Zenith TVSC0902 Owner’s Manual
Operating Guide
& Warranty
"04.040°,°0°,0,0,0,0010°°00°=°'°°0°0"'°_
._°*°1°.°.,0,01.0=.00°*°*°*0=0.°=. "
.,0,°_==0, ....... 0'°0'0.00.0'°.,
*,_0_°,,0,.,o.,'.°.° .... ,o,.
.,,,,* ........ 0.,*,,.
9" Color TV/VCR Combination
TVSC0902
TABLE OF CONTENTS
BIMPORTANTSAFEGUARDS ................ 3
• SPECIFICATIONS .' '_..._.5
• SUPPLIED ACCESSORIES ................. 5
• PRECAUTIONS ..... _..._ ................. 6
Location .................................. 6
Avoidthe Hazards ofElectricalShoekand Fire...6
CAUTION " ...6
• FEATURES ................... , ....... _ ...7
• VIDEO CASSETTE ............. . ............. 8
• OPERATING CONTROLS AND FUNCTIONS .... 9
• PREPARATION FOR USE .................. 11
Antenna/Cable Connections ................. 11
Mobile Connection ........................ 12
Installing the Batteries ..................... 13
External Input Mode ....................... 13
• SET UP FOR USE ........................ 14
Channel Set Up for the First Time ............ 14
Deleting (or Adding) Channel ............... 14
Channel Set Up Again ..................... 15
Selecting the Language .................... 15
Daylight-Saving "13me ...................... 15
Clock Set Up (Auto / Manual) ................ 16
n ON-SCREEN DISPLAY .................... 18
• SPECIAL FEATURES ..................... 18
Degaussing ............................. 18
Real Time Tape Counter .................... 18
Auto Rewind-Eject ........................ 18
II TV OPERATION ......................... 19
Watching a TV Program .................... 19
Game Mode ............................. 19
Picture Control ........................... 19
• PLAYBACK ............................. 20
Normal Playback ......................... 20
Tracking Adjustment ....................... 20
Picture Search ........................... 20
Still Picture .............................. 20
Noise line Reduction (in the Still mode) ........ 20
Vertical Hold Control ....................... 20
• SPECIAL PLAYBACK ..................... 21
Rental Playback .......................... 21
Auto Repeat Playback ..................... 21
• SEARCH ............................... 22
Zero Return ............................. 22
Time Search ............................. 22
• RECORDING ............................ 23
Normal Recording ........................ 23
Skipping Unwanted
Scenes During Recording ................... 23
OTR (One Touch Recording) ................ 24
Copying a Video Cassette
(Requires a VCR or camcorder) .............. 24
• TIMER ................................. 25
Automatic Timer Recording ................. 25
Timer Program Extension ................... 26
Auto Return ............................. 27
Wake Up Timer .......................... 28
Sleep Timer ............................. 28
• MAINTENANCE .......................... 29
• TROUBLESHOOTING GUIDE ............... 30
FULL 90 DAY WARRANTY
For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in
this TV/VCR combination, free of charge. For one year from the date of purchase, Sears will supply,
at no charge, replacement for defective parts.
The above warranty coverage applies only to TV/VCR combinations which are used for private
household purposes.
TO OBTAIN WARRANTY SERVICE, SIMPLY RETURN THE TV/VCR COMBINATION TO THE
NEAREST SEARS SERVICE CENTER IN THE UNITED STATES.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Sears Roebuck and Co., Dept. 817WA Hoffman Estates, IL 60179
For the location of a Sears Service Center in your area : 1-600-488-1222
-2- EN
9K16
WARNING: To reduce the risk of fireor electric shock, do not expose this appliance to rain or moisture, 1
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
The aboveCAUTIONislocatedon the backofthe TVNCR cabinet.
CAUTION: To reduce the risk of electric shock, do
not remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying the appliance.
IMPORTANT SAFEGUARDS
1. Read instructions-Read all safety and operating
instructions before operating this appliance.
2. Save Instructions-Save these safety and
operating instructions for future reference.
3. Heed Warnings-Adhere to all warnings and
cautions on the appliance and in this operating
guide.
4. Follow Instructions-Follow all safety and
operation instructions.
