Welcome:
Congratulations on your purchase of ZEN mobile device.
ZEN, your best mobile communication partner. Your mobile provides many functions that are
practical for daily use, such as a calendar, clock, an alarm clock, and messaging functions.
PS: Where any discrepancy arises between the practical function and the manual book, the index
and practical function shall prevail. The Company reserves the right of revising the manual book
without notice.
M22
Page 2
Contents
1.For your safty ............................................................................................................................... 3
2. Getting started ............................................................................................................................. 4
Read these simple guidelines. Not following them may be dangerous or illegal.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical equipment. Do not use the device
where blasting is in progress. Follow any restrictions.
Please keep this cell phone away from children, as they could mistake it for a toy, and hurt
themselves with it.
Don’t try to modify the phone except by the professional.
Warning!
Only use the authorized spare parts, otherwise it may damage the phone and the warranty will not
work. And it may be dangerous.
SWITCH OFF WHEN REFUELING
Don’t use the phone at a refueling point. Don’t use near fuel or chemicals.
SIM CARD AND T-FLASH CARD ARE PORTABLE
Pay attention to these small things to avoid children eating them.
Notice: The T-Flash Card can be used as a Memory Disk, the USB cable is necessary.
BATTERY
Please do not destroy or damage the battery, it can be dangerous and cause fire.
Please do not throw battery in fire, it will be dangerous
When battery cannot be used, put it in the special container.
Do not open the Battery.
If the battery or the charger is broken or old, please stop using them.
Page 4
USE QUALITY EQUIPMENT
Use our authorized equipment or it will cause dangers
ROAD SAFETY COMES FIRST
Give full attention while driving; Pull off the road or park before using your phone if driving
conditions so require.
INTERFERENCE
All wireless devices may be susceptible to cause interference, which could affect performance.
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft. It’s not only dangerous but also illegal to use
mobile phone in an aircraft.
2. Getting started
Battery Install Notice
Before you install or change battery, please ensure you already turn off the phone.
Install or change SIM card Notice
1. Before you change SIM card, please make sure you already turn off the phone and dispose
battery.
2. Insert the SIM card and make the golden contact area face down and the nick face out.
Charge the battery
1. Before charging the battery, please make sure that the battery is installed properly in the
phone.
2. Connect the charger lead to the phone socket, and then connect the charger to the AC
socket.
3. If the phone is on when it’s charging, charging indicator is displayed on the screen. If the
phone is off when it’s charging, user can use it while charging. When the battery is fully charged,
the charging indicator on the screen is full and stops twinkling. While using the handset for the
first time, please completely discharge and then completely charge the battery. Repeat the process
Page 5
for three times to achieve the full performance of the battery
4. Long period unused or some other reasons may cause low battery pressure, so at the beginning
of charging the screen is black and it may take a while before the charging indicator appears.
Warning: When charging, in order to avoid serious damage to phone circuitry, do not remove
or dispose the battery.
3. Calls
3.1 Key Explanation
In front of M22 mobile phone
1. Speaker 2.Screen 3. Navigation key 4.Ok key
5. Menu Left 6.Menu Right 7.Call key 8.End key
9. Number (0-9) key 10. “*”key 11. “#”key 12.Microphone
13.Loud speaker 14.Camera 15.Audio Jack 16.USB Interface
Unlock Keypad: press <Unlock> then press the * key.
* Key # Key
Functions vary in different situations or function menus:
In inputting status, “*” for symbols.
In inputting status, “#” to switch inputting methods.
In standby mode, hold “#” to switch the phone in Silent mode.
In standby and dial mode, press and hold “*”, you can input +, P and W.
In standby mode, input “+” for an international call; in dial status, input “P” for calling
number with extension phone.
3.2 Sub Menu Explanation
When you press Menu Left, you will enter sub menu. Press Navigation key Right or Down to
select the function with clockwise, press Navigation key Left or Up to select the function with
counter-clockwise. The name of function will show in the middle frame.
3.3 Make a Call
Making a call by dialing numbers:
1. In standby mode, enter the phone number. If you want to change the numbers, press left
and right direction key to move the cursor and press〈Clear〉to delete a number. Press and hold 〈Clear〉to delete all characters.
