Zenitel CRM-V-DAK48 User Manual

UL Certified Intercom

1008010100

CRM-V-DAK48

48-Key DAK Expansion Module for CRM-V

DESCRIPTION

Extends IP Flush Master Station wit h 48 programmable DAK keys (direct access keys)
Ideal for control room applications
Visual indicat ions with two LEDs (green/ red) per DAK key
All keys have backlight (adjustable)
Easy labeling of keys

The IP DAK-48 Unit extends the IP Flush Master Station wit h DAK buttons and visual indicators (LEDs), providing the perfect solution for the control room.

Each DAK key is equipped with two programmable LED indicators, one red and one green. The LEDs can be used to show alarms, noti ficat ions, call requests , or any other
indication required from the system. This opens up for a wide range of integrations and applications such as :

Advanced call request handling with visual indications
CCTV and intercom integration
Dynamic group call and PA zone selection
Simplex (radio) conference with visual indications

The IP DAK-48 Unit i s eas y to install. The connection between the IP Flush Mast er and DAK module is completely transparent for the user. When connected, the DAK module
acts as an integral part of the IP Flush Master station, giving access to a l arge number of direct access keys wit h related LED indicators.

One or two DAK modules can easily be connected to one IP Flush Master, giving a total of 52/100 DAK keys. The module is powered ent irely from the IP Flush Master host ,
and requires no other connections. The IP Flush M aster can power up to 2 DAK modules regardless of its own power source (PoE or separate 24 VDC supply).

Created: 03.07.2014, updated: 11.01.2021 page 1/3

www.zenitel.com [e-mail]

Zenitel and its subsidiaries assume no responsibility for any error s that may appear in this publication, or for damages arising from the informatio n therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance
System is certi fied to meet t he requirements in NS-EN ISO 900 1. Zenitel reserves the right to mo dify designs and alter specifications without notice.

ZENIT EL PROPRIETARY. T his document and its supplementing elements, contain Zenitel or third party infor mation which is proprietary and confid ential. Any disclosure, co pying, distri bution or use is prohibited, if not otherwise explicitly agreed in
writing with Zenitel. Any authorized reprod uction, in part or in whole, must include this legend; Zenitel – All rights reserved.

SPECIFICATIONS

SPECIFICATIONS

Dimension (WxHxD): 125 x 280 x 30 mm

Weight 0.65 kg

Temperature range 0˚C to +55˚C

Power Powered over connection cable from IP Flush Master Station

Connectors RJ45, one in and one out

Backlight White backlight

Installation

RJ45 terminated cable between IP Flush Mast er S tation and DAK module. 2 modules can be daisy chained
(included)

Software All software for the DAK module is located in the IP Flush Mast er S tation

IP rating IP-32

Certificates UL 60950-1, cUL 60950-1, CB to IEC 60950-1

TECHNICAL DIMENSIONS

Created: 03.07.2014, updated: 11.01.2021 page 2/3

www.zenitel.com [e-mail]

Zenitel and its subsidiaries assume no responsibility for any error s that may appear in this publication, or for damages arising from the informatio n therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance
System is certi fied to meet t he requirements in NS-EN ISO 900 1. Zenitel reserves the right to mo dify designs and alter specifications without notice.

ZENIT EL PROPRIETARY. T his document and its supplementing elements, contain Zenitel or third party infor mation which is proprietary and confid ential. Any disclosure, co pying, distri bution or use is prohibited, if not otherwise explicitly agreed in
writing with Zenitel. Any authorized reprod uction, in part or in whole, must include this legend; Zenitel – All rights reserved.