Page 1
BT OCTAVE HP AST
INSTRUCTION MANUAL
1 Introduction································
2 Packaging Contents·····················
3 Connection Diagram·····················
4 How To Use·······························
4.1 General Function···················
4.2 Pairing To Mobile Phone··········
4.3 Charging Your Product············
5 Product Specification···················
6 FAQ·········································
Statement··································
7 FCC Statement···························
2. Packaging Contents 4. How to use1. IntroductionTable of contents
1
2
2
3
3
4
5
6
6
7
8
Congratulations, and thank you for
choosing the Octave Wireless Headphones.
This manual will help you operate the
Octave Wireless Headphones, but firstly
you should familiarize yourself with the
Bluetooth functionality of your mobile
phone or other devices before using
the Octave Wireless Headphones.
Please follow the rules depicted in this
manual closely to ensure your safety.
Before using this Bluetooth headphones,
we would strongly encourage you to read
through this user manual.
Be more wary of any edges, uneven
surfaces, metal parts, accessories and
its packaging so as to prevent any
possible injury or damage.
Do not modify, repair or dismantle this
Bluetooth headphones. Doing so may
result in fires, electric shocks, complete
breakdown of this Bluetooth headphone,
etc. All are not covered under warranty.
Do not use an diluent or volatile liquid to
clean the Bluetooth headphones.
Do not use the Bluetooth headphones in a
hazardous location.
1X Octave Wireless Headphones
Vol+/
Next Song
On / O Button
Vol-/
Previous Song
LED Indicator
Micro USB
Charging port
1
Microphone
1X Micro USB Cable
1X Instruction Manual
Turn on &
Enter the pairing
mode
Pairing
Turn off
Charging
Answering
a Call
Play / Pause
Music
Volume Up/
Down, Next/
Previous Song
Press and hold the On / Off Button
for 3 seconds. After turning on, the
LED indicator flashes red/blue.
Use a mobile phone with Bluetooth
function or other Bluetooth devices
to perform necessary pairing action.
After pairing, the LED indicator turns blue.
Press and hold the On / Off Button
for 3 seconds.
Plug the Micro USB to the Micro
USB port. When charging, the LED
indicator turns red. After full charging,
the LED indicator turns off.
Press On / Off button to answer
phone call, press On / Off button
again to end call.
Press On / Off button to play music
and press it again to pause music.
Short press + Button to advance to next song
Short press - Button to back to previous song
Long press + Button to turn up volume
Long press - Button to turn down volume
4.2. Pairing to Mobile phone or other device 4.3. Charging your headphones
To use your Bluetooth headphones, you must
first pair your headphones with a mobile phone
or other Bluetooth device. Once your Bluetooth
headphones is paired to a specific mobile
phone, they will remain paired and
automatically recognize each other whenever
they are within range.
Turn on your phone and ensure the Bluetooth
function is activated.
Turn on the headphones, enter the pairing mode.
Search your Bluetooth devices on your phone
by following the phone’s instructions. Refer
to your phone’s user manual for more
information.
After a few seconds the phone will list the
“BT OCTAVE HP” as a discover device.
Select it and follow your phone’s instructions
to select this pairing.
Your phone will confirm the pairing, and then
press Yes/Ok.
Finally, select to connect with Octave Wireless
Headphones from your phone.
Use the Micro USB cable accessory
provided with this headphones. Connect the
Micro USB plug to the Micro USB
charging port on the headphones positioned
1
at in headphones diagram on page 2.
Connect the USB plug to a USB port on
a computer or wall adapter to activate
charging.
**Make sure to keep the headphones charging
for a minimum of 6 hours before initial use.
USB Plug Micro USB Plug
headphone
Product Specification
Driver Diameter 40mm
Voltage
turned
initial use.
20Hz - 20KHz
108 dB +/- 3 dB
32 Ohms
Li-Ion Battery
3.7V
60 mAh
≤32.8 Feet
1.5 - 2 Hours
2 Hours
has been charged
Frequency Range
Sensitivity
Impedance
Power Supply
Battery Capacity
Receiver Distance
Charging Time
Playing Time
headphones is
6
Check the connection between
headphones with phone or computer,
if the connection is not established,
please connect again. Make sure
the headphone is paired and connected
with your target phone or other master device.
Safety instructions for the lithium battery and charging the product
-The input voltage to the product is 5V 1A.
-In order to charge the product in safe manner and reliable
conditions, please only adopt certified appropriate charger/
adapter for charging the product.
-Only charge the product at ambient temperatures between
10 deg °C/ 50 deg °F
and 40 deg °C/104 deg °F.
- Do not heat above 70 deg °C/158 deg °F, eg. Do not
expose to sunlight or throw into fire.
-Switch off the product after use.
-Please note that we won’t take any responsibility for any
wrong operation (eg. Voltage higher than 5V) as this may
result in severe injury or loss of property, and we cannot
control the operating process during the time the user using
this product.
-In extreme cases, abuse or misuse of Lithium battery pack
can lead to explosion, heat generation, fire development or
smoke development.
Item# HP-0389
Made Exclusively for Five Below
Distributed by Zeeva International Limited
Suite 1006C-8, 10th Floor, Exchange Tower,
33 Wang Chiu Road, Kowloon Bay,
Hong Kong, China
Made in China
Keep All Relevant Information for Future Reference
7. FCC Statement
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
FCC ID: 2ADM5-HP-0389
Loading...