Rack Chassis
Get Going Guide
This guide will take you through a typical
installation procedure, and will have you
broadcasting your own HDTV channel
in less than 10 minutes. For additional
assistance or more complex installations,
please refer to the ZeeVee Support page
at www.zeevee.com, where you will nd
answers to frequently asked questions,
and helpful tips from ZeeVee experts.
If you cannot nd the answers you
need, our technical support hot line
at 877-4ZEEVEE (877-493-3833) is
here to help.
Page 2 of 8 www.zeevee.com
HDbridge Rack Chassis Get Going Guide Page 3 of 8
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not
t into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Unplug this apparatus during lightning storms or when unused for long
periods of time.
12. Only use attachments/ accessories specied by the manufacturer.
13. Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Rack Chassis – HDb-RK1
6RU TALL*
8 channels
QUALITY RF WIRING
Compression connectors
LAN WIRING
Customer supplied
DC POWER SYSTEM
Supplies up to 8 modules
AC POWER
Single connection
8 CHANNEL COMBINER
Pre-wired at factory
SINGLE RF CONNECTION
Carries all 8 channels
What’s in the Box
HDbridge Rack Chassis•
Get Going Guide•
34 dbmv launch power for
RF AMPLIFIER
all 8 channels
*with modules installed
Specications
RF Output Output Power +34dBmV typical
Power AC Input +120V, 1.6A
Physical Width 19 Inches
Height 7 Inches (empty)
10.49 Inches (with modules installed)
Depth 10.25 Inches
Weight 11.5 Lb. (empty)
30.5 Lb. (with 8 modules installed)
Temperature/Humidity Operating +32F to +104F (0C to +40C) /
20% to 80%, non-condensing
Page 4 of 8 www.zeevee.com
HDbridge Rack Chassis Get Going Guide Page 5 of 8
Installing an HDbridge ModuleInstalling an HDbridge Module
Step 1 - Locate an available RF
cable connector and DC power
connector, and remove the
protective plastic sleeves.
Step 2 – Orient the HDbridge
module with the coax output at
the top and power input at the
bottom as shown. Insert the DC
power plug into the module.
Step 3 – Align the bottom edge
of the module just inside of the
small lip on the chassis.
Step 4 – Push the back of the
module down until it sits at in the
chassis.
Page 6 of 8 www.zeevee.com
HDbridge Rack Chassis Get Going Guide Page 7 of 8
Installing an HDbridge ModuleInstalling an HDbridge Module
Step 5 – Locate the thumbscrew
in the upper portion of the middle
bracket behind the module, just
under the lip. Tighten the thumbscrew into the module until it is
snug.
Step 6 – Attach the cable to the
RF output connector on the
module. Be sure to tighten the
connection properly.
Step 7 – Connect the chassis
RF output into your cable
infrastructure, as needed.
Your HDbridge modules are now ready to be connected to your video source.
Refer to your HDbridge Module Get Going Guide for instructions on how to
congure each module.
Contact ZeeVee
For support, repairs, and warranty service
. . . . . . . . . . . . . . . . . . . . . . . . 877-4ZEEVEE (877-493-3833)
For purchasing and sales inquiries
. . . . . . . . . . . . . . . . . . . . . . . . 978-633-ZVHD (978-633-9843)
Warranty
Limited One Year Warranty
ZeeVee warrants your Rack Chassis against defects in materials and
workmanship for a period of one year from the date of purchase.
Visit www.zeevee.com for complete warranty details.
To Get Warranty Service
Warranty service will be provided by ZeeVee. If you believe you need service
for your Rack Chassis, please contact ZeeVee directly by calling ZeeVee
Support at (877) 493-3833. If it is determined that the product needs to be
returned for service or exchange, you will receive a Return Material Authorization (“RMA”) number. Our agents will help you through the process through
which you can return the product. ZeeVee is not responsible for Customer
products received without an RMA number and may reject such products.
To Get Out-Of-Warranty Service
To obtain out-of-warranty service for your Rack Chassis please call ZeeVee
Support at (877) 493-3833 for information on the possibility of and any costs
for repair or replacement of out-of-warranty products. No agent, company,
dealer, distributor, or person is authorized to change, modify, or extend the
terms of these warranties in any manner.
ZeeVee, Inc. • One Monarch Drive • Littleton, MA 01460 • info@zeevee.com
rev.2
Loading...