2. Press the call key to call the number.
Making a call using the Phonebook:
1. In standby mode, press〈NAMES〉to enter the phonebook, choose or input the needed
letter (phonetic) to search. Choose the number; press the call key to dial out.
2. You also can enter the phonebook list from functional menu, then search and call.
Call the Dialed calls, Received calls, Missed calls or Rejected Calls:
Speed dialing method:
1. In standby mode, press the call key to view the call log list, missed calls.
2. Choose a number and press the call key to dial.
Making a call using the menu:
Page 7
1. In standby mode, enter the menu, choose Call center; and select SIM A/B Call History.
2. Choose from missed calls, dialed calls, received calls and rejected calls
3. Choose the needed number and press the call key to make a call.
3.4 Answer an Incoming Call
Press the Call key to answer an incoming call.
3.5 Call Options
Offers numerous in call functions (some of this functions need a subscription with the service
provider). During the call, press〈Option〉and choose between the following options :
Hold single call: Pause the call.
End single call: End the present call only.
New call: Ready to make a new call. (Need to be supported by the service provider)
Phonebook: Same as phonebook list in the functional menu.
Messaging: Same as SMS in the functional menu.
Sound recorder: Record the sound.
Mute: Turn off the Microphone to make your voice not to be heard.
DTMF (Dual-tone Multi-frequency): you can choose on/off; which is to send dual-tone
multi-frequency sound, this can offer dialing to the telephone numbers with extensions.
4. Input Method
Overview
You phone offers input methods as followings: Smart ABC, Smart abc, ABC, abc, Smart Hindi, Hindi Numeric, totally Seven methods.
Keypad Definition
The definition of keypad is as follow:
Left key: Enter and OK
Right key: Back and Cancel
Navigate Keys: cursor move or choose word.
# Key: switch input methods and a sign will be display in left side.
2-9 key: input the letter on the keys when input.
* Key: input punctuation
Inputting methods Explanation
Smart English
Page 8
Smart English (En): Blank is 0 key, and all punctuations are on 1 key Continuous input 844704702083790466304678806384631, there will be “This is a very good input method”, and then press OK to input.
English Input Method
English input method (Including English capital and small letter) English Input is generally done this way:
Every key is set to input multi characters. Fast repeatedly press the key until the
character you want appears. Wait for the cursor to move and then input the next
character.
When you need to input English punctuation mark and certain distinctive marks,
under the English input method (including Capital and small letter), press * key to
choose the appropriate punctuation mark.
Press # to switch inputting method.
If you need a space between two words press 0 key once.
Press〈clear〉to delete wrong input, hold〈clear〉to delete all the message.
Number Input Method
Number input method is generally done this way:
Press 0-9 key to input the needed number.
Press # to switch inputting method.
Press〈clear〉to delete wrong input, hold〈clear〉to delete all the message.
5. Function List
5.1【Settings】
5.1.1【Phone settings】
In this functional menu, you can do the following settings:
1. Display : Wallpaper/Screen saver,/Greeting text/Power On display/Power Off display /Show
Date and Time/Show network name
2. Time and date: Set time zone, set time, /date, and set time format.
3. Schedule power on/off: Set a time schedule to power on/power off.
4. Language: English or Hindi
5. Pref. input method: Set default inputting language, which is inputting language when writing
a message.
Page 9
6. Shortcuts: Set keys for corresponding shortcuts’ function.
Name
Description
Divert all voice
calls
Network will divert unconditionally all your incoming calls.
7. Dedicated key: Set corresponding shortcut function for up, down, left and right direction
keys.
8. Auto update of date and time: Set auto update of date and time type on/off.
9. UART settings: Select SIM A or SIMB.
10. LCD backlight: Set Brightness and time.
5.1.2【call settings】
1、Speed dial:
To switch on the speed dial function, and edit the corresponding speed dial number. If the
speed dial is "On", then you can long press the corresponding key (2-9) to dial the number
designated to the key through the standby mode.
