of tape you want to

view immediately after recording or if you want to return

to the same point several times.

Begin recording or playing a tape.

Press CLK/CNT repeatedly to display the real-time counter on the TV screen.

At the point that you want locate later, reset the real-time counter to “0:00:00” by pressing CLEAR.

Continue to play or record.

Press STOP (xx) when recording or playback finishes.

Press BACKWARD (mm).

The tape automatically stops when the tape counter

returns to about “0:00:00”.

Tape Remaining

This function shows the remaining time on the tape

during recording or playback.

Press CLK/CNT repeatedly until the REM indicator

appears on the TV screen during recording or playback.

ote

The remaining tape length indicator may not be displayed

correctly depending on the condition of the tape and the kind of

the tape (T-140, T-160, or T-210 etc.).

Additional Information



In manual recording, Timer recording, Instant Timer

Recording, playback, or fast forward modes, the DVD+VCR

automatically starts rewinding the tape at the end of the

tape. The cassette will stop at the beginning of the tape and

be ejected, and the DVD+VCR will turn itself off.



After you have finished using the DVD+VCR, rewind, eject,

and remove the cassette. Place the cassette in its protec-

tive sleeve to protect it from dust. It is not necessary to

rewind the cassette before removing it, but if you do, it will

be ready to play or record the next time you use it.



Be sure the DVD+VCR Channel Selector is on the correct

channel you wish to record. The channel that is being

recorded can always be checked by tuning the television to

the DVD+VCR channel (3 or 4) and pressing the TV/VCR

selector to turn the DVD+VCR’s TV indicator off.



Do not attempt to hook up more than one television set to

the DVD+VCR for either recording or playback.

Auto Play System

This DVD+VCR features automatic playback.

Load a cassette (with the safety tab removed).

 The Output Source is changed to VCR mode automatically.

 The power turns on automatically and playback begins.

 At the end of the tape, the DVD+VCR stops, then rewinds.

 The cassette is ejected after rewinding and the VCR turns

itself off automatically.

ote

Auto power off does not function during regular DVD play

mode. (DVD+VCR power stays on.)

S-VHS Quasi Playback (SQPB)

 This DVD+VCR can play back S-VHS recorded tapes,

however, it cannot make recordings using S-VHS format

tapes.

 SQPB is an abbreviation for S-VHS Quasi Playback.

2:15 AM 0:05:25 REM 1:07

CLOCK COUNTER REMAINING TIME

LOAD

TAPE

AUTO

PLAY

AUTO

REWIND

AUTO

EJECT

AUTO

POWER

OFF

Page 27

OPERATION

DVD Operation

Playing DVDs

Playback Setup

 Turn on the TV and select the video input source con-

nected to the DVD+VCR.

 Audio system: Turn on the audio system and select

the input source connected to the DVD+VCR.



Set the Output Source to DVD as shown in “Selecting

the Viewing Source” on page 6.

Press OPEN/CLOSE (ZZ) to open the disc tray.

Load your chosen disc in the tray, with the label facing up.

When a double-sided DVD is inserted, make sure

the side you want to play is facing down.

Press OPEN/CLOSE (ZZ) to close the tray.

Playback starts automatically. If playback does not

start, press N (PLAY).

In some cases, the disc menu might appear

instead.

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD which contains a menu.

Use b/B/v/V buttons to select the title/chapter you

want to view, then press ENTER to start playback.

Press TITLE or DISC MENU to return to the menu

screen.

otes

 If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit password

must be entered and/or the disc must be authorized

(see Parental Control, on page 20).

 DVDs may have a Region Code.

 Yo ur DVD+VCR will not play discs that have a Region

Code different from your DVD+VCR. The Region

Code for this DVD+VCR is 1 (one).

 Do not keep a fixed image displayed on the screen

for a long time.

Screen Saver

The screen saver picture appears if you leave the

DVD+VCR in Stop mode for about five minutes.

General Features

ote

Unless stated otherwise, all operations described use

the remote control. Some features may also be

available on the Setup menu.

Selecting other TITLEs

When a disc has more than one title, you can select

another title as follows:



Press DISPLAY, then press the appropriate number

buttons (0-9) to select a title number.

Selecting other CHAPTERs

When a title on a disc has more than one chapter or a

disc has more than one track, you can select another

chapter as follows:

 Press SKIP . or > briefly during playback to

return to the beginning of the

current chapter or to select the next chapter.



Press SKIP . twice briefly to step back to the pre-

vious chapter.



To go directly to any chapter during playback,

press DISPLAY. Use vv/VVto select Chapter icon.

