Zenitel CL-200T-AG User Manual

2131000142

CL-200T-AG

Ceiling Loudspeaker with Steel Firedome for Humid Rooms

DESCRIPTION

The flush mounted ceiling speaker CL-200T-AG is m ade for humid rooms where fire integrity i s also required. The ceiling speaker has a tropicalized speaker cone to
withstand moisture and the entire enclosure is made from non-combustible materials. The CL-200T-AG is therefore s uited for ceilings where B-0 fire rati ng is specified.

Made for marine environment
Good audio qualit y
Steel back box to reduce spread of fire
Selector on the back to adjust power tapping t o accommodate separate room sizes
Cable glands increase stability of wire connectivit y
Supports loop wiring with 2 x M20 cable glands
Includes therm al fuse and ceramic terminals
Aluminum grille and fully painted chas sis provides good corrosion properties

Created: 23.05.2018, updated: 08.05.2020 page 1/2

www.zenitel.com [e-mail]

Zenitel and its subsidiaries assume no responsibility for any errors t hat may appear in this publication, or for damages arising from t he informatio n therein. Zenitel products are develo ped and marketed by Zenitel. The company’s Quality Assurance
System is certi fied to meet t he requirements in NS-EN IS O 900 1. Zenitel reserves the right to mo dify designs and alter specifications without notice.

ZENIT EL PROPRIETARY. T his document and its supplementing elements, contain Zenitel or t hird party informat ion which is proprietary and confid ential. Any disclosure, copying, dist ribution or use is prohibited, if not otherwise explicitly agreed in
writing with Zenitel. Any authorized reprod uction, in part or in whole, must include this legend; Zenitel – All rights reserved.

SPECIFICATIONS

Dimensions (Diameter x depth) 199x101mm

Weight 1,45kg

Mounting Flush mounted – ceiling or wall. Clamps and 3 screws (4 mm holes)

Operating temperature range -20 - 90 °C

Rated/ max power 6W

Power tappings 6 – 4 – 2 – 1 W

SPL 1W / 1m 92 dB

Frequency range 150 – 20000 Hz

Color RAL 9010

Glands 2xM20

IP rating (from front side only)

IP 44 (from front side only after installation in a flat horizontal roof in accordance with mounting instructions
and using al l three fasteni ng screws)

TECHNICAL DIMENSIONS

Created: 23.05.2018, updated: 08.05.2020 page 2/2

www.zenitel.com [e-mail]

Zenitel and its subsidiaries assume no responsibility for any errors t hat may appear in this publication, or for damages arising from t he informatio n therein. Zenitel products are develo ped and marketed by Zenitel. The company’s Quality Assurance
System is certi fied to meet t he requirements in NS-EN IS O 900 1. Zenitel reserves the right to mo dify designs and alter specifications without notice.

ZENIT EL PROPRIETARY. T his document and its supplementing elements, contain Zenitel or t hird party informat ion which is proprietary and confid ential. Any disclosure, copying, dist ribution or use is prohibited, if not otherwise explicitly agreed in
writing with Zenitel. Any authorized reprod uction, in part or in whole, must include this legend; Zenitel – All rights reserved.