2、 SIM card A/B call settings:
Caller ID: Includes—Set by network, hide ID and Send ID.
(1)Set by network: The number of the phone will be sent as per the default
mode when a call is initiated.
(2)Hide ID: The number of the phone will not be sent when a call is initiated.
If the system doesn't support this function, it may not make a call.
(3)Send ID: The number of the phone will be sent when a call is initiated.
Note: This function requires the network support. For details,
please contact the network operator.
Call waiting: To set functions like activate/deactivate and enquire call waiting.
During call holding and making multi-party calls, this function should be activated
first, and network support is required for the specific implementation of the function.
Call divert: It is a network function that can only be activated when you apply for
this service with the network operator. The function can divert calls that satisfy the
conditions to the other caller's phone number you have designated.
Page 10
Divert If
unreachable
To divert an incoming call when your phone cannot be reached
(the phone is either switched off or out of network coverage)
Divert If no
answer
To divert an incoming call after a certain time period during
which the call is not answered.
Divert If busy
To divert an incoming call when you have an active call or
other operation is busy.
Divert All data
calls
Network will divert all incoming calls (requires support of
network).
Cancel all
Diverts
Cancel all the divert functions.
Call barring:
(1)Outgoing calls:
All calls: To restrict all outgoing calls
International calls: To restrict international outgoing calls.
International Calls Except to Home PLMN: While you are abroad, you
can only call the numbers of the country (where you are) and your home
country (at which your service supplier is located)
(2)Incoming calls:
All calls: To restrict all incoming calls.
When roaming: To restrict all incoming calls except the numbers from
your local service area.
(3)Cancel all: For canceling call barring. (Password for barring is required.)
(4)Change barring password: Apply to the network for changing the password
for call barring.
Line switching: Select Line 1 or Line 2.
3、 Call time display: Enable or disable the call time display.
4、 Call time reminder: Off, Single, Periodic.
5、 Blacklist: Enable or disable blacklist and edit blacklist.
6、 Auto redial:
You can enable or disable auto redial function. If a number is not reachable, the phone will
automatically redial.
7、 Auto quick end: Enable or disable the auto quick end.
5.1.3【Network settings】
SIM A/SIM B Network Settings:
Network Selection: search for network and register.
Preferences: manually search for network you want to connect to.
Page 11
5.1.4【Security settings】
You can set your phone security settings in this functional menu in order to avoid you phone
or SIM card to be used illegally:
1. SIM A/SIM B Security Settings:
SIM A/B Lock: you need to input correct PIN code to turn on/off this function.
Fixed Dial: Once activated, only the number from the list can be called (Need to input
correct PIN 2 code).
Barred dial
Change password
2. Phone Lock: you need to input correct phone password to turn on/off this function.
3. Auto keypad lock: To set the auto keypad lock time.
4. Change password: The default password “1234” of phone, message, phonebook, calling
records and privacy protection can be changed as the desired password of 4 to 8 digits.
5. Private Protect: Includes protection for phone book, message, call log and My File. If this
function is enabled, corresponding menu or content will be locked. To access, enter the password.
The default password is “1234”.
6. Theft Track: You have to set this function, in case your phone is stolen/lost .Default
password is “1234”to set this function
Note:The default phone password is 1234, please modify to a password of your choice as
soon as possible.
5.1.5【Dual SIM Settings】
Select between: Dual SIM Open, Only SIM A open, Only SIM B open or Flight Mode.
5.1.6【Restore Factory Settings】
Input the correct phone password, then you can restore factory settings value. (Original
password is 1234, same as the phone password)
Page 12
5.2【Multimedia】
5.2.1【Camera】
Once you are in Camera mode, press〈Option〉to view the following menu:
Photos: View gallery folders.
Camera settings: In this functional menu, you can set the shutter sound, the EV, the
contrast, the Anti-flicker ,the Delay timer and the Cont. shot
Image settings: Default settings about image size and quality.
White balance: It can set white balance of the camera.
Scene mode: You can make settings about Auto and Night scene.
Effects settings: There are many kinds of effect including normal, grayscale, sepia,
sepia green, etc.
