24Nov16
50mm
BLUETOOTH
CONVERTER
USER MANUAL
86mm
ITEM# SS27-BTA-TAITEM# SS27-BTA-T
FCC ID: 2ADM5-SS27BTAT
4.2. Pairing Bluetooth Converter
to a mobile phone or other device
1.
Keep the distance between your Bluetooth
Converter and mobile phone
(or other devices) within 33 Feet.
2.
Power on the Bluetooth Converter.
Press and hold the multi-function button for
3.
6 seconds. The LED indicator flashes
blue & red to indicate pairing mode.
4.
Activate the Bluetooth function on your mobile
device and select “Bluetooth Adapter”
to pair. The LED indicator turn blue if pairing
has been successful.
Contents
Introduction
1
Package Contents
2
Package Diagram
3
How to use
4
4.1 General Functions
4.2 Pairing
4.3 Charging
Product Specifications
5
FAQ
6
FCC Statement
7
Warranty
8
4.3.Charging your Bluetooth Converter
Use the Micro USB cable provided with
this product. Connect the Micro USB plug to
the Micro USB charging port on the product
positioned at in the product diagram on
page 2. Connect the USB plug to a USB port
on a computer or wall adapter to activate
charging. The LED will turn red while charging,
the light will turn off once fully charged.
**Make sure to keep the Bluetooth Converter charging
for a minimum of 3 hours before initial use.
USB Plug Micro USB Plug
Warning:
You must select a qualified charger from
a regular manufacturer.
You must charge the Bluetooth Converter
if it has been not used for more than 12
months.
1
2
2
3
3
4
5
6
7
7
8
1. Introduction 2. Package Contents
Congratulations, and thank you for
choosing the Bluetooth Converter. This
manual will help you operate the Bluetooth
Converter, but you should first familiarize
yourself with the Bluetooth functionality of
your mobile phone or other device before
using the Bluetooth Converter.
Safety Rules
Please follow the rules depicted in this
1
manual closely to ensure your safety.
Before using this Bluetooth Converter we
would strongly encourage you to read
through this user manual.
Be wary of any edges, uneven surfaces,
2
metal parts, accessories and its packaging
to prevent any possible injury or damage.
Do not modify, repair or dismantle this
3
Converter. Doing so may result in fire,
electric shock, complete breakdown of this
Bluetooth Converter, etc. All of which are
not covered under warranty.
4
Do not use any diluent or volatile liquid
to clean the Bluetooth Converter.
Do not use the Bluetooth Converter in a
5
hazardous location.
Bluetooth
Converter
3. Package Diagram
3.5mm Jack
Connector
Volume Down
(Previous track)
Multi-function
Button
Volume Up
(Next track)
LED Indicator
Instruction
Manual
Microphone
1
5. Product Specifications 8. Warranty7. FCC Statement
Bluetooth Converter Specifications
Bluetooth Version
Battery
Charging Time
Music Playtime
Talk time
Operating Range
6. FAQ
1. Why is there no power even when the Bluetooth
Converter are turned on?
Ans: Ensure the battery has been charged up to
3 hours for initial use.
2. There is no sound during playback.
Ans: Check the connection between the Bluetooth
Converter and the phone or computer, if the
connection is not established, please connect
again. Make sure the Bluetooth Converter are
paired with your Bluetooth enabled device.
4.2
55mAh Lithium
1 hour
2 hours
2 hours
33 feet
4. How to use
4.1.General Functions
Desired
Micro USB
Cable
Clip
Micro USB Port
Result
Power On/
Power Off
Volume
Control
Switch
Tracks
Pairing
Charging
Answering
a Call
End a Call
Press and hold the multi-function button
for 3 seconds until the LED light turns
blue.
Press + / - for volume control.
Long press + / - (3 seconds)
to switch track.
Use a Bluetooth function mobile
phone or other Bluetooth master
device to perform necessary pairing
actions.
Plug the Micro USB cable into
the charging port.
When you receive a call, press the
multi-function button once to accept
the call, or answer the call normally via
your mobile phone.
Press the multi-function button once
to end the call or hang up your
mobile phone.
2 3
Required Action
4 5 6 7 8
Loading...