5. Cleaning-Unplug TV/VCR from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments-Do not use attachments not
recommended by the TVNCR manufacturer as
they may cause hazards.
7.Water and Moisture-Do not use this TVNCR near
water, for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, and the like.
8. Accessories-Do not place this TVNCR on an
unstable cart, stand, tripod, bracket, or table. The
TVNCR may fall, causing serious injury to
someone, and serious damage to the appliance.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the TVNCR. Any mounting of the appliance should
follow the manufacturer's instructions and should
use a mounting accessory recommended by the
manufacturer. An appliance and cart combination
should be moved with care.
Quick stops, excessive force, and uneven surfaces
may cause the appliance and
cart combination to overturn.
PORTABLE CART WARNING
9. Ventilation-There are slots and openings in the
TV/VCR cabinet to provide ventilation and protect it
from overheating These openings must not be
blocked or covered. Do not place the TVNCR on
a bed, sofa, rug, or similar surface that will cause
the ventilation openings to be blocked. Never place
the TV/VCR near or over a radiator or heat register.
Never place the TVNCR in a built-in installation
such as a bookcase or rack unless proper
ventilation space is provided for it according to the
instructions in this owner's manual,
10. Power Sources-This TVNCR should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your appliance
dealer or local power company. For TVNCRs
intended to operate from battery power, or other
sources, refer to the operating instructions.
11. Grounding or Polarization-This TVNCR is
equipped with a polarized alternating-current line
plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
12. Power-Cord Protection-Route power supply cords
so that they are not likely to be walked on or
pinched by items placed on or against them. Take
special care to keep all TV/VCR plug and cord-exit
points clear of contact with other items.
-3- EN
9K16
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
LEAPlN
WIRE
ANTENNA
DISCHARGE UNIT
{N£C SECTION 810-20)
(NEC SECTION B10 21)
NEC NATIONAL ELECTRICAL CODE
S2898A
13.Outdoor Antenna grounding-If an outside
antenna or cable system is connected to the
TVNCR, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No.
70, provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. (Fig. A)
14.Lightning-During a lightning storm, or before
leaving it unattended and unused for a long period
of time, unplug the TV/VCR from the wall outlet,
and disconnect the antenna or cable system. This
will prevent damage to the TVNCR from lightning
and power-surges.
1&Power Lines-An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching power lines
or circuits, as contact with them might be fatal.
16.Overloading-Do not overload wall outlets and
extension cords as this can result in a risk of fire or
electric shock.
17.Object and Liquid Entry-Never push objects of
any kind into this TVNCR through openings as they
may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV/VCR
18.Servicing-Do not attempt to service this TV/VCR
yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
#___ POWER SERVICE GROUNDING
ELECTRODE SYSTEM
LNEC ART 250 pART H)
19.Damage Requiring Service-Unplug this TVNCR
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a.When the power-supply cord or plug is damaged
or frayed.
b. If liquid has been spilled, or objects have fallen
into the TVNCR.
c. If the TVNCR has been exposed to rain or water.
d.lf the TV/VCR does net operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the TV/VCR to its normal operation.
e.lf the TV/VCR has been dropped or damaged in
any way.
f. When the TV/VCR exhibits a distinct change in
performance it needs to be serviced.
20.Replacement Parts-When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer
that have the same characteristics as the original
part. Unauthorized substitutions may result in fire,
electric shock, injury to persons or other hazards.
21.Safety Check-Upon completion of any service or
repairs to this TV/VCR, ask the service technician
to perform routine safety checks to determine that
the TV/VCR is in proper operating condition.
22.Heat- This TVNCR product should be situated
away from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
- 4 - EN
9K16
The serial number of this product is found on the back of the unit. Record the serial number and other
vital information here and retain this book as a permanent record of your purchase to aid identification
in case of theft.
Date of Purchase
Store Address
Store Phone Number
Model Number
Serial Number
SPECIFICATIONS
GENERAL SPEC_FtCA"iqONS
CRT : 9 inch in-line gun, 90 ° deflection tube
Television system : NTSC-M
Video Heads : Rotary two-head
Tape width : 1/2 inch
Tape speed
SP : 33.40mm/sec.