Storage: To set the storage directory for photos.
Restore default: Restore factory default settings.
After finish above settings, in the image capture mode, press left and right direction key
to adjust lighting and press up and down direction key to adjust focus, then press OK key to
shoot.
5.2.2【Image Viewer】
Press up and down direction key to scroll images, press left key to do following options to the
selected picture file:
View: View selected image.
Browse Style: Choose images’ browse style between list style and matrix style.
Send: Send present image As multimedia message or via Bluetooth.
Use as: Use present image as wallpaper, screen saver, power on display, power off
display and caller picture.
Rename: Edit the name of present file.
Delete: Delete present file.
Delete all files: Delete all files in the image viewer.
Page 13
Sort by: It can sort by name, by type, by time by size and none.
Storage: It can select storage.
5.2.3【Video Recorder】
In the camera interface, the following options are available:
Camcorder Setting: Configure EV, Night mode and Anti-flicker.
Video settings: Set the video quality: good /normal/low.
White balance: It can set white balance for .video recorder.
Effect Settings: The video effect for the video.
Storage: To set storage directory for video.
Restore Default:Restore the video configuration to the default settings.
Video player: To play the video.
5.2.4【Video Player】
There are the following options in the video player menu:
■ Play:Enter the player menu and play the video.
■send: Transfer videos through multimedia message or Bluetooth.
■ Rename: Rename the video file
■ Delete: Delete the video from play list
■ Delete All files: Delete all videos from play list.
■ Sort by: Sort the videos in the different way
■ Storage :To select the storage directory for a video file.
5.2.5【Audio Player】
Select one audio file in the play list and the following options are available.:
Play: Play the audio file.
Details: View the detail of the audio file.
Add to User ringtones: Add the audio file to ring tone list.
Refresh list: To update the play list for songs.
Settings: Configure the audio player
Page 14
When playing music, press ok key to pause/play; number “0” key to stop; left and right to
switch music.
5.2.6【Sound Recorder】
To make an audio record, select the “Sound Recorder”. Select the "Options" for the selected
record file to perform the following operation:
New Record: To start sound recorder.
List :List all audio files
Settings: You can set storage and file format
5.3【User Profiles】
Profiles options: General, Meeting, Outdoor, Indoor, Headset, Bluetooth and Power Saving
Mode.
These profiles are set before leaving the factory; user can customize the settings through
personal settings.
Select and enter personal settings menu, profile modification are as followed:
1.Tone Settings: Include settings about incoming call, alarm, Power On/Off, message and
keypad sound.
2. Volume: Adjust ring tones and key sound volume using up and down direction keys.
3. Alert Type: There are five types of ring: ring only, vib .only , vib. and ring, vib. then ring.
4. Ring Type: There are 3 types: Single, repeat and ascending.
5. Extra Tone: Press on/off to set for: warning, error, camp on and connect.
6. Answer Mode: You can set any key to answer. You also can set auto-answer when it’s hand
free mode.
7. Health outgoing call: Enable or disable health outgoing call.
5.4【Phonebook】
5.4.1【Quick Search】
1. In present menu, press # to switch needed inputting method.
Page 15
2. While searching, input characters to find the numbers that satisfy the input.
3. For example: To search records named “ABC”, first check whether the inputting method is
Smart abc, then press 2 key to input A you will find it. If search for Hindi words begin with
capital character “A”, press # key to switch inputting language to Hindi, then 2 key to “A”,
you will find it.
5.4.2【Name Search】
1. In the Phonebook menu, press the direction keys to select “Name Search”, press〈Ok〉 and
enter the edit menu.
2. In the edit menu, press # to switch inputting method or press 〈Option〉 to choose inputting
method. After inputting the name, press 〈Option〉and choose search,it will find the contact
that match best.
5.4.3【Add New Contact】
Choose to add the new entry in the phone or in the SIM card。
When screen displays add name menu, to view information about inputting method you can
check “inputting method”. When you input a fixed telephone number, please also input its area
code. Then input related contents after specific icon as followed instructions: name, phone number,
etc.
