Zemgo ZEM-1000, ZEM-1001, ZEM-1002 User Manual

ZEM-1000 / ZEM-1001 / ZEM-1002

Smart Home WiFi Security

Alarm Receiver

User Manual

www.zemgoalarms.com

Smart Alarm Alexa Skill User Guide

How to make my Smart Alarm work with
Amazon Echo/Tap/Dot?

Before we start, we need to make sure that you have a Smart Alarm and it is
connected to Wi-Fi, please make sure that you have completed the steps on page
3, 4 and 5 before you sync the Zemgo hub to Amazon Alexa.

Step 1: Download and install Amazon

Alexa App to your smartphone.

Step 2: Log in the Amazon Alexa APP

using your Amazon account.

Step 3: Use the hamburger menu icon to go into the Skill page.

Step 4: Search “Smart Alarm” in the search bar to enable the

SSG Smart Alarm Skill.

Step 6: Tap “Grant” to link your Smart Alarm with your Amazon Alexa account, once
your accounts have been linked succesfully, you should see a success screen, now
you can start controllling the Smart Alarm with Echo/Tap/Dot using voice command,
such as:
“Alexa, tell Blue Dog to arm please”

Definition: This allows you to arm the system using voice control.

You can also get the
SN by long pressing
the device on the main
control page of the
Zemguard App,then tap
“Copy the SN” on the
pop-up menu.

Step 5: Enter your Smart
Alarm’s SN and Password
in the pop up window and
tap “Sign In”. The SN of
your Zemgo Device is the
same as the Device name
shown on page 4 Fig. 3.

General Information

The WIFI-enabled smart hub could be used for security alarm, elder care,
and wireless doorbell. It allows you to get updates and change setting with
smartphone anytime anywhere.

Main Features

WIFI-enabled cloud security alarm system
App-based control and monitoring
Know exact sensor that triggered in seconds
Plug and play, easy setup in less than ten minutes
Change setting and get live updates from miles away
View the entire system or a single sensor anywhere anytime
Easy to remove and take with you
Built-in strobe siren, 80 decibels of volume
Customize your system, expandable, supports up to 50 wireless
accessories
Customizable alert for each sensor
More than just an alarm system, doorbell and video monitoring are
optional

ZEM-1000 / ZEM1001 / ZEM-1002

System Overview

Turn ON AP mode:

Press the button for 5s, the hub will come with a continuous beeping
sound, blue light flash, then the WIFI hot spot is opened.

And then connect your cellphone to the WIFI hotspot named
Sa****, the default password is 12345678.

Turn ON pairing mode/Reset:
Turn on paring mode:Short press this button to turn ON pairing mode.
Reset: Long press the button until 2 beeps heard.

Long press the button to turn on/off the machine.

AC plug

Voltage: AC110~240V; EU, US, UK, AU plug optional

LED lighting definitions:

Arm: The red light is on always
Disarm: The red light is off
Bypass: (Home mode) the pink light blinking slowly
WIFI connection successful: Blue light on
WIFI connection is invalid: Blue light quick blinking
The hub is connected to serve: Blue light flashes once every 5s
Alarming: Pink light blinking and buil-in siren hooting

Zemguard

APP Download

Scan the QR codes below or search the keyword “Zemguard” on
APP store for IOS or “Zemguard” on Google Play for Android to download
the APP.

APP and Smart Alarm pairing

1. Power on the smart alarm hub.

2. Turn on AP mode by long pressing button , when the blue light
is quick blinking and the siren is beeping, it is under AP mode. Short
press button to exit AP mode.

3. Find the WIFI hotspot that starts with “SAxxx” in your mobile phone
WIFI list to connect to the hub, the default password is 12345678, AP
mode will be on for 5 minutes and exit automatically.

Pairing/activate the Door / Window Contact (ZEM-1004)

1. Please make sure you have both pieces of the door / Window contact close
together. (Fig. C)

2. Now you should separate both pieces of the Door / Window contact until you
see a blue light from the contact and it will be followed by a beeping sound from
the hub, this indicates that you have successfully paired the contact. (Fig. D)

Accessories

Remote Control (ZEM-1006)

The remote control is easy to carry, it can be used to set the system to
Arm/Disarm/Home or activate an alarm at touch of the SOS button.
You can also remote arm/disarm/bypass the system using smartphone
APP.

Note: the gap between the transmitter and magnet should less than 1cm

Troubleshooting

1. The smart hub doesn’t respond to APP operation.
a) Check whether the local network is working.
b) Make sure the smartphone is connected to internet.

2. Remote control doesn’t work.
a) Check if the remote control has been paired to the smart hub
b) The distance between the smart hub and remote control is too far away.

3. Smart hub can’t respond to sensor/detector.
a) Check whether the system is armed
b) Check if the sensor/detector has been paired to the smart hub.
c) Check if the sensor/detector is far away from the smart hub.