LP : 16.67mm/sec.
SLP : 11.12mm/sec.
Tuner channel
TV VHF Low : #2-#6
TV VHF High : #7-#13
TV UHF : #14-#69
CATV
VHF : 5A
MID band : A5-A1, A-I
SUPER band : J-W
HYPER band : W+I-W+84
Terminals
Antenna input : VHF/UHF 75 ohms
unbalanced
Video input : RCA connector × 1
Audio input : RCA connector x 1
Earphone : 1/8" monaural (3.5 mm)
£[_C[Ri A_SPECtFICAItONS
Video input level : 0.5-2.0Vp-p
Audio input level : -15dBs
Video S/N ratio : More than 46dB
Audio S/N ratio : More than 43dB
OTHER PECIFICATIONS
Power requirement : AC 120V/60Hz
DC 13.2V
Power consumption : AC/DC 60W
Dimensions : H:13" (330mm)
W:12-1/8" (3O8mm)
D:12-15/16" (329mm)
Weight 18.7 Ibs (8.5 kg)
• Designs and specifications are subject to
change without notice and without our legal
obligation.
_As an ENERGYSTAR®
determined that this product meets
the ENERGYSTAR® guidelines for
energy efficiency. ENERGYSTAR® is
a U.S. registered mark.
Partner, Sears has
SUPPLIED ACCESSORIES
• Remote Control - Part No. N0118UD
• Dipole Antenna
• Matching Adapter
• Two(2) AA Batteries
• Car Adapter Cord
• AC Cord
• To order a replacement Remote Control, call 1-800-366-7278.
-5- EN
9K16
PRECAUTIONS
For safe operation and satisfactory performance
of your TV/VCR, keep the following in mind when
selecting a place for its installation:
• Shield it from direct sunlight and keep it away
from sources of intense heat.
• Avoid dusty or humid places.
• For proper heat dissipation, avoid places with
insufficient ventilation. Do not block the
ventilation holes at the top and bottom of the
unit. Do not prace the unit on a carpet because
this will block the ventilation holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the TVNCR near strong magnetic
fields.
• Avoid moving TV/VCR to locations where
temperature differences are extreme.
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when
disconnecting it from an AC wall outlet. Grasp it
by the plug.
• If, by accident, water is spilled on your unit,
unplug the power cord immediately and take
the unit to Sears Service Center for servicing.
• Do not put your fingers or objects into the
TVNCR cassette holder.
• Do not place anything directly on top of the unit.
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm
place, or after heating a cold room or under
conditions of high humidity. If a tape is played in a
TV/VCR which has moisture, it may damage the
tape and TV/VCR. Therefore when you suspect
that condensation has occurred inside the unit, or
if "DEW" appears on the screen, turn the POWER
button ON and allow at least 2 hours for the unit
to dry out.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized recording or use of broadcast
television programming, video tape, film or
other copyrighted material may violate
applicable copyright laws. Sears assumes no
responsibility for unauthorized duplication, use,
or other acts which infringe upon the rights of
copyright owners.
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to
this equipment may cause harmful interference
unless the modifications are expressly
approved in the instruction manual. Do not
operate this equipment if an unauthorized
change or modification is made.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the
equipment and receiver.
3) Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
4) Consult the dealer or an experienced
radio/TV technician for help.
A NOTE ABOUT RECYCLING
This product's packaging materials are recycrable and can be reused. Please dispose of any
materials in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
- 6 - EN
9K16
FEATURES
• Infrared remote control
• Bilingual on-screen menu display selectable
in English or Spanish
• Real time counter-
This shows the elapsed recording or playback
time in hours, minutes, and seconds.
The "-" indication will appear when the tape is
rewound further than the tape counter position
"0:00:00".
• 181 channel capability PLL frequency
synthesizer tuner with direct station call-
A converter may be necessary to view
scrambled cable channels.
• Auto Clock Setting-
Allows you to set the clock function from a PBS
broadcast station.
• Game mode-
Automatically sets external input mode and
allows TV/VCR display to be suitable for use
with TV games.