Then, enter the chapter number with the number

buttons (0-9).

ote

For two-digit numbers, press the numbered buttons

(0-9) in rapid succession.

Slow Motion

1 Press PAUSE/STEP (X) during playback.

The DVD+VCR will now go into PAUSE mode.

2 Press BACKWARD (m) or FORWARD (M)

during pause mode.

The DVD+VCR will enter SLOW mode.

3 Use BACKWARD (m) or FORWARD (M) to select

the required speed: t 1/16, t 1/8, t 1/4, t 1/2 (backward), or T 1/16, T 1/8, T 1/4, T 1/2 (for-

ward).

4 To return to playback, press N (PLAY).

DVD

1 /12

1 /3

Page 28

DVD Operation (Continued)

General Features (Continued)

Still Picture and Frame-by-Frame Playback

1 Press PAUSE/STEP (X) during playback.

The DVD+VCR will go into PAUSE mode.

2 With a DVD, you can advance the picture frame by

frame by pressing PAUSE/STEP (X) repeatedly on

the remote control.

3 To return to playback, press N (PLAY).

1 Press BACKWARD m or FORWARD M during

playback.

The DVD+VCR will now go into SEARCH mode.

2 Press BACKWARD m or FORWARD M repeated-

ly to select the required speed:

mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward).

3 To return to playback, press N (PLAY).

Random

1 Press RANDOM during playback or in Stop mode.

The unit automatically begins Random Playback and

“RANDOM” appears on the TV screen.

2 To return to normal playback, press RANDOM until

“NORMAL” appears on the TV screen.

By pressing SKIP . or > during Random play-

back, the unit selects another title (track) and resumes

Random playback.

ote

This function only works with DVD Karaoke discs.

Repeat

DVD Video Discs - Repeat Chapter/Title/Off

1 To repeat the currently playing chapter, press

REPEAT.

The Repeat CHAPT icon appears on the TV screen.

2 To repeat the title currently playing, press REPEAT a

second time.

The Repeat TITLE icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat OFF icon appears on the TV screen.

Repeat A-B

To repeat a sequence in a title:

1 Press A-B at your chosen start point.

A*appears briefly on the TV screen.

2 Press A-B again at your chosen end point.

ABappears briefly on the TV screen, and the repeat

sequence begins.

3 To cancel the sequence, press A-B.

Time Search

The Time Search function allows you to start playing at

any chosen time on the disc.

1 Press DISPLAY during playback. The on-screen dis-

play appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

2 Within 10 seconds, use

vv/VV

to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

3 Within 10 seconds, use the numbered buttons to

enter the required start time. Enter hours, minutes

and seconds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

4 Within 10 seconds, press ENTER.

Playback starts from the selected time on the disc. If you

enter an invalid time, playback will continue from the current

point.

3D Surround

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

1 Press DISPLAY during playback.

2 Use v/V to select the sound icon.

The sound option will be highlighted.

3 Use b/B to to select “3D SUR”.

To turn off the 3D Surround effect, select “NORM.”.

Zoom

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

If you press ZOOM repeatedly, the magnification level

increases up to six steps.

2 Use b/B/v/V buttons to move through the zoomed

picture.

3 Press CLEAR to resume normal playback or return to

the paused image.

otes

 The Zoom function may not work for some DVDs.

 The Zoom function may not work on multi-angle

scenes.

DVD

OFF

A B

A *

DVD

OFF

TITLE

CHAPT

DVD

Karaoke DVD

DVD

0:16:57

-:--:--

NORM.

3D SUR

Page 29

OPERATION

DVD Operation (Continued)

General Features (Continued)

Marker Search

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

1 During disc playback, press MARKER when playback

reaches the spot that you want to memorize.

The Marker icon will appear on the TV screen briefly.

2 Repeat step 1 to enter up to nine Marker points on a

disc.

To Recall a Marked Scene 1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

2 Within 10 seconds, use 1/2 or number button to

select a Marker number that you want to recall.

3 Press ENTER.

Playback will start from the Marked scene.

4 To remove the MARKER SEARCH menu, press

SEARCH.

To Clear a Marked Scene 1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

2 Within 10 seconds, use 1/2 or number button to

select a Marker number that you want to erase.

3 Press CLEAR.

The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker

numbers.

5 To remove the MARKER SEARCH menu, press

SEARCH.



All markers are erased when the disc is ejected.

Changing Video Mode



With certain discs, the playback picture may be flick-

ering or Dot Crawl is shown on straight lines. That

means Vertical interpolation or De-interlace is not

perfectly matched with the disc. In this case, the

picture quality may be improved by changing the

video mode.