5.4.4【Batch Operation】
Select all marked entries in the phonebook: Mark several delete, Batch delete, Batch
copy ,Batch Move.
5.4.5【Export and Import】
Backup Phonebook to memory card or Resume Phonebook from phone.
5.4.6【Phonebook Settings】
Setting: Memory Status/Caller groups /Preferred Storage /My number.
Page 16
5.5【Messaging】
5.5.1【Text message】
The SMS function is a network service. You may need to apply to the network operator first
before you can send and receive a short message.
Your cell phone supports the short message sending function. Short messages are sent to
network SMS center first and then sent to subscribers. If the subscriber does not turn on the phone
or cannot receive messages (storage is full), the network will keep this message temporarily. The
keeping period will be determined jointly by the message sending user's setting and the service
operator.
By using the SMS, the phone can send and receive long messages. Sending long messages
may affect the charge for the messages. For details, please contact your service operator.
If the memory for messages is full, a twinkling icon will be displayed on the screen. Your
phone supports dual SIM card so messages in SIM card A and B are separately stored. The
reminders for full memory of SIM card A and B will also be given separately. In such case, you
need to delete at least one message in the memory of the respective SIM card to receive new
message.
Note: When sending messages, your device may display Message Sent. This is an indication that
the message has been sent by your device to the message centre number programmed into your
device. This is not an indication that the message has been received at the intended destination.
For more details about messaging services, check with your service provider.
Write message:
Your device supports the sending of text messages beyond the character limit for a single message.
Longer messages will be sent as a series of two or more messages. Your service provider may
charge accordingly.
The number of available characters and the current part number of a multipart message is shown
on the top right of the display, for example-- 160/1.
The phone supports sending a long message having over 160 characters (character number
restriction for common text messages). If a message has more than 160 characters, the message
will be divided into two or more messages and sent.
The following menu option functions by using left key are provided when you are writing a short
message:
SIM A/B Done: Enter sending method option and send the message.
Insert template: To use a built-in template.
Insert card: To insert a selected contact from the phonebook.
Insert Call log: To insert the recent call history.
Insert message: To insert a message from the inbox, outbox, unsent box,
Drafts.
Insert bookmark: To insert the selected wap bookmark.
Text format: Set the font, align and paragraph of the texts.
Input method: To select an input method for the text messages.
Page 17
Send a message:
When a message is composed and the SIM card is selected, you can send the message to the
receiver through the following ways:
1. Send to: Send the message directly.
2. Send and save: Save the messages to the Outbox and send it directly
3. Send to Drafts: Save the message to the Drafts.
Write flash message
You can send message which the receiver can view it immediately without pressing any
key.
Inbox:
The received messages are saved in Inbox. You can view all received messages in
Inbox. The messages of SIM card A/B are separately saved. You can perform the
following operations:
Delete: To delete the current message.
Delete messages with same number: To delete the message with same number.
Forward: To forward the current message to the other subscriber.
Add to blacklist: To move to filter SMS list.
Copy to SIM/Phone: When the message is stored in phone storage, it can be
copied to the SIM card. When the message is stored in SIM card, it can be copied
to the phone storage. You can transmit all messages between SIM card and phone
storage.
Move to SIM/Phone: When the message is stored in phone storage, it can be
moved to the SIM card. When the message is stored in SIM card, it can be moved
to the phone storage. You can transmit all messages between SIM card and phone
storage.
Move to Archive: To move to Archive.
Use number: To use the number of the received text message.
Use URL: To use URL of the message.
Outbox:
If the “Save and send” is selected when a message is sent, the sent message will be
saved in the Outbox.
Unsent box
If the message is failed to be sent, the message will be saved into unsent box.
Drafts:
You can save a message you edit in the Draft. Corresponding operation can be
performed to a Message saved in the draft.
Archive box:
You can move the text messages from the inbox /Outbox to the Archive box.
Templates:
Select frequently used phases from the template and insert into message editing
interface.
Reject by SMS:
Page 18
When you reject a call, you can send a message to the caller automatically, if you
enable this function.
Message search:
You can search message by name, number or data.