• Auto power on and off system-
Automatically turns on the TVNCR when you
insert the cassette, turns off after auto-rewind,
and ejects when the beginning of the tape is
reached.
• Auto rewind when the end of a tape is
reached-
This function doesn't occur when using timer
recording.
• Three different playback tape speeds :
SP/LP/SLP
• Two different recording tape speeds
SP/SLP
• 2 Step picture search operation-
You can view a video program at high speed or
super high speed in either a forward or reverse
direction in LP and SLP mode. High speed only
in SP mode.
• Dew sensor-
Indicates that moisture condensation may have
occurred inside the TV/VCR.
• Zero Return-
The tape returns to counter of 0:00:00 by
rewinding or fast-forwarding.
• Still-
"Freeze" the picture at any time, for close
viewing of a particular scene. Only tapes
recorded in SLP mode will show a fairly clear
picture.
• Digital Auto Tracking (DTR)-
Automatically adjusts the tracking for each tape
you play.
• Rental play mode-
Improves playback picture quality from worn
tapes, such as rental tapes.
• Auto repeat-
Allows you to repeat a tape indefinitely without
pressing the PLAY button.
• Time search-
Let you set the TVNCR to advance the tape by
entering the desired playback time you want to
skip.
• OTR (One Touch Recording)-
Instant timed recording from 30 to 480 minutes
is possible at the push of the REC/OTR button.
• 1 Year, 8 events (including Daily and Weekly
Timer Recording)-
The built-in timer allows you to record up to 8
programs at different times on different channels
up to 1 year in advance. The Daily timer allows
recordings to be made of daily broadcasts, and
the Weekly timer allows recording to be made
once a week up to the end of the tape.
• Auto return-
After timer recording is finished, the TV/VCR
can return to the beginning of the recording.
• Wake up/Sleep timer-
Allows you to have the TVNCR automatically
turn on or off at a desired time.
• Timer Program Extension-
Allows you to shift the time schedule for
automatic timer recording.
• Dual power-
Allows you to power TV/VCR with household AC
or with car battery.
-7- EN
9K16
VIDEO CASSETTE
This TV/VCR will operate with any cassette that has the VI-IS mark. For best results, we recommend
the use of high-quality tapes. Do not use poor quality or damaged tapes.
• Avoid moisture. Moisture condensation may
occur inside the unit when it is moved from a
cold place to a warm place, or after heating a
cold room or under conditions of high humidity.
If a tape is played in a TV/VCR which has
moisture, it may damage the tape and TV/VCR.
Therefore when you suspect that condensation
has occurred inside the unit. turn the POWER
button ON and allow at least 2 hours for the unit
to dry out.
• Avoid extreme heat, high humidity and
magnetic fields.
• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.
You may choose to record at two different tape
speeds:
• SP-Standard Play
• SLP- Super Long Play
The table below shows the maximum
recording/playback time using T60, T120 or T160
tapes in each mode.
Position cassette with the view-window facing up,
as pictured below. Insert cassette into cassette
slot by pushing in gently, but continuously, on the
center of the cassette back until cassette is drawn
into the TV/VCR.
Once cassette is fully inserted, the TV/VCR will
automatically turn on.
CORRECT fWRONG
1) With the TV/VCR in the Stop mode, press the
EJECT button on the remote control, or press
the STOP/EJECT button on the TVNCR. The
cassette will eject.
2) Pull the cassette out of the cassette
compartment.
3) Store the cassette in its case as shown.
Tape Speed Recording/Playback Time
_Type oftape T60 T120 T160
SP mode 1 hour 2 hours 2-2/3 hours
SLP mode 3 hours 6 hours 8 hours
NOTE: You can play back a tape recorded in LP
(Long Play) mode.
You can prevent accidental
erasing of recording by
breaking off the tab on the
back edge of the cassette.
_Tab
If you decide to record on
the tape again, cover the
hole with plastic tape.
! Transparent Tape
- 8 - EN
9K16
OPERATING CONTROLS AND FUNCTIONS
NOTES:
• We do not recommend that you use a "universal" remote control to operate this TV/VCR. Not all of
the functions may work. Call the manufacturer of the universal remote control, not Sears, if you have
problems with it.