To change the video mode, press and hold

DISPLAY about 3 seconds during disc playback. The

new video mode number selected is displayed on the

TV screen. Check whether the video quality has

improved. If not, repeat the above procedure until pic-

ture quality is improved.



Video mode sequence:

MODE1 → MODE2 → MODE3 → MODE1



If you turn off the power, the video mode will return to

initial default state (MODE1).

Detailed Description of each Video Mode

MODE1 : The source material of the DVD video (film material

or video material) is determined from disc information.

MODE2 : Suitable for playing film based content or video

based material recorded by the progressive scan method.

MODE3 : Suitable for playing video based content with

comparatively little motion.

ote

The video mode setting only works when the

Progressive Scan option is set to “On” in the Setup

menu.

Special DVD Features

Checking the contents of DVD Video discs: Menus

DVDs may contain menus that allow you to access spe-

cial features. To use the disc menu, press DISC MENU.

Then, press the appropriate number button to select an

option. Or, use b/B/v/V buttons to highlight your selec-

tion, then press ENTER.

Title Menu

1 Press TITLE.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

3 To remove the title menu, press TITLE again.

Disc Menu

1 Press DISC MENU.

The disc menu is displayed.

2 To remove the disc menu, press DISC MENU again.

Camera Angle

If the disc contains sequences recorded from different

camera angles, the angle icon blinks on the TV screen.

You can then change the camera angle if you wish.



Press ANGLE repeatedly during playback to select a

desired angle.

The number of the current angle appears on the display.

Changing the Audio Language

Press AUDIO repeatedly during playback to hear a

different audio language or audio track.

Subtitles

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

ote

If appears, the feature at that moment or with that

specific DVD.

DVD

1/9

MARKER SEARCH

1 ENG

5.1 CH

ABC

1 /1

1 ENG

Page 30

Audio CD and MP3/WMA Disc Operation

Playing Audio CDs and

MP3/WMA

Discs

The DVD+VCR can play MP3/WMA formatted record-

ings on CD-ROM, CD-R or CD-RW discs.

Before playing MP3/WMA recordings, read the notes on

MP3/WMA Recordings on right.

Insert a disc and close the tray. Audio CD; Audio CD menu appears on the TV

screen go to step 4.

MP3/WMA disc; The MP3/WMA-JPEG choice

menu appears on the TV screen. Go to step 2

Use 33/44to select the MP3/WMA then press ENTER.

The MP3/WMA menu appears on the TV screen.

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

Use33/

to select a folder, and ENTER.

A list of files in the folder appears.

Use 33/44to select a track then press NN(PLAY) or ENTER.

Playback starts.

During playback, the current track’s elapsed playing

time will appear on the display window and menu.

Playback will stop at the end of the disc.

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

Audio CD Menu MP3/WMA Menu

If you are in a file list and want to return to the Folder

list, use the 33/44to highlight and press ENTER to

return to the previous menu screen.

To stop playback at any other time, press STOP (xx).

MP3/WMA Recording Notes

About MP3



An MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.



The player can not read an MP3 file that has a file

extension other than “.mp3”.

About WMA (Window Media Audio) Files



A WMA file is made using Microsoft audio

compression technology.



WMA (Windows Media Audio) offers double the audio

compression of the MP3 format.

MP3/WMA Disc compatibility with this player is limited as follows:

1. Sampling Frequency / only at 44.1kHz (MP3),

22.05 - 44.1kHz (WMA)

2. Bit rate / within 32 - 320kbps (MP3),

32 - 128kbps (WMA)

3. CD-R physical format should be “ISO 9660”

4. If you record MP3/WMA files using the software

which cannot create a FILE SYSTEM, for example

“Direct-CD” etc., it is impossible to playback

MP3/WMA files. We recommend that you use “Easy-

CD Creator”, which creates an ISO9660 file system.

5. A single session disc requires MP3/WMA files in the

first track. If there is no MP3/WMA file in the 1st

track, it cannot playback MP3/WMA files. If you wish

to playback MP3/WMA files, format all the data in

the disc or use a new one.

6. File names should be named using 8 letters or less

and must incorporate “.mp3” or “.wma” extension

e.g. “********.MP3” or “********.WMA”.

7. Do not use special letters such as “/ : * ? “ < > ” etc.

8. Total number of files on the disc should be less than

650.

This DVD+VCR requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 or WMA files). That require certain pre-existing

conditions (see above) to insure compatible playback.

Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

WMA

MP3CD

Program

STER. NORM.

