Thank you for choosing the ZelHer P30a Bluetooth
headset, please examine the contents of the package to
ensure that you have received all items, please read the
entire full user guide before using the headset.
PACKAGE CONTENTS
2
User Guide for P30a
KEY SPECIFICATIONS
Model P30a
• Bluetooth v4.1
• 26 Hours: Talk Time
• 750 Hours: Standby time
• Enhanced Battery Saver (EBS) Extending batteryli ve up to 8 months
• Working Range: 33ft
• Multipoint Support: (Pair and keeps connections with 2 Bluetooth devices)
(HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video
Remote Control Profile (AVRCP)
ENGLISH
3
ENGLISH
ABOUT YOUR ZELHER P30a
22 Multifunction Button
3
4 USB Charge slot
1
4
4
1 Volume Up
Volume Down
3 Indicator LED
GETTING STARTED
• It is important to fully charge the headset, before
starting the pairing process before initial use.
• Recommended Initial charge time is 3-5 hours.
• Do not use the headset while charging.
Note:
• If you do not use your headset for a long period of time,
it is recommended to recharge the headset for at least 3-5
hours before resuming use.
• Recharge unit in places at room temperature between
41°F (5°C) and 104°F (40°C).
ENGLISH
5
ENGLISH
CHARGING THE HEADSET
1. Connect the large end of the USB cable into charger
2. Connect the small end of the USB cable into headset
3. Plug the charger into a proper outlet.
4. While charging, the indicator light on headset will
To Charge the unit:
port.
charging port.
turn red, when charging is complete; the indicator light
will change to blue, flashing once every 10 seconds.
6
Turning on:
Press and hold the Multi-function button (MFB) for 3-5
seconds, the blue light indicator will flash 3 times, and
you will hear a voice prompt saying “Power on”.
Turning off:
Press and hold the MFB for 3-5 seconds; the red light
indicator will flash 3 times, and you will hear a voice
prompt saying “Power off”.
PAIRING THE HEADSET:
Pairing to 1 device
1. Press and hold the MFB for approximately 6-8
ENGLISH
7
ENGLISH
seconds, until the LED light alternates between red and
2. Activate the Bluetooth search feature on your phone;
3. Select the P30 from the list of devices detected on
4. If necessary enter pin code 0000 and accept
5. When pairing is complete, you will hear a voice
blue, you will hear a voice prompt saying “pairing”
indicating that it is in pairing mode.
refer to your phone’s manual for further instructions.
your phone or computer.
connection.
8
prompt saying “your headset is connected” and the LED
will flash blue indicating that your Bluetooth headset is
connected to your phone.
Pairing a 2nd Device:
1. Pair the first phone following the steps above.
2. Temporarily turn off the first connected
phone’s Bluetooth wireless technology function.
3. Pair the second phone using the steps above.
4. Turn off the headset, and once again turn on the first
phone’s Bluetooth wireless technology functionality.
ENGLISH
9
ENGLISH
5. Once again turn on the headset, and it will reconnect
to both devices automatically.
GENERAL FUNCTIONS:
Turning on:
Press and hold the MFB for 3-5 seconds; the blue light
indicator will flash 3 times and you will hear a voice
prompt saying “Power on”. The headset will
automatically attempt to connect with the last device to
which it was paired. Once connected, you will hear a
voice prompt saying “your headset is connected”, and
the blue light will blink once every 10 seconds.
10
Turning off:
Press and hold the MFB for 3-5 seconds; the red
light indicator will flash 3 times and you will hear
a voice prompt saying “Power off. Your headset
is disconnected”.
Whenever your Bluetooth gets disconnected from
other Bluetooth devices, a voice prompt will say “Your
headset is disconnected”.
When Bluetooth gets disconnected, the Enhanced
battery saver (EBS) mode will automatically turn on.
ENGLISH
11
ENGLISH
Adjust the volume:
Press Volume + or – while on a call or streaming audio.
Incoming call / Ending a call:
Simply Press the MFB once.
Reject a call:
Press and hold MFB for 3 seconds.
Redial:
Press the MFB twice.
Voice dial /Voice Control:
Press the MFB for 2 seconds and wait for the phone
12
prompt for voice dialing and other voice controls
Voice control feature will use the last paired device, for
example if you pair device A and device B the voice dial
will jump to device B.
