Zeeva Electronics Private MA 3040 User Manual

Thank you for trusting MUVEACOUSTICS with delivering
you excellence in sound. We encourage you to connect
with us and become a part of our community!

SCAN THE QR CODE YOU WILL FIND INSIDE. SHARE
WITH US YOUR PRODUCT EXPERIENCE.

USER MANUAL AND WARRANTY

MA-3040

JOIN THE COMMUNITY

SIGN UP to receive
∙ Special Offers!
∙ Access to Events!
∙ Contests!
∙ News on new products launched

www.muveacoustics.com/community

Bluetooth Connection

This product has Bluetooth wireless technology. It is
compatible with Bluetooth wireless equipped computers,
smartphones and MP3 players.

To use Bluetooth for you audio connection pair TAO with your
audio source (music player, smartphone, laptop or other
Bluetooth equipped device that can act as audio source). First of
all, take out the TAO earbuds from the charging case for power
on and go to pairing mode. Then the Bluetooth feature is
enabled on your mobile device in order to search for available
devices. In a few moments ‘MUVEACOUSTICS:TAO’ will appear
on your list of possible Bluetooth connections. Press ‘pair’ or
‘connect’ on your device and when the connection is made, you
can hear “your device is connected”.

The period of Bluetooth pairing is about 90 seconds. If there is no
pairing, TAO will shut off automatically after 10 minutes.

From now on, when you turn on TAO, it will automatically search
for the last Bluetooth device it was paired with.

To pair with another device, you should shut off both earbuds
and disable the Bluetooth connection of your device. Then turn
on the earbuds and repeat pairing procedure for another device.

MUVEACOUSTICS ONE-YEAR LIMITED WARRANTY

MUVEACOUSTICS TAO earbuds have been subjected to a
thorough series of tests to ensure the highest level of
dependability. It is unlikely that you will experience any problem,
but if a defect should become apparent during the use of this
product, MUVEACOUSTICS warrants to the original purchaser
that this product will be free from defects in material and
workmanship for a period of 12 months from the date of your
original purchase from an authorized dealer. If a defect covered
by this warranty occurs, MUVEACOUSTICS, at its option, will
repair or replace the product purchase at no repair charge
(postage charges will apply). If a replacement is necessary and
your product is no longer available, a comparable product may
be substituted at the sole discretion of MUVEACOUSTICS.

This warranty does not cover normal wear and tear, abusive use
or misuse, modification, tampering or by any other cause not
related to either materials or workmanship. This warranty does
not apply to product used for any industrial, professional or
commercial purposes.

CUSTOMER SERVICE

For any service or technical queries, please contact our
service team on the below email.

Email: [e-mail]

Keep all relevant information for future reference

Imported and distributed by
Zeeva Electronics Private Limited.
All rights reserved.

901-902, Trade World C wing
Kamla Mill Compound,
Senapati Bapat Marg,
Lower Parel West,
Mumbai-400013

FCC Statement

NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

-

Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
interference that may cause undesired operation.

Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.

including

FCC ID: 2ANVW-MA-3040

1936032

Warning And Cautions for the charging case and earbuds:

Do not fully submerge in water. The earbuds are IPX5 water

1.
resistance only.
Keep the earbuds and charging box clean and dry for

2.
storage and charging. Avoid dusty, damp, and dirty
environments. Using the device in these environments may
damage the circuitry.
Do not use the device during thunderstorms to avoid any

3.
lightning-related damage or injury.
Only charge or use the device at ambient temperatures

4.
between 0 deg °C/ 32 deg °F and 45 deg °C/ 113 deg °F.
Keep the device away from excessive heat sources and direct

5.
sunlight. Do not throw it into fire or in heating devices, such as
microwave ovens, stoves or radiators. The device may even
explode in extreme overheating circumstances.
Do not store device in enclosed vehicle.

6.
Do not attempt to disassemble or remanufacture the device,

7.
insert foreign objects into it, or immerse or expose it to water
or other liquids. Doing so may lead to fire, explosion or
other hazards.
Do not attempt to burn the device as it may explode.

8.
Dispose of the device in accordance with local regulations.

9.
Do not dispose of the device in normal household waste.
Improper device disposal is dangerous and could cause an
explosion. Please respect local laws on the disposal of
electronic products and their accessories and support
recycling efforts.
Keep the device out of reach of children and pets to prevent

10.
them from accidentally swallowing and choking on the small
parts of the device. Biting or swallowing the device could lead
to serious injury.
Do NOT allow small children to use the earbuds.

11.
Do not drop, squeeze, or pierce the device. If excessive

12.
pressure is applied to the device, the device may short-circuit
or overheat.
When the device is being charged, make sure the power

13.
source is close to the device and easy to reach.
When the device is fully charged, disconnect

14.

the charger
from the device and unplug the charger from the power
outlet. Do not leave charging overnight.
Do not use the charging case in excess of its output rating.

15.
Use caution and follow applicable laws regarding mobile

16.
phone and headphones use if using the earbuds for phone
calls while driving. Some jurisdictions impose specific
limitations, such as single ear piece configuration, on the use
of such products while driving. DON’T use the earbuds for any
other purpose while driving.
Do not use a charging case that is damaged or modified.

17.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury to persons.
Do NOT use the earbuds at a high volume for any

18.
extended period.
To avoid hearing damage, use your earbuds at a comfortable,

­moderate volume level.
Turn the volume down on your device before placing the

­earbuds in/on your ears, then turn the volume up gradually
until you reach a comfortable listening level.
Please note that we won’t take any responsibility for any

19.
wrong operation (eg. Voltage higher than 5V) as this may
result in severe injury or loss of property and we cannot
control the operating process during the time the user using
this product.
In extreme cases, abuse or misuse of Lithium battery pack

20.
can lead to explosion, heat generation, fire development or
smoke development.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.