0: 56: 18

TRACK01

TRACK02

TRACK03

TRACK04

TRACK05

TRACK06

TRACK07

TRACK08

Clear All

FILE 1

FILE 2 FILE 3 FILE 4 FILE 5 FILE 6 FILE 7 FILE 8

Program

MP3 WMA

OFF00:00

Clear All

JPEG

MP3 WMA

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

MP3 WMA

OFF00:00

Program

Clear All

Page 31

OPERATION

Audio CD and MP3/WMA Disc Operation (Continued)

Pause

1 Press PAUSE/STEP (X) during playback. 2 To return to playback, press N (PLAY) or press

PAUSE/STEP (X) again.

Selecting other Tracks



Press SKIP . or > briefly during playback to go

to the next track or to return to the beginning of the

current track.



Press SKIP . twice briefly to step back to the pre-

vious track.



For audio CDs, to go directly to any track, enter the

track number using the numbered buttons (0-9) dur-

ing playback.

Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appear on the menu screen.

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat icon and “ALL” appear on the menu screen.

3 To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appear on the menu screen.

1 Press and hold BACKWARD m or FORWARD M

for about two seconds during playback.

The player will now go into SEARCH mode.

2 Press and hold BACKWARD m or FORWARD M

repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8

(forward).

Search speed and direction are indicated on the menu

screen.

3 To exit SEARCH mode, press N (PLAY).

Random

1 Press RANDOM during playback or when playback

has stopped.

The unit automatically begins Random Playback and

“RAND.” appears on the menu screen.

2 To return to normal playback, press RANDOM repeat-

edly until “RAND.” disappears from the menu screen.

Repeat A-B

To repeat a sequence.

1 During disc playback, press A-B at your chosen start-

ing point.

The Repeat icon and “A* ” appears on the menu screen.

2 Press A-B again at your chosen end point.

The Repeat icon and “A B” appears on the menu screen,

and the sequence begins to play repeatedly.

3 To exit the sequence and return to normal play, press

A-B again.

The Repeat icon and “OFF” appears on the menu screen.

3D Surround

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

1 Press DISPLAY or AUDIO during playback.

2 Use b/B to select the sound icon.

The sound option will be highlighted.

3 Use v/V to select “NORM.”, or “3D SUR”.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT, or RIGHT).

WMA

MP3CD

WMA

MP3CD

WMA

MP3CD

WMA

MP3CD

WMA

MP3CD

Page 32

JPEG File Operation

Viewing JPEG Files on a Disc

This DVD+VCR can play discs with JPEG files and

Kodak Picture CDs. Before playing JPEG recordings,

read the Notes on JPEG Files on right.

Insert a disc and close the tray.

The MP3/WMA-JPEG selection menu appears on

the TV screen.

ote

No MP3-JPEG choice menu will be displayed for kodak

PICTURE CD. The JPEG menu will appear on the TV

screen.

Use 33/44to select the JPEG then press ENTER.

The JPEG menu appears on the TV screen.

Use33/

to select a folder, and ENTER.

A list of files in the folder appears.

Press RETURN to move to the MP3/WMA-JPEG

selection menu.

Tip

If you are in a file list and want to return to the Folder

list, use the 34 buttons on the remote to highlight

“

”

and press ENTER to return to the

previous menu screen.

If you want to view a particular file, use 33/44to highlight the file and press ENTER or

(PLAY).

Viewing the file proceeding starts.

During viewing a file, press RETURN to move to

the previous menu (JPEG menu).

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

Tip

There are three viewing Slide Speed options: Fast,

Normal, Slow, and Off. Use 1/2 to highlight the Slide Speed option then use 3/4 to select the speed you

want to use, and then press ENTER.

To stop viewing at any other time, press STOP (xx).

The JPEG menu appears.

Selecting other Files

Press SKIP . or > once while viewing a picture to

advance to the next file or to the previous file.

Still Picture

1 Press PAUSE/STEP (X) while showing a slide show.

The player will now go into PAUSE mode.

2 To return to the slide show, press N (PLAY) or press

PAUSE/STEP (X) again.

To flip the picture

Press 33/44while showing a picture to flip the

picture horizontally or a vertically.

To rotate picture

Press 1/2 while showing a picture to rotate the

picture clockwise or counter clockwise.

Notes on JPEG Files



Depending upon the size and number of the JPEG

files, it could take a long time for the DVD player to

read the disc’s contents. If you don’t see an on-

screen display after several minutes, some of the files

are too big — reduce the resolution of the JPEG files

to less than 2 mega pixels and burn another disc.



Total number of files and folders on the disc should

be less than 650.



Some disc may be incompatible due to different

recording format or condition of disc.