SMS settings:
You can set some parameters of messages in this menu. Parts of setting menu of SIM
card A/B are separated
1.SIM A/B message setting:
(1) Profile settings: To set the name of a profile, SMS center number, message validity
period, and message type. To send a message, the SMS center number shall be provided.
Note: The number of the SMS center is provided by the network operator. For details,
please contact the network operator.
(2) Common settings:
Enable or disable delivery report, reply path and save sent message.
(3) Memory Status: Check memory space use of SIM card or mobile phone.
(4) .Preferred Storage: Appoint the directory to save the message. (SIM cards or mobile
phone)
2. Export Msg : You can export all inbox/all outbox/all draftbox/Archivebox sms.
3. Sort message: You can select sort by time, date or number.
4. SMS Firewall : Enable or disable the SMS Firewall function, you can enter pattern or a
number ,when the function is enabled, your phone will reject the messages from the number.
5.5.2【MMS】
A multimedia message can contain character, audio file and picture. If the size of a
multimedia message is over the limit, the phone cannot receive this multimedia message.
The display effect of multimedia messages may vary with different receiving equipment.
Note: You can use this function only when the service is supported by your network
operator or service provider. Only the device featuring multimedia or Email can receive
and display a multimedia message. For details, please contact the network operator.
Write message:
1. To: Enter the phone number or Email address of the receiver.
2. Cc: Enter the phone number or Email address of the receiver for carbon copy.
3. Bcc: Enter the phone number or Email address of the receiver for blind carbon
4. Subject: Edit the subject of a multimedia message.
5. Edit content: Edit the content of the text of the multimedia message.
This includes the following options:
Done: To close the edition of a multimedia message.
Input method: To select the input method for edition of a multimedia message.
Add picture: To insert an image to the multimedia message.
Add audio: To insert an audio file to the multimedia message.
copy.
Add video: To add a video file to the multimedia message.
Page 19
Add attachment: To insert an attachment to the multimedia message.
Add slide before: To insert a new slide ahead of the current slide.
Add slide after: To insert a new slide behind the current slide.
Add bookmark text: To insert a bookmark URL.
Preview: To preview the currently edited multimedia message.
Slide time: To set the play time of the current multimedia message slide.
Inbox:
You can view the received multimedia message in the inbox and perform the
following operations:
View: To view a multimedia message, and save the attachment of picture or others
in the multimedia message
Reply: To reply a multimedia message to the sender directly.
Reply by SMS: To reply through SMS.
Reply All: To reply all through MMS.
Forward: To forward the multimedia message to others.
Delete: To delete current multimedia message
Delete all: To delete all multimedia messages in the inbox.
Save as template
Properties: view the MMS's sender, receiver, copy, subject, date time and file size.
Use Details: To view the detailed information of the current multimedia message.
Outbox:
You can view a multimedia message failed to be sent. Operation of viewing, Sending,
deleting, deleting all, saving as template, viewing message properties, using details can be
implemented.
Drafts:
You can save an edited multimedia message in the Drafts, Operation of drafts such
as viewing, sending, deleting, editing, deleting all, saving as template, viewing message
properties and using details can be implemented.
Templates:
MMS settings:
1. profiles :You can select profile from the following:
(1) Add new
(2) Vodafone MMS
(3) Idea MMS
(4) MTNL-Delhi MMS
(5) MTNL-Mumbai MMS
(6) Aircel MMS
2. Common settings:
This menu allows you to make the following setting to any sending and receiving MMS.
Compose: you can set you're composing format.
Creation mode-free/restricted/Warning.
Page 20
Picture resizing-160*120,320*240, off
Best page time-on/off
Auto signature-on/off
Signature- To input signature.
Send:
Validity period----- set save and send time in SMS service center
Delivery Report----- activate/deactivate sent report.
Read Report----- activate/deactivate read report.
Priority----- priority of MMS include high, medium and low
Slide Time----- set the time interval of viewing. Multi-slide received MMS by remote
party. Default: 5
Delivery Time----- Immediate, 1hour later, 12hours later, 24hours later
Retrieve:
Home Network----- immediate, rejected, deferred,
Roaming----- as home, deferred, rejected.