Mute On/Off:
Press and hold the (-) volume button for 2-3 seconds
and a voice prompt will say “Mute on.” To unmute,
Press and hold (-) volume button again for 2-3 seconds
and a voice prompt will say “Mute off”.
You will hear a double beep every 15 sec. while your
Bluetooth is on mute.
ENGLISH
13
ENGLISH
Play Audio:
Press and hold the (+) volume button for 2-3 seconds to
turn on your audio. Press and hold again the (+) volume
button for 2-3 seconds to turn off.
Wearing the Headset:
This headset can be worn on either ear and can be
adjusted according to your preference and comfort.
Low Battery Warning:
When battery will reach to only 10% of power, the
indicator light will begin to blink red and you will hear a
voice prompt saying “low battery” every 30 seconds.
14
Enhanced Battery Saver (EBS):
Extending battery live up to 8 months
When Bluetooth power is on without being connected
to any paired Bluetooth device, the blue light will start
to blink twice every 5-6 seconds for approximately 10
minutes, signaling that device will automatically turn
off after 10 minutes of not getting any paired Bluetooth
connection.
Keep your Battery alive:
• For ideal charge capacity and extended battery life, do
not overcharge your Bluetooth headset; wait until you
get the Low battery warning signal.
ENGLISH
15
ENGLISH
• Make sure to keep this product within the
recommended temperature range of -4°F (-20°C)
and 104°F (40°C).
Getting out of 32 feet distance:
When your Bluetooth headset gets out of the 32 feet
distance from your other Bluetooth device, you will
hear a double beep every 10 seconds signaling that you
are out of the 32 ft. range, after 10 minutes of being
out of range, your device will automatically revert to
EBS mode.
16
Headset Storage:
• Only use original accessories with this device.
• Do not disassemble headset, it will void the warranty.
• Store headset away from dust, heat, and water.
• Use clean, soft, static free cloth to clean headset
surfaces.
• Do not allow children to play or use headset.
• Do not store headset or charger in extreme
environments.
ENGLISH
17
ENGLISH
Fifth Avenue Accessories Corp.
Limited Warranty
All Zelher Bluetooth headsets carry a one year limited warranty, from date
of purchase.
Fifth Avenue Accessories Corp. Warrants this headset will be free from
defects in materials and workmanship for a period of one ye ar from the date
of purchase.
During the first year, we will at our option, repair or replace this product or
any defective parts, free of charge.
Consumable components subject to normal wear and tear, s uch as
microphone windscreens, ear cushions are not included in this one-year
warranty.
We recommend that you keep the original shipping mate rials, as it is
important t hat the product will not be damaged during shipping.
18
To obtain Warranty Service, please contact us at warranty@zelher.com or by
calling 866-783-4546.
The following information must be presented to obtain Warranty Service,
(1) Proof of purchase, which clearly indicates the name of the dealer, the
product ty pe, the date of purchase, name and address of purchaser, (2) the
Bluetooth headset .
Consumer will be responsible for shipping or transportation charges to us.
Products returned to Fifth Avenue Accessories Corp. For repair under this
warranty w ill be return shipped to the customer at our expense.
The warranty does not cover damage caused by accident, direct and indirect,
misuse or abuse, neglect, improper operation, unauthorized product
modification or repairs, or any cause other t han defects in the mat erials or
workmanship of Fifth Avenue Accessories Corp.’s products.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
ENGLISH
19
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
o Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :1) l’appareil ne doit pas produire de
brouillage;2) l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
- Do not install this equipment in a confined or
building-in space such as a book case or similar unit,
and remain a well ventilation conditions at open site.
The ventilation should not be impeded by covering the
ventilation openings with items such as newspaper,
table-cloths, curtains etc.;
- WARNING: The batteries (battery pack or
batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
- No naked flame sources, such as lighted
candles, should be placed on the apparatus.
- The product is designed to use in moderate
climates
-Correct Disposal of this product. This
marking indicates that this product should not be
disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection systems
or contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
Fifth Avenue Accessories Corp.
P. 866.783.4546
P O BOX 1002,
Harriman, NY 10926
www.zelher.com
info@zelher.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.