 When you are using software such as “Easy CD

Creator” to burn the jpeg files into the CD-R, ensure

that all the selected files have the “.jpg” extensions

when copying into the CD layout.

 If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” files.

 File names without “.jpg” extension will not be able to

be read by this DVD+VCR. Even though the files are

shown as JPEG image files in windows explorer.

JPEG

Slide Speed

5/32 1024X768

Picture1

Picture2

Picture3

Picture4

Picture5

Picture6

Picture7

JPEG

Off

Folder1

MP3 WMA

JPEG

5/32 Picture5.jpg1024X768

Slide Speed

Off

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

JPEG

Page 33

OPERATION

Programmed Playback

WMA

MP3CD

Programmed Playback with Audio CDs and MP3/WMA Discs

The Program function enables you to store your favorite

tracks from any disc in the player memory.

Program can contain 30 tracks.

Press PROGRAM during playback or in the Stop mode to enter the Program Edit mode.

The mark will appear to the right of the word Program

on the right side of the menu screen.

ote

Press PROGRAM to exit the Program Edit mode;

the mark will disappear.

Select a track, then press ENTER to place the selected track on the Program list.

Repeat step 2 to place additional tracks on the Program list.

Audio CD Menu MP3/WMA Menu

Press 2.

The programmed track you selected last is highlighted on

the program list.

Use

33/44

to select the track you want to start

playing.

Press TITLE to move to the next page.

Press DISC MENU to move to the previous page.

Press NN(PLAY) to start.

Playback begins in the order in which you programmed

the tracks and “PROG.” appears on the menu screen.

Playback stops after all of the tracks on the Program list

have played once.

To resume normal playback from programmed playback, press PROGRAM. Select a track of CD (or MP3/WMA) list and then press ENTER.

“PROG.” indicator disappears from the menu screen.

Repeat Programmed Tracks



To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appear on the menu screen.



To repeat all tracks on the program list, press

REPEAT a second time.

The Repeat icon and “ALL” appear on the menu screen.



To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appear on the menu screen.

Erasing a Track from the Program List

1 Press PROGRAM during playback or in the Stop

mode to enter the Program Edit mode.

The mark will appear.

2 Press 2 to move to the Program list. 3 Use

33/44

to select the track that you wish to erase

from the Program list.

4 Press CLEAR.

The track will be erased from the Program list.

Erasing the Complete Program List

1 Follow steps 1-2 of “Erasing a Track from the

Program List” shown above.

2 Use

33/44

to select “Clear All”, then press ENTER.

The complete Program for the disc will be erased.

The programs are also cleared if the disc is ejected.

MP3 WMA

Clear All

FILE 1 FILE 2

FILE 3

FILE 4 FILE 5 FILE 6 FILE 7 FILE 8

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

0: 56: 18

Program

TRACK 12

TRACK 8

TRACK 10

TRACK 3

STER. NORM.

Program

FILE 8

FILE 2

FILE 4

FILE 3

Clear All

OFF00:00

Page 34

Controlling Your TV with the Supplied Remote

You can control the sound level, input source, and

power switch of your LG TV with the supplied remote.

You can control your TV using the buttons below.

By pressing You can

POWER Turn the TV on or off.

INPUT Switch the TV’s input source

between the TV and other input

sources.

CH +/– Scans up or down through

memorized channels.

VOL +/– Adjust the volume of the TV.

MUTE Turns on or off TV sound.

ote

Depending on the unit being connected, you may not be

able to control your TV using some of the buttons.

Controlling other TVs with the remote

You can control the sound level, input source, and

power switch of non-LG TVs as well. If your TV is listed

in the table below, set the appropriate manufacturer

code.

1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table below).

2. Release TV POWER button.

Code numbers of controllable TVs

If more than one code number is listed, try entering

them one at a time until you find the one that works with

your TV.

Manufacturer Code Number

LG / GoldStar 1 (Default), 2

Zenith 1, 3, 4

Samsung 6, 7

Sony 8, 9

Hitachi 4

otes



Depending on your TV, some or all buttons may not

function on the TV, even after entering the correct

manufacturer code.



If you enter a new code number, the code number

previously entered will be erased.



When you replace the batteries of the remote, the

code number you have set may be reset to the

default setting. Set the appropriate code number

again.

TV Control Buttons

Page 35

Troubleshooting

REFERENCE

Symptom

No power.

The power is on, but

the DVD+VCR does not

work.

No picture.

No sound.

The playback picture is

poor.

The DVD+VCR does

not start playback.

The remote control

does not work properly.

Cause

 The power cord is disconnected.