Read Report----- never send, on request, send.
Delivery Report----- on/off
Filter:
Anonymous--- Allow and Reject.
Advertisement--- Allow and Reject.
Memory status: It shows total used space and free space.
5.5.3【Voice mail server】
Voice mail server is a network service. You may apply for this service beforehand.
For detailed information and voice mail server number, please contact your network
operator.
Voice Mail Server of SIM card A/B
Edit: To edit or delete your voice mail server number. Press OK to store your
number.
Call voicemail: To dial the voice mail server number stored in your voice mail
server number list.
Precaution: Under the standby condition, you can call the voice mailbox number by
long pressing the numeric key "1" after you have set the voice mailbox number.
5.5.4【Broadcast message】
Cell broadcast is a service provided by the network operator to send messages such
as weather forecast, traffic status, etc. to all GSM subscribers in a specific area.
Broadcast message of SIM card A:
Note: The realization of the cell broadcast function needs the support of the network.
For details, please contact the network operator.
Receive mode: Enable/disable the Broadcast Message.
Page 21
Read message: When the Broadcast Message has been enabled, the received
message can be read after the corresponding server has been enabled.
Languages: To enable/disable all the languages of messages received.
Channel settings: To select, add, edit or delete channel numbers.
Note: The operation and settings of SIM card B cell broadcast is the same as that of SIM card
A.
5.6【Call Center】
SIM A/B Call History:
SIM A/B Missed Calls:Check the recent missed calls.
SIM A/B Dialed Calls:Check the recent dialed calls.
SIM A/B Received Calls:Check the recent received calls.
Delete SIM A/B Call logs:You can delete the missed calls, dialed calls, received calls
or all the calls lists.
SIM A/B call timers: You can do the following options :
Last call: Check the latest call duration.
Dialed calls: Check the total duration of dialed calls.
Received calls: Check the total duration of received calls.
Reset all: Clear all the duration record.
SIM A/B text message counter: Check the number sent and received SMS.
SIM A/B GPRS Counter:Check the last sent, last received, all sent and all received data
amount or reset the counter.
5.7【Fun & Games】
5.7.1【Java App】
1. Java :List all the java games
2. Java settings: To set Java games or Java applications.
5.7.2 【FACEBOOK】
5.7.3 【MSN】
5.7.4 【YAHOO】
5.7.5 【SKYPE】
5.7.6 【Twitter】
5.7.7 【Local games】:
Provide you some games. Please refer to help option of the game for specific operation
and instructions.
Game settings:
BGM: To activate/deactivate the game background music.
Page 22
Sound effect: To enable/disable the sound effect.
Vibration: To enable/disable the vibration effect.
Volume: To turn up/down the game sound.
5.7.8【Services】
1.【STK】
(SIM card and mobile type related)
This function is provided by the network supplier. If the SIM card and the network supplier do not
support this kind of service, you will not be able to use this function. For more information please
contact your network supplier.
2.【Internet service】
This function allows you to acquire or visit diversified services on the Internet through
message or network. Please contact your network operator for more information.
a. Homepage: Start a connection to the selected URL set.
b. Bookmarks: Access or edit a bookmark.
c. Recent pages: Browse a saved URL.
d. Offline pages: Check the history web addresses.
e. Input address: Enter the address.
f. Service inbox: Enable a trusted server to send messages to the phone, which is saved
in the Service Inbox.
g. Settings: Set parameters of WAP browser. Please consult your network operator for
details of the parameters
3.【Data Account】
Support GSM data and GPRS.
4.【File manager】
Press left key option to enter functional menu, the following options available:
Open: See the files in the different folders of your phone.
Format: Format mobile phone or memory card.
Remove
Rename
Details
Page 23
5.7.9【EBook Reader】
E-book application can help you to read a file in .txt format.
Open E-book: To open an E-book.
Clean up bookshelf: To clean bookshelf.
Global settings: To set the attributes of an E-book.
5.8【Organizer】
5.8.1【T CARD】
You can use this function to Export the phonebook or SMS to T-flash card,also you can use it
import the phonebook from T-flash card.