Before your first use, please insert the earpbuds into the charging case and
connect the micro USB cable provided to the charging case and to a USB
power source. It takes about 2-2.5 hours for a full charge.

Earbuds

Bluetooth Sync Indicator

White LED lights up during charging and it will turn off once fully charged.

Power / Multifunction Button (MFB)
For power on:

∙ When the earbuds are inside the charging case (being charged or fully
charged): Take the earbuds from the charging case, both earbuds
switch on automatically and you can hear “power on”. Then, they will
connect to each other automatically and you can hear “connecting”.
Or
∙ When the earbuds are off (outside charging case): Press the MFB of
both earbuds for 2 seconds to turn the earbuds on.

Pairing the earbuds with a Bluetooth device

∙ Take both earbuds out of the charging case and insert them into your
ears. The distance between left and right earbud should not exceed
50 cm otherwise there may be problem in connecting each other.
∙ You will hear the voice prompt “power on”, “connecting” and “pairing”
from both left and right earbud. The earbuds are in pairing mode now.
The LED of the right earbud is flashing in blue and white.

∙ Activate the Bluetooth feature of your Bluetooth device.
∙ Select the ‘MUVEACOUSTICS:TAO’ from the list of found Bluetooth

devices. If pairing was successful, you can hear the voice prompt “your
device is connected” from right earbud. Then the LED of the earbud
turns off.
If there is no connection is made within 90 seconds, pairing mode is
terminated and the earbuds will turn to idle mode. Please turn off
the earbuds and repeat the pairing procedure if necessary.

For power off:

∙ Place both earbuds into the charging case. They will turn off
automatically and also be recharged.
Or
∙ You can also press and hold the MFB of any earbud for 4 seconds.
Both earbuds will turn off and you hear “power off”.

Play / Pause

Music playback pauses when you press the MFB of any earbud once
and resumes when you press once again.

Volume Up

Double press the MFB button of the right earbud.

Next Song

Press and hold the MFB of the right earbud for 1 second and hear the
tone notification.

Volume Down

Double press the MFB button of the left earbud.

Previous Song

Press and hold the MFB of the left earbud for 1 second and hear the
tone notification.

Voice Assistant

Triple click the MFB of either left or right earbud to activate the voice
assistant feature of your Bluetooth device. Voice assistant functions vary
depending on your phone, tablet or application.

Receive a phone call

Press the MFB once of either left or right earbud.

End a phone call

Press the MFB once of either left or right earbud.

Refuse a phone call

Press and hold MFB for 2 seconds of either left or right earbud.

Reset earbuds to factory settings

When there is problem in connecting the earbuds to each other, turn off
the earbuds, then press and hold the MFB simultaneously for 10 seconds.
You can hear the voice notification of “reset”. The earbuds are reset to the
factory settings. All pairing information is deleted. Then put the earbuds
in the charging case for next use.

Charging Case *

1

When the power of the earbuds is low, you can hear “battery low” every
2 minutes. Please re-charge them by placing them in the charging case
otherwise they will turn off automatically after some minutes.
Charging case is also a storage for the earbuds.
∙ Use the micro USB cable provided with this device for connecting
USB power source to the charging case in order to charge up
the built-in battery of the charging case.
∙ The input voltage to the charging case is DC 5V and minimum 1A
current capacity. In order to charge the device in safe manner and
reliable conditions, please only adopt certified appropriate
charger / adapter for charging.
∙ The white LED indicators are flashing while the charging case is being
charged. All of them will be always on when the charging case
has been fully charged.

Indication of power level of built-in battery of charging case

∙ White LED of both earbuds lights up during charging and it will
turn off once fully charged.
∙ You can charge the earbuds as long as the charging case still has
power, no matter the charging case is being charged or not.
∙ You must charge the charging case and earbuds if they have not
been used for more than 6 months.
∙ When the charging case is not being charged and you want to check
the power level of it, please take out the right earbud from the
charging case or put the right earbud back into the charging case.
The LED indicators of the charging case show the power level of the
built-in battery for 3 seconds.

Power level of
built-in battery

0 - 25 %

25 - 50 %

LED statusLED status

100 %

Power level of
built-in battery

50 - 75 %

75 - 99 %

Operational Guidance

Function

Play / pause
Increase volume
Decrease volume

Previous song

Next song

Answer / end a call
Refuse incoming call
Voice assistance *

Please Note:

1. TAO earbuds come with a lithium-ion polymer battery.
For best results, fully charge TAO earbuds before use. It will take 2 – 2.5 hours
to fully charged.
Place the earbuds in the charging case before you start charging.
To charge, plug the micro USB cable into charging case and plug the standard
USB connector into your DC5V USB power source.
You can also charge the earbuds as long as the charging case still has power
(without connecting to USB power source).
The charging case can be charged up individually and can be used for
charging the earbuds later.

2. Voice assistant functions vary depending on your phone, tablet or application.

3. TAO earbuds is rated at IPX5 waterproof and true wireless.

4. Charging case is not a waterproof device.

Button

Press MFB on either one of the earbuds once
Press MFB of the right earbud twice
Press MFB of the left earbud twice

Press and hold MFB of the left earbud for 1 second,
with tone notification

Press and hold MFB of the right earbud for 1 second,
with tone notification

Press MFB on either one of the earbuds once
Press and hold MFB on either one of the earbuds for 2 seconds

2

Triple click MFB on either one of the earbuds