 No disc is inserted.

 No tape is inserted.

 The TV is not set to receive DVD+VCR

signal output.

 TV/VCR mode for DVD+VCR is set to

TV.

 The video cable is not connected

securely.

 The connected TV power is turned off.

 The equipment connected with the

audio cable is not set to receive

DVD+VCR signal output.

 The audio cables are not connected

securely.

 The power of the equipment connected

with the audio cables is turned off.

 The Digital Audio Output is set to the

wrong position.

 The disc is dirty.

 Tape heads are dirty.

 Tape is a rental or was recorded on

another VCR.

 No disc is inserted.

 No tape is inserted.

 An unplayable disc is inserted.

 The disc is placed upside down.

 The disc is not placed within the guide.

 The disc is dirty.

 The Rating level is set.

 The remote control is not pointed at the

remote sensor of the DVD+VCR.

 The remote control is too far from the

DVD+VCR.

 There is an obstacle in the path of the

remote control and the DVD+VCR.

 The batteries in the remote control are

dead.

 This remote control uses the same

buttons for VCR and DVD functions

(ex. PLAY).

Correction

 Plug the power cord into the wall outlet

securely.

 Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

 Select the appropriate video input mode

on the TV so the picture from the

DVD+VCR appears on the TV screen.

 Press the TV/VCR button on the remote

control repeatedly to choose VCR

mode. TV indicator disappears from the

display window.

 Connect the video cable securely.

 Turn on the TV.

 Select the correct input mode on the

audio receiver so you can listen to the

sound from the DVD+VCR.

 Connect the audio cables securely.

 Turn on the equipment connected with

the audio cables.

 Set the Digital Audio Output to the

correct position, then turn on the

DVD+VCR again by pressing POWER.

 Clean the disc.

 Clean video heads.

 Use CH/TRK (

v/V

) for manual tracking

adjustment while tape is playing.

 Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

 Insert a playable disc. (Check the disc

type, color system, and Regional code.)



Place the disc with the playback side down.

 Place the disc on the disc tray correctly

inside the guide.

 Clean the disc.

 Cancel the Rating function or change

the rating level.

 Point the remote control at the remote

sensor of the DVD+VCR.

 Operate the remote control within 23 ft

(7 m).

 Remove the obstacle.

 Replace the batteries with new ones.

 When using a VCR, first press the VCR

button. When using a DVD, first press

the DVD button.

Check the following guide for the possible cause of a problem before contacting service.

Page 36

Symptom

Some channels are

skipped over when

using CH/TRK (

v/V

)

Picture and sound of

broadcasting channel

are weak or missing.

Camcorder image is not

shown.

Camcorder image via

A/V input to DVD+VCR

is not shown on TV

screen.

Timer recording is not

possible.

indicator

appears

after DVD+VCR is turned

off.

Stereo Audio Record

and/or Playback is not

present.

Cause

 Those channels were deleted with the

CH. ADD/DEL option.

 Antenna or cables are loose.

 Wrong TUNING BAND option is being

used.

 Camcorder is off.

 DVD+VCR SOURCE SELECT is not set

to LINE1 or LINE2.

 Clock in DVD+VCR is not set to correct

time.

 Timer has been programmed

incorrectly.

 indicator does not appear after pro-

gramming timer.

 DVD+VCR is in Timer Recording mode.

 TV is not Stereo-compatible.

 Broadcast program is not in stereo for-

mat.

 DVD+VCR A/V Out jacks are not con-

nected to TV A/V In jacks.

 DVD+VCR Audio/Video Out is not

selected for viewing at the TV.

 DVD+VCR BROADCAST TYPE mode is

set to SAP or MONO.

Correction

 Use CH. ADD/DEL. to restore channels.

See “Channel Selection” on page 15.

 Tighten connections or replace cable.

 Try all TUNING BAND options. See

“Channel Selection” on page 15 for

details.

 Turn camcorder on and operate

properly.

 Press INPUT to select LINE input

channel (LINE1 or LINE2).

 Set clock to correct time. See “Setting

the Clock” on page 16.

 Reprogram Timer. See “Timer

Recording” on pages 22 and 23.

 Reprogram Timer.

 This is the normal indication that the

DVD+VCR is in TIMER mode.

 No action is possible.

 Make A/V connections. Stereo is

available only via A/V output from

DVD+VCR.

 Select AUX or A/V source as TV input.

 Set BROADCAST TYPE mode to

STEREO. See “VCR Setup Menu

Options” on page 15.

Moisture Condensation

Moisture condensation can occur:

• When the DVD+VCR is moved from a cold place to a

warm place.