5.8.2【Calculator】
Press 0-9 keys to input numbers and # key for “.”
Press navigate keys to input +、-、×、÷
Press <Clear> can delete the previous input, or hold <Clear> to delete all input.
Press OK to get the result.
Note: The error is available because of limited accuracy.
5.8.3【Currency converter】
Input the foreign exchange currency first, and then input the number to convert.
5.8.4【Health】
You can manage your health by BMI, .you can input your height and weight, and then press
OK, and you can get the BMI result.
5.8.5【World Clock】
Enter world clock to view the time in different city of the world.
Page 24
5.8.6【Stopwatch】
Stopwatch has two types, typical stopwatch and nWay stopwatch. The stopwatch can record
time exactly. Press OK to following options:
Typical Stopwatch: Press OK to split timing or lap timing. The records can be saved to
view, delete or delete all.
nWay Stopwatch: Press OK to start. Record timing by pressing navigate keys or hold
<continue> to clear record.
5.8.7【Bluetooth】
The following options are available in the Bluetooth menu:
1. Power:On/Off.
2. Inquiry Audio Device:Search for devices.
3. My Device:Inquiry new device or display paired devices and take the options.
4. Active Device:Display all connected devices.
5. Setting:Configure the settings of Bluetooth. For example, change device name ,Audio
path, storage etc.
6. About:It lists the information of Device Name, BD address and support service.
5.8.8【Alarm】
The options of editing alarm:
1. On/Off: turn on/off alarm.
2. Time: set the time of alarm.
3. Repeat: set the repeat mode for alarm: once/everyday/custom..
4. Snooze: set the snooze time. It will ring again according to configuration.
5. Alert Type: Vib. and Ring, Ring only, and Vib. Only.
5.8.9【Calendar】
With this function, you can view the calendar and schedule, and you can schedule with
the scheduler to set the schedule and alert. Move the cursor to the desired date with
direction keys. If a memo has been set in the schedule of some date, the date is
Page 25
highlighted. To view all memos of a day, move the cursor to the date. In this case, the
following operation can be performed.
View: To view and set the schedule of a day
View all: To view the schedule of all day.
Add event: You can add three kinds of task on the data:1.reminder;2.Meeting;3.Course
Delete event: You can delete All /overdue/Spec period event
Jump to Date: To input the date to enter the calendar, then move the cursor to the
specified date.
Go to weekly view
5.8.10【Tasks】
When adding a task, you must edit the following: year, month, day; the task duration time;
Add a Note; Set the alarm On or Off;
On an existing task, by pressing 〈Option〉, you have the following options:
View: view the existing task.
Add: Add a new task
Edit: Browse and select tasks options to make proper settings.
Delete: Delete present task.
Delete overdue: Delete overdue tasks.
Delete all: Delete all tasks on the same day.
Jump to date: Jump to the task’s date.
Send vCalendar: Transfer the task by different means. (For example text
message ,multimedia message or Bluetooth)
Save as file
5.9【FM Radio】
Use your phone to listen to the Radio.
Channel list: List out all the current channels. You can enter channel list, edit it and
display the searched channel list. Display the recorded broadcasting list.
Manual input: Input the desired broadcasting channel manually
Auto Search:Search and create the channel’s list automatically.
Settings:Select the Radio background type.
Page 26
6. Warranty Card
Please check the following page. Thanks.
Update Service Centre List
XCITEMOBILE COMMUNICATION PVT.LTD
Address - 13, RANJAN SOCIETY,
DIVISION -2 NEAR B.
D PATEL HOUSE,
SARDAR PATEL COLONY,
NARANPURA,
AHMEDABAD-380013.
9725496699
Address - LAXMAN MANDIR,K B
PLAZA SHOP
NO-8,LAXMAN
MANDIR,BHARTPUR,RAJASTHAN
SANKHYAN MOBILE CARE
Address - HANIRPUR ROAD NEAR
GOVT HOSPITAL
9816022077
MOBITEL SERVICES
Address - GF 21, BUSINESS
CENTRE, RUPAM CHOWK,
BHAVNAGAR (GUJRAT)
9825453555 /