ZeeVee 2500, 2600 User Manual
HDbridge 2500/2600
SERIES
CONFIGURATION GUIDE
HDb2520-EU • HDb2540-EU • HDb2620-EU • HDb2640-EU
EU
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
Important Safety Instructions. Save These Instructions.
WARNING: When using electronic products, basic precautions should always be followed, including:
1. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this apparatus near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including
ampliers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
FCC Statement
FCC Compliance and Advisory Statement: This hardware device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE THE COVER (OR BACK).
NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
undesired operation. This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed or used in accordance with the instructions,
may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures: 1) reorient or
relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3)
connect the equipment to an outlet on a circuit different from that to which the receiver is connected;
4) consult the dealer or an experienced radio/TV technician for help. Any changes or modications not
expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment. Where shielded interface cables have been provided with the product or specied additional components or accessories elsewhere dened to be used with the installation of the product,
they must be used in order to ensure compliance with FCC regulations.
9. Power cord must be accessible to allow for the removal of power
from the unit.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Unplug the apparatus during lightning storms or when unused for
long periods of time.
12. Only use attachments/accessories specied by the manufacturer.
13. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
14. WARNING: To reduce the risk of re or electric shock do not
place this apparatus in a position where it is exposed to dripping
or splashing liquids, rain, moisture, or excessively high humidity.
Objects containing liquid shall not be placed in proximity to the unit
such that they present a risk of spillage onto the apparatus.
Page 2 | HDbridge 2500/2600-EU Configuration Guide www.zeevee.com
Welcome to ZeeVee.
Table of Contents
ZeeVee products convert your video and audio source to
a digital cable channel and broadcast it over coax to all
your HDTVs. This guide walks you through basic and more
enhanced setup for ZeeVee’s HDbridge 2500/2600 Series
modulators.
For support, repairs, and warranty service contact the
distributor where you purchased the product. For additional
questions call +1(877) 4-ZEEVEE (1.877.493.3833).
What’s in the Box
Here’s what you can expect to nd when you open the package:
ZeeVee Modulator
Hydra Audio/Video Cables
x2 with HDb2620 and HDb2520
x4 with HDb2640 and HDb2540
Front and Back Panels ..........4
Basic Installation ...............5
Beginning setup ..............5
Tuning your channel at
the HDTV (Auto Scan) ..........5
Front Panel Conguration ..... 6-7
Setting the RF broadcast
channels or power ............6
CCIR Table vs Frequency Map ...7
Maestro Conguration ........ 8-9
Connecting with Maestro .......8
Conguring RF numbers
and virtual channels ...........8
Labeling channels with channel
and content information ........8
Using other Maestro tabs .......9
Troubleshooting ..............10
Available Separately
Warranty .....................11
Declaration of Conformity ......12
Contact ZeeVee ...............12
Power Cord
HDbridge 2500/2600-EU Configuration Guide | Page 3
Front and Back Panels
Model Number Name and description of unit
Color Display Displays conguration and system
5-Way Control Navigate options on front panel
Coax Output Up to 2 paired, frequency-agile
Audio/Video
Inputs
10/100 LAN Port Two symmetrical Ethernet ports
A/C Power Input 100-240VAC / 50-60Hz
status
display
DVB-T/C RF CATV output channels
for up to 4 video sources. Output
power can be set between +45 to
+25 dBmV using the Maestro web
interface or the front panel.
Full size DIN connector for A/V input
for conguration and remote
management
Cables and their Connectors
Composite Video for
Teletext Only
Digital Audio
Analog Audio
Component Video
Analog Audio
3.5mm Connector
VGA Connector
Hydra A/V Cables
Hydra VGA A/V Cables
(Sold separately)
Page 4 | HDbridge 2500/2600-EU Configuration Guide www.zeevee.com
Loading...