• Under extremely humid conditions.

In locations where moisture condensation may occur:

•

Keep the DVD+VCR plugged into an AC power outlet

with POWER On. This will help prevent condensation.

• When condensation has occurred, wait a few hours

for the DVD+VCR to dry before using it.

Troubleshooting (Continued)

Page 37

REFERENCE

Language Code List

Language Code

Abkhazian 6566

Afar 6565

Afrikaans 6570

Albanian 8381

Amharic 6577

Arabic 6582

Armenian 7289

Assamese 6583

Aymara 6588

Azerbaijani 6590

Bashkir 6665

Basque 6985

Bengali; Bangla 6678

Bhutani 6890

Bihari 6672

Breton 6682

Bulgarian 6671

Burmese 7789

Byelorussian 6669

Cambodian 7577

Catalan 6765

Chinese 9072

Corsican 6779

Croatian 7282

Czech 6783

Danish 6865

Dutch 7876

English 6978

Esperanto 6979

Estonian 6984

Faeroese 7079

Language Code

Fiji 7074

Finnish 7073

French 7082

Frisian 7089

Galician 7176

Georgian 7565

German 6869

Greek 6976

Greenlandic 7576

Guarani 7178

Gujarati 7185

Hausa 7265

Hebrew 7387

Hindi 7273

Hungarian 7285

Icelandic 7383

Indonesian 7378

Interlingua 7365

Irish 7165

Italian 7384

Japanese 7465

Javanese 7487

Kannada 7578

Kashmiri 7583

Kazakh 7575

Kirghiz 7589

Korean 7579

Kurdish 7585

Laothian 7679

Latin 7665

Latvian, Lettish 7686

Language Code

Lingala 7678

Lithuanian 7684

Macedonian 7775

Malagasy 7771

Malay 7783

Malayalam 7776

Maltese 7784

Maori 7773

Marathi 7782

Moldavian 7779

Mongolian 7778

Nauru 7865

Nepali 7869

Norwegian 7879

Oriya 7982

Panjabi 8065

Pashto, Pushto 8083

Persian 7065

Polish 8076

Portuguese 8084

Quechua 8185

Rhaeto-Romance 8277

Romanian 8279

Russian 8285

Samoan 8377

Sanskrit 8365

Scots Gaelic 7168

Serbian 8382

Serbo-Croatian 8372

Shona 8378

Sindhi 8368

Language Code

Singhalese 8373

Slovak 8375

Slovenian 8376

Somali 8379

Spanish 6983

Sudanese 8385

Swahili 8387

Swedish 8386

Tagalog 8476

Tajik 8471

Tamil 8465

Tatar 8484

Telugu 8469

Thai 8472

Tibetan 6679

Tigrinya 8473

Tonga 8479

Turkish 8482

Turkmen 8475

Twi 8487

Ukrainian 8575

Urdu 8582

Uzbek 8590

Vietnamese 8673

Volapük 8679

Welsh 6789

Wolof 8779

Xhosa 8872

Yiddish 7473

Yoruba 8979

Zulu 9085

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 18).

Page 38

Code Country

AD Andorra

AE United Arab Emirates

AF Afghanistan

AG Antigua and Barbuda

AI Anguilla

AL Albania

AM Armenia

AN Netherlands Antilles

AO Angola

AQ Antarctica

AR Argentina

AS American Samoa

AT Austria

AU Australia

AW Aruba

AZ Azerbaidjan

BA Bosnia-Herzegovina

BB Barbados

BD Bangladesh

BE Belgium

BF Burkina Faso

BG Bulgaria

BH Bahrain

BI Burundi

BJ Benin

BM Bermuda

BN Brunei Darussalam

BO Bolivia

BR Brazil

BS Bahamas

BT Bhutan

BV Bouvet Island

BW Botswana

BY Belarus

BZ Belize

CA Canada

CC Cocos (Keeling) Islands

CF Central African Republic

CG Congo

CH Switzerland

CI Ivory Coast

CK Cook Islands

CL Chile

CM Cameroon

CN China

CO Colombia

CR Costa Rica

CS Former Czechoslovakia

CU Cuba

CV Cape Verde

CX Christmas Island

CY Cyprus

CZ Czech Republic

DE Germany

DJ Djibouti

DK Denmark

DM Dominica

DO Dominican Republic

DZ Algeria

EC Ecuador

EE Estonia

EG Egypt

EH Western Sahara

Code Country

ER Eritrea

ES Spain

ET Ethiopia

FI Finland

FJ Fiji

FK Falkland Islands

FM Micronesia

FO Faroe Islands

FR France

FX France (European

Territory)

GA Gabon

GB Great Britain

GD Grenada

GE Georgia

GF French Guyana

GH Ghana

GI Gibraltar

GL Greenland

GM Gambia

GN Guinea

GP Guadeloupe (French)

GQ Equatorial Guinea

GR Greece

GS S. Georgia & S. Sandwich

Isls.