• Depending on your antenna system, you may need other connectors in addition to the coaxial cable
supplied with this unit. See Antenna/Cable Connections section of this manual,
- TV/VCR FRONT PANEL -
_uo,o v,D_o
1 2
-- POWER STOP,EJ6CT_REW--pL_Y--FFWD_ECOTR V VOLUME _ CHANNEL _ARPHONE _
RECOROO #
34 5 6 7 8 9 10 11 12 1314
-REMOTE CONTROL-
25
5
6
24
15
16
17
12
11
23
7
6
10
18
22
21
19
20 .....
1 AUDIO input jack-
Connect to the audio output jack of your audio
equipment, video camera or another VCR.
2 VIDEO input jack-
Connect to the video output jack of your video
camera or another VCR.
3 RECORD indicator-
Flashes during recording.
Lights up in the Stand-by mode for Timer
Recording.
4 Remote Sensor Window-
Receives the infrared signals from the remote
control.
F
5 PWR(POWER) button-
Press to turn TV/VCR on and off. Press to
activate timer recording.
6 STOP button-
Press to stop the tape motion.
EJECT button-
Press in the Stop mode to remove tape from
TV/VCR.
Select the setting modes from the on-screen
menu. Press to enter digits when setting
program. (For example: Setting clock or timer
program)
7 REW button-
Press to rewind the tape, or to view the picture
rapidly in reverse during the PLAY mode.
Press to select a mode from a particular menu.
(For example: Language or user's set up)
8 PLAY button-
Press to start the PLAY mode.
Select the setting modes from the on-screen
menu. Press to enter digits when setting
program. (For example: Setting clock or timer
program)
9 F.FWD button-
Press to rapidly advance the tape, or to view
the picture rapidly in forward during playback
mode.
When setting program (For example: Setting
clock or timer program), press to determine
your selection and proceed to the next step you
want to input. Press to determine setting
modes from on-screen menu. Press to select a
mode from a particular menu. (For example:
Language or user's set up)
-9-
EN
9K16
10 REC(ORD) button-
Press for manual recording.
OTR button- Activates One Touch Recording.
(Only on the TV/VCR)
11 VOLUME +/-(UP/DOWN) buttons-
Adjust the volume level.
12 CHANNEL UP/DOWN buttons-
Press to select the desired channels for
viewing or recording.
TRACKING function- Press to minimize video
'noise' (lines or dots on screen) during
playback mode.
13 EARPHONE jack-
Connects to earphones (not supplied) for
personal listening. The size of jack is 1/8"
monaural (3.5mm).
14 Cassette slot-
Insert the cassette here.
15 Number buttons-
Press to select desired channels for viewing or
recording. To select channels from 1 to 9, first
press the 0 button and then 1 to 9.
100+ button- When selecting cable channels
which are higher than 99, press this button
first, then press the last two digits. (To select
channel 125, first press the "100+" button then
press "2" and "5").
16 MENU button-
Press to display the main menu on the TV
screen.
17 DISPLAY button-
Display the counter or the current channel
number and current time on the TV screen.
18 SPEED button-
Press to choose the desired recording speed:
SP/SLP.
19 T-PROG. CLEAR button-
Press to cancel a timer program setting.
(See page 27.)
COUNTER RESET button- Press to reset
counter to 0:00:00.
20 GAME button-
Sets the game mode and external input mode
at the same time.
21 TIME SEARCH button-
Press to activate 33me Search mode.
22 PAUSE/STILL button-
Press to temporarily stop the tape during the
recording or to view a still picture during
playback.
23 MUTE button-
Mutes the sound. Press it again to resume
sound.
24 CHANNEL RETURN button-
Press to go back to the previously viewed
channel. For example, pressing this button
once will change channel display from 3
(present channel) to 10 (previously viewed
channel), and pressing it a second time will
return from 10 to 3.
25 WAKE UP/SLEEP button-
Sets the Wake up or Sleep Timer.
26 ANT. terminal-
Connect to an antenna or cable system.
27 DC 13.2V jack-
Connect to the Car Adapter Cord.
28 AC 120V jack-
Connect to the AC cord.
- REAR VIEW -
27
28
26
- 10- EN
9K16
Loading...