3. Fail to connect the smart hub to router.
a) Make sure the smart hub is under AP mode and your smartphone is
connected to the smart hub during WIFI setting.
b) Reset the smart hub and try again.

Specifications

Smart Alarm Hub

The “brain” of the system, with sound & flash, get a live updates and
change setting anytime anywhere.

Operating Voltage: 100-240V AC 50/60Hz
Wi-Fi standard: 2.4GHz 802.11b/h/n
Stand-by power consumption: <2W
Operating RF: 433.92MHZ
The maximum number supported for wireless accessories: 50
Material: ABS
Alarm volume: 80dB
Working temperature: -20°C~+50°C (-4°F~+122°F)
Working humidity: ≤85%

How does it work?

4. Launch the Zemguard APP, tap the add button “+” and select “Cloud Security
Alarm System”.

6. In order to setup the Zemgo Hub to your local Wi-Fi Settings, go into the Control
Page by Tapping on the added device, tap the Setting button and select " Wi-Fi
Setting" from the drop down list, Tap " Wi-Fi management". Here you will find a list
of Wi-Fi selections, please choose your Wi-Fi router and include your Wi-Fi
password. The blue light will flash once for around 5S and then it will show that
you have connected your Zemgo hub successfully to your Wi-Fi router.

5. Tap “LAN search” and select the device ID from search result, enter device
name and password, tap the confirm button to save. The initial password is

1234.

Note: The initial device password is 1234, the device name is
user-defined

Tap the Device ID.

Keep in mind that your device
ID located in this section will
also be used as the SN
number to Sync the device
with Amazon Alexa, so please
make sure that you take a
note of this number. You will
need it for the amazon Alexa
sync on page 7.

Enter device name and
password.

Fig. 2 Fig. 3

Fig. 4 Fig. 5

Note: Make sure the smart hub is under AP mode and your
smartphone is connected to the smart hub during WIFI setting.

Fig. 6 Fig. 7 Fig. 8

Note: If your Android system’s smartphone can not make Amazon Alexa connect with
Smart Alarm, please kindly complete the connection by your computer.

4) There are four modes for each sensor:

Normal: In arm mode, when normal sensors are triggered, system
will alarm. In disarm mode, when normal sensors are triggered, system
will not alarm.

Home (bypass): In home mode, only normal sensor will be triggered and
home sensors will not be triggered while alarming, this will allow user to
move freely at home.

24 hour: Regardlesss the system is armed or disarmed, when 24 hour
sensors are triggered, system will alarm at once.

Delay: In arm mode, when delay sensors are triggerd, system will
alarm after the entry delay time you have set.

1) The hub will recognize remote and
doorbell button automatically, the
other sensors you should edit the
type after added.

2) You could rename the enrolled
sensor to get a user-defined alert

3) You could disable/enable each
sensor anytime anywhere

Edit/Delete accessories

Long press the accessories name on your spmartphone, then you can edit
the accessories’ mode, type, name, or delete the accessories.

Fig. C

Fig. D

Pairing/activate the PIR (ZEM-1005)

In order to pair the PIR make
sure you have removed any
battery paper from the PIR.
Then you will wave your hand
in front of the PIR until you
see a blue light from the PIR.
Once you see this, it should
be followed by a beeping
sound from the hub that
indicates that the PIR has
been paired.

Pairing/activate the Key Fob (ZEM-1006)

In order to pair the Key Fob make
sure you have removed any
battery paper from the Key Fob.
Press any button on the Key Fob
then you will see a blue light come
on from the Key Fob followed by a
beeping sound from the hub that
indicates that the Key Fob has
been paired.

Pairing/activate Doorbell Transmitter
(ZEM-1007)

In order to pair the Doorbell
Transmitter make sure you have
removed any battery paper from
the it. Press the button on the
Doorbell Transmitter then you will
see a blue light come on from the
Doorbell Transmitter followed by a
beeping sound from the hub that
indicates that the Doorbell
Transmitter has been paired.

Method 2 (Fig. B): Start pairing mode from APP.activate the accessory and
succeeded with a beep.

Add Accessories

Fig. A

Fig. B

Change battery: anticlockwise to move and open the base cover to change

the battery.

Doorbell Bell Transmitter (ZEM-1007)

The smart hub will ring when the doorbell button
is pressed, and it will push an instant alert to
your smartphone simultaneously.

Installation method:

APP Operation and Setting

System setting

Hooting time of siren: the time that siren will hoot while alarming, the initial time
is 1 min.
Arm delay: Exit delay gives you time to exit after arming.
Alarm delay: Entry delay gives you time to disarm the system upon entry, before
an alarm occurs. Only the delay sensors are invalid, the non delay sensors will
be triggered normally.
Timing arm/disarm: You can set up the system to arm/disarm automatically at a
defined time every day.
Prompt tone for remote: you can turn on/off the prompt tone while using remote
control.
Timing arm/disarm ON/OFF: Turn on/off timing arm/disarm.
Language: change the notification language.

Server setting

*Important: modify the setting may cause fail of pushing notification.

Heartbeat time: the interval time of smart hub uploading data to server,
default time is 60s.
Server IP: the IP address of server
Server Por: the port of server

Other operation and setting

WIFI setting: connect the smart hub WIFI.

AP setting: modify the name and password of hotspot.

Modify password: Modify the password of hub.

Add accessories
Turn on pairing mode, activate the sensor to send a signal to the hub, you
will hear a beep when the piaring is successful.

Sharing the device
User could easily share the device with your loved ones by scanning the
QR code.

Reset
Press the pairing button for 5s to reset to default setting and succeeded with
a long beep. After the reset, all accessories and WIFI information will be
cleared.

The remote control is easy to carry, it can be used to set the system to
Arm/Disarm/Home or activate an alarm at touch of the SOS button.
You can also remote arm/disarm/bypass the system using smartphone
APP.

Arm: All zones/sensors are armed
Disarm: All zones / sensors are under the disarmed status, except the
zones / sensors which is under 24-hours Arm mode.
Home (bypass): All the zones/sensors are armed except the home mode
sensors.

Contact Sensor (ZEM-1004)

The window/door sensor can be installed on doors, windows, and any
other objects that can open and close. The sensor transmits signals to
the control panel when a magnet mounted near the sensor is moved
away.

Installation method: choose a proper way in your door/window, we suggest
you do not mount the sensor on the door/window which made of metal,
because it willl interfer the signal and shorten the distance of receive the
signal. Clean up the place you want to mount the contact sensor, tear the
tape.

PIR Motion Sensor (ZEM-1005)

The detector adopts digital logic control processing technology and
intelligent analysis algorithm, effective resolution of interfering signal
and human movement signal, preventing false alarm. It features
automatic temperature compensation, and resistance to flow
technology, adapting to environmental and temperature change. It can
detect human movement within the 6-meter cone space, suitable or halls,
hallways, etc.

Maintenance

The following suggestions will help prolong the service life of the system.

1. Keep this product and accessories out of children’s reach.

2. Keep the product and accessories dry. Rainwater, moisture and liquids
are likely to contain minerals that will corrode electronic circuits.

3. Do not use or store the system in dusty or dirty places, otherwise it may
damage the electronic components.

4. Do not expose the system to high temperature. High temperatures can
shorten the life of electronic components, damage batteries, and cause
melting deformation of plastic parts.

5. Do not store the system in cold areas. Otherwise, when the temperature of
the alarm system rises to the normal level, moisture appears inside,
damaging PCB.

6. Test the system regularly and perform troubleshooting in time.

7. Check the built-in batteries of accessories regularly. If the batteries are
low, replace with new ones.

8. It is recommended to cut off the power if the system is not used for long
time.

9. If the alarm system is covered with dirt, wipe off the dirt with soft cloth or
tissue. For stains, apply diluted alkaline detergent to soft cloth, wring the clot
out and wipe the product. Then, dry the product with dry absorbent cloth.

Please carefullly read and strictly follow the previous suggestions. If the
product remains faulty, you can send it to the place of purchase or authorized
maintenance center for maintenance. We will provide help as soon as
possible.

Find the WIFI hotspot emitted by the smart
hub whose name starts with “SAxxx”, the
default password is 12345678

Note: After paired successfully, the smart
hub will stop beeping

Fig. 1

“Alexa, tell Blue Dog to disarm”

Definition: This allows you to disarm the system using voice control.

“Alexa, ask Blue Dog state”

Definition: Alexa will be able to tell you what status the alarm is in. For example:
" Alarmed" or "Disarmed".

“Alexa, tell Blue Dog ringing”

Definition: The hub will ring ding dong. This can be used to send an alert around the
house. For example, in the morning the kids are still sleeping upstairs and it is time
to get up for school and breakfast is ready. Then the parents can use this command
to wake up the kids.

“Alexa, tell Blue Dog alarming”

Definition: The hub will sound an alarm. This is used like a panic button feature. If
there is some type of emergency, you can say this command and the alarm will
sound to advise someone in the house that there is something wrong.

“Alexa, tell Blue Dog to mute”

Definition: This will mute the alarm. So, when you have triggered the alarm with the
"Alexa tell blue dog alarm” and you want to turn off the siren, you will use this feature.

Add/Delete/Edit Accessories

Set Up Pairing on Hub

Method 1 (Fig. A): Short press the pairing button on the hub to enter pairing
mode,activate the accessory and succeeded with a beep.

Tap WIFI setting to configure
the WIFI of the hub

Button&LED i ndica tor

Leave messag e here

Open from here

Installation method: mounting the motion sensor on the wall with the bracket and
screws,the recommended installtion height is between 1.8m to 2.7m.or just put it
on the ground,table or other plat places.

Mounting the doorbell push button on the outside of your door
with the included adhesive tap