GT Guatemala

GU Guam (USA)

GW Guinea Bissau

GY Guyana

HK Hong Kong

HM Heard and McDonald

Islands

HN Honduras

HR Croatia

HT Haiti

HU Hungary

ID Indonesia

IE Ireland

IL Israel

IN India

IO British Indian Ocean

Territory

IQ Iraq

IR Iran

IS Iceland

IT Italy

JM Jamaica

JO Jordan

JP Japan

KE Kenya

KG Kyrgyzstan

KH Cambodia6

KI Kiribati

KM Comoros

Saint Kitts & Nevis Anguilla

KP North Korea

KR South Korea

KW Kuwait

KY Cayman Islands

KZ Kazakhstan

LA Laos

LB Lebanon

Code Country

LC Saint Lucia

LI Liechtenstein

LK Sri Lanka

LR Liberia

LS Lesotho

LT Lithuania

LU Luxembourg

LV Latvia

LY Libya

MA Morocco

MC Monaco

MD Moldavia

MG Madagascar

MH Marshall Islands

MK Macedonia

ML Mali

MM Myanmar

MN Mongolia

MO Macau

MP Northern Mariana Islands

MQ Martinique (French)

MR Mauritania

MS Montserrat

MT Malta

MU Mauritius

MV Maldives

MW Malawi

MX Mexico

MY Malaysia

MZ Mozambique

NA Namibia

NC New Caledonia (French)

NE Niger

NF Norfolk Island

NG Nigeria

NI Nicaragua

NL Netherlands

NO Norway

NP Nepal

NR Nauru

NU Niue

NZ New Zealand

OM Oman

PA Panama

PE Peru

PF Polynesia (French)

PG Papua New Guinea

PH Philippines

PK Pakistan

PL Poland

PM Saint Pierre and Miquelon

PN Pitcairn Island

PR Puerto Rico

PT Portugal

PW Palau

PY Paraguay

QA Qatar

RE Reunion (French)

RO Romania

RU Russian Federation

RW Rwanda

SA Saudi Arabia

SB Solomon Islands

Code Country

SC Seychelles

SD Sudan

SE Sweden

SG Singapore

SH Saint Helena

SI Slovenia

SJ Svalbard and Jan Mayen

Islands

SK Slovak Republic

SL Sierra Leone

SM San Marino

SN Senegal

SO Somalia

SR Suriname

ST Saint Tome and Principe

SU Former USSR

SV El Salvador

SY Syria

SZ Swaziland

TC Turks and Caicos Islands

TD Chad

TF French Southern

Territories

TG Togo

TH Thailand

TJ Tadjikistan

TK Tokelau

TM Turkmenistan

TN Tunisia

TO Tonga

TP East Timor

TR Turkey

TT Trinidad and Tobago

TV Tuvalu

TW Taiwan

TZ Tanzania

UA Ukraine

UG Uganda

UK United Kingdom

UM USA Minor Outlying

Islands

US United States

UY Uruguay

UZ Uzbekistan

VA Vatican City State

VC Saint Vincent &

Grenadines

VE Venezuela

VG Virgin Islands (British)

VI Virgin Islands (USA)

VN Vietnam

VU Vanuatu

WF Wallis and Futuna Islands

WS Samoa

YE Yemen

YT Mayotte

YU Yugoslavia

ZA South Africa

ZM Zambia

ZR Zaire

ZW Zimbabwe

Enter the appropriate code number for the initial setting “Country Code” (See page 20).

Country Code List

Page 39

Specifications

REFERENCE

General

Power requirements AC 120V, 60 Hz

Power consumption 19W

Dimensions (approx.) 16.9" X 3.1" X 10.8" (430 X 78.5 X 273 mm) (w x h x d)

Weight (approx.) 8.82 lbs (4.0 kg)

Operating temperature 5˚C to 40˚C (41˚F to 104˚F)

Operating humidity 5 % to 90 %

Signal system NTSC

Inputs

Page 40

LG will repair or replace your product, at LG’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS, IN CONNECTION WITH THE PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR -238.2(L0So(W)91.(TY)-238.O NOT)-202.3PPL(W)91.(TY)-223.8(T)17.7 YOU.UT

Zenith XBV 443 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual