Zenith LST 4200A Diagram

INTRODUCTION

Remote Control Key Functions

GUIDE

PG DN

PG UP

STB

Sets Remote Control to operate

the HDTV

Receiver

TV/INPUT

Selects the TV’s source (Tuner or AUX

A/V input).

ez ADD

Automatically adds new channels (digital)

available through the antenna input

except channels memorized and already

in the channel list.

Numbers

Chooses channels and enters program-

ming information.

Dash (-)

Enters a channel number for multiple pro-

gram channels such as 2-1, 2-2, etc.

MUTE

Tu r ns sound ON and OFF.

VOL (Volume) (+/–)

Sets sound level.

CH (Channel) (+/–), PG UP/DN

Selects channels in memory. Pressing the

PG UP/DN buttons pages through the

Program Guide or Channel Edit menu.

FLASHBK

Returns to the last channel viewed.

PROGRAM

Brings up the Program Guide.

STATION

Brings up the Station Guide.

DATE

Changes the date of the Program or

Station Guide when the Program or

Station Guide is displayed.

INFO

Shows the current station and program

information on the screen.

Accesses or closes main menu.

Component Control Buttons

Provides control for DVD players, VCRs,

and similar components.

Mode Indicator

Flashes with key presses to indicate mode.

MODE

Selects Remote Control operational mode.

POWER

Tu r ns the HDTV Receiver ON and OFF. This button is not functional.

AUDIO

Selects program’s audio language or analog audio options if available.

Selects caption mode if available.

SIGNAL

Shows the signal strength of the current channel.

SELECT ( )

Completes the channel number input and promptly tunes to selected channel.

RATIO

Changes the picture aspect ratio.

FREEZE

Freezes the current image. Pressing the button again returns the image to live video.

SURF ( )

Tunes to your surf channels or to scan the guide.

HELP (?)

You can see the help description of a menu option while that menu is displayed by pressing the HELP (?) button.

Arrow Buttons (33/ 44/ 11/ 22)

Selects options in a menu.

SELECT ( )

Completes the channel number input and promptly tunes to selected channel.

EXIT

Removes all on-screen displays and returns to TV viewing from any menu.

Remote Control Operation Range

Point the Remote Control at the remote sensor and press the buttons.



Distance: About 23 ft (7 m) from the front of the remote sensor.



Angle: About 30° in each direction of the front of the remote sensor.

Remote Control Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert two batteries (size AA) with and

matched correctly. Reinstall cover.

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

STB

TV VCR DVD AUX

STB

MODE

POWER

TV/INPUT

ez ADD

AUDIO CC SIGNAL

SELECT

PG UP

PG DN

FLASHBK MUTE

FREEZE SURF HELP

RATIO

PROGRAM

STATION

GUIDE

REFERENCE

Programming the Remote Control to Operate Other Devices

The HDTV Receiver Remote Control is a multi-brand or universal Remote Control that can be programmed to operate most remote-controllable devices from other manufacturers.

ote

The Remote Control may not be able to control all models of other brands.

Test your Remote Control.

To find out whether your Remote Control can operate a device without programming, turn on the device such as a VCR and select the corresponding mode (VCR) by pressing MODE on the Remote Control while pointing at the device. Use the POWER and CH +/– buttons to see if the device responds properly. If not, the Remote Control requires programming.

Turn on the device to be programmed.Then select the corresponding mode (VCR, AUX, TV, DVD or STB) by pressing MODE on the Remote Control.

Press the POWER button and the MUTE button simultaneously.

The Remote Control is now ready to program the code for the device.

There are two ways to find the correct code for the device. First, if you press the CH + buttons repeatedly, the codes will change

one at-a-time. If the right code is found, the device will turn off. Second, enter the code number using the number buttons on the Remote Control. The right code numbers for the corresponding device can be found on the following pages. If the code is correct, the device will turn off.

Press the EXIT button to store the programming code.

Test the Remote Control functions to see if the device responds properly. If not, repeat from step 2.

GUIDE

PG DN

PG UP

STB

TV VCR DVD AUX

MODE

POWER

TV/INPUT

ez ADD

AUDIO CC SIGNAL

SELECT

PG UP

PG DN

FLASHBK MUTE

FREEZE SURF HELP

RATIO

PROGRAM

STATION

GUIDE

+ 2 hidden pages