Zeeva Electronics Private MA 2100 User Manual

Thank you for trusting MuveAcoustics with delivering
you excellence in sound. We encourage you to connect
with us and become a part of our community!

SCAN THE QR CODE YOU WILL FIND INSIDE. SHARE
WITH US YOUR PRODUCT EXPERIENCE.

USER MANUAL AND WARRANTY

JOIN THE COMMUNITY

SIGN UP to receive
∙ Special Offers!
∙ Access to Events!
∙ Contests!
∙ News on new products launched

www.muveacoustics.com/community

Bluetooth Connection

Devices with Bluetooth 4.2 wireless technology or above,
such as Bluetooth wireless technology equipped computers,
smartphones and MP3 players.

To use Bluetooth for your audio connection pair A•Star with
your audio source (music player, smartphone, laptop, or other
Bluetooth equipped device that can act as audio source). First
press and hold the Power / Multifunction Button (MFB) for
three seconds until you hear the tone to turn the power on.
Once the power turns on the A•Star is in pairing mode. The
blue Sync LED will blink slowly and then flash quickly. Make
sure Bluetooth is enabled on your audio source, search for
available devices and in a few moments “Muve Acoustics: A
will appear on your list of possible Bluetooth connections.
Press “pair” or “connect” on your device and when the connection
is made the blue led will stop to blink and you can hear 1 sec.
flat tone.
Your device is paired.

From now on, when you turn on A•Star, it will automatically
search for the last Bluetooth device it was paired with.
To disconnect and pair with another device, double click quickly
the Power / Multifunction Button (MFB) to come back to the
pairing mode and repeat the procedure with another device.

Wired Connection

A•Star has a standard 3.5mm audio cable. If there is no Bluetooth
source available or if you simply prefer a wired connection, you can
connect your A•Star directly to your audio source using the stereo
male 3.5mm connector at the end of the cable.

This device has been tested and complies with part 15 of the FCC rules.
FCC ID: 2ANVW-MA-2100

MUVEACOUSTICS ONE-YEAR LIMITED WARRANTY

MUVEACOUSTICS A∙Star speaker have been subjected to a thorough
series of tests to ensure the highest level of dependability. It is unlikely
that you will experience any problem, but if a defect should become
apparent during the use of this product, MUVEACOUSTICS warrants
to the original purchaser that this product will be free from defects in
material and workmanship for a period of 12 months from the date of
your original purchase from an authorized dealer. If a defect covered
by this warranty occurs, MUVEACOUSTICS, at its option, will repair or
replace the product purchase at no repair charge (postage charges
will apply).
If a replacement is necessary and your product is no longer available,
a comparable product may be substituted at the sole discretion of
MUVEACOUSTICS.

This warranty does not cover normal wear and tear, abusive use or

”

*

misuse, modification, tampering or by any other cause not related to
either materials or workmanship. This warranty does not apply to
product used for any industrial, professional or commercial purposes.

CUSTOMER SERVICE

For any service or technical queries, please contact our service
team on the below email.

Email: [e-mail]

Keep all relevant information for future reference

Distributed by
Zeeva International Limited.
All rights reserved.

Suite 1006C-8, 10th Floor,
Exchange Tower, 33 Wang Chiu Road,
Kowloon Bay, Hong Kong

www.zeeva.com

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

-

Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

Caution

Changes or modifications not expressly approved by the party responsible for the
compliance could void the user’s (or your) authority to operate the equipment.
Avoid storage in extreme heat or cold. Avoid extreme temperatures and high
humidity. The product’s working temperature range is -35°C to 60°C (-31°F to 140°F).

The input voltage to the product is 5V 0.5A.
In order to charge the product in safe manner and reliable conditions, please
only adopt certified appropriate charger / adapter for charging the product.
Only charge the product at ambient temperatures between 10 deg °C / 50 deg °F
and 40 deg °C / 104 deg °F.
Do not heat above 70 deg °C / 158 deg °F, eg. Do not expose to sunlight or throw
into fire.
Switch off the product after use.
Please note that we won’t take any responsibility for any wrong operation (eg.
Voltage higher than 5V) as this may result in severe injury or loss of property, and we
cannot control the operating process during the time the user using this product.
In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion,
heat generation, fire development or smoke development.

USER MANUAL

Microphone

A∙Star has a built-in microphone for phone calls

Rotate & Store

The "Rotate & Store" function wraps the strap around the speaker
with an immediate and simple movement.

Volume Up

Press and hold to increase volume.

Volume Down

Press and hold to decrease volume.

Power / Multifunction Button (MFB)

Press and hold for about 3 seconds to turn the power On / Off.

Play / Pause

You can play and pause your music using the
Power / Multifunction Button (MFB).
To perform this function press and release the button quickly.

Speakerphone

When incoming call ring on your phone you will hear a tone
ringing on your A∙Star speaker. Press and release the
Power / Multifunction Button (MFB) to answer / end a call while
A∙Star is paired with your phone via Bluetooth. Use A∙Star
integrated microphone to speak.
Press and hold the Power / Multifunction Button (MFB) for 2
seconds to refuse an incoming call.

USB Port

Micro USB port for charging A∙Star.
(Charging cable is included)

3.5mm Audio Cable

Standard not retractable audio cable for use without Bluetooth.

X

Battery Level

When the battery voltage is low, white LED light up with sound beep.
When the battery voltage is very low, device will shut down automatically.
White LED light up during charging and it will turn off once fully charged.

Please Note:

A∙Star comes with a lithium-ion polymer battery.
For best results, fully charge A∙Star before use. It will take 2-2.5 hours
to fully charged.
To charge, plug the micro USB cable into A∙Star and plug the
standard USB connector into your power source.
While A∙ Star is power off and charging the power LED will be solid white.

Please Note:

A∙Star offers audio feedback when you use controls.
When you hear the tone A∙Star is performing the function you’ve initiated.
Functions that include audio feedback:
∙ Power On / Power Off
∙ Bluetooth pairing available
∙ Bluetooth pairing completed
∙ Incoming phone call

A∙Star is a IPX 6 waterproof portable speaker.

Function Button Audio LED

OFF MODE Charging

OFF MODE Charging (Fully charged)

Battery Low

Pairing

Pairing Success

Disconnect

Power ON

Power OFF

Function Button Audio LED

Pick Call

End Call

Refuse Call

Play music

Pause music

Incoming call > Short press MFB once

Talk mode > Short press MFB once

Incoming call > Hold MFB 2s

Pause mode > Short press MFB once

Music mode > Short press MFB once

N/A

N/A

N/A

Double click MFB

N/A

Double click MFB

Off mode > Hold MFB 3s

Any mode > Hold MFB 3s

N/A

N/A

short beep

short beep

short beep

short beep

short beep

short beep

ring tone

short beep

short beep

N/A

N/A

Steady White on

White LED turn off

Steady White on

Blinking BLUE

Steady BLUE

Blinking BLUE

Blinking BLUE

LED is off

Steady BLUE

Steady BLUE

Steady BLUE

Steady BLUE

Steady BLUE