Zeeva HP0363 User Manual

OFF/ON

DC5V

Date: 20190708
Product: HP-0363

50 mm

COMPASS WIRELESS HEADPHONES
INSTRUCTION MANUAL

86 mm

2. Packaging Contents 4. How to use1. IntroductionTable of contents

1 Introduction································
2 Packaging Contents·····················
3 Connection Diagram·····················
4 How To Use·······························

4.1 General Function···················

4.2 Pairing To Mobile Phone··········

4.3 Charging Your Product············
5 Product Specification···················
6 FAQ·········································
Statement··································
7 FCC Statement···························

OFF/ON

DC5V

1
2
2
3
3
4
5
6
6
7
8

Congratulations, and thank you for
choosing the Compass Wireless Headphones.
This manual will help you operate the
Compass Wireless Headphones, but firstly
you should familiarize yourself with the
Bluetooth functionality of your mobile
phone or other devices before using
the Compass Wireless Headphones.

Please follow the rules depicted in this
manual closely to ensure your safety.
Before using this Bluetooth headphones,
we would strongly encourage you to read
through this user manual.

Be more wary of any edges, uneven
surfaces, metal parts, accessories and
its packaging so as to prevent any
possible injury or damage.

Do not modify, repair or dismantle this
Bluetooth headphones. Doing so may
result in fires, electric shocks, complete
breakdown of this Bluetooth headphone,
etc. All are not covered under warranty.

Do not use an diluent or volatile liquid to
clean the Bluetooth headphones.

Do not use the Bluetooth headphones in a
hazardous location.

1X Compass Wireless Headphones

On / O Button

Micro USB
Charging port

1

1X Micro USB Cable

1X Instruction Manual

Microphone

Turn on &
Enter the pairing
mode

Pairing

Turn off

Charging

Answering
a Call

Play / Pause
Music

Press and hold the On / Off Button
for 3 seconds. After turning on, the
LED indicator around the USB
socket flashes red/blue.

Use a mobile phone with Bluetooth
function or other Bluetooth devices
to perform necessary pairing action.
After pairing, the LED indicator blinks
blue.

Press and hold the On / Off Button
for 3 seconds.

Plug the Micro USB to the Micro
USB port. When charging, the LED
indicator turns red. After full charging,
the LED indicator turns off.

Press On / Off button to answer
phone call, press On / Off button
again to end call.

Press On / Off button to play music
and press it again to pause music.

4.2. Pairing to Mobile phone or other device 4.3. Charging your headphones

To use your Bluetooth headphones, you must
first pair your headphones with a mobile phone
or other Bluetooth device. Once your Bluetooth
headphones is paired to a specific mobile
phone, they will remain paired and
automatically recognize each other whenever
they are within range.

Turn on your phone and ensure the Bluetooth
function is activated.

Turn on the headphones, enter the pairing mode.

Search your Bluetooth devices on your phone
by following the phone’s instructions. Refer
to your phone’s user manual for more
information.

After a few seconds the phone will list the
“COMPASS BT HP” as a discover device.
Select it and follow your phone’s instructions
to select this pairing.

Your phone will confirm the pairing, and then
press Yes/Ok.

Finally, select to connect with Compass Wireless
Headphones from your phone.

Use the Micro USB cable accessory
provided with this headphones. Connect the
Micro USB plug to the Micro USB
charging port on the headphones positioned

1

at in headphones diagram on page 2.
Connect the USB plug to a USB port on
a computer or wall adapter to activate
charging.

**Make sure to keep the headphones charging
for a minimum of 2 hours before initial use.

USB Plug Micro USB Plug

headphone

6

Product Specification

Driver Diameter: 40 mm

Impedance: 32 Ohms

Frequency Response: 20 Hz - 20 KHz

Sensitivity: 108 dB +/- 3 dB

Power Supply: Li-ion Battery 3.7V 200 mAh

Playing Time: 2 - 3 Hours

Charging Time: 2 Hours

Bluetooth Range: 32.8 Feet

Micro USB Cable Included

headphones is

Check the connection between
headphones with phone or computer,
if the connection is not established,
please connect again. Make sure
the headphone is paired and connected
with your target phone or other master
device.

turned

initial use.

has been charged

6

Safety instructions for the lithium battery and charging the product

-The input voltage to the product is 5V 1A.

-In order to charge the product in safe manner and reliable

conditions, please only adopt certified appropriate charger/ adapter

for charging the product.

-Only charge the product at ambient temperatures between 10 deg

°C/ 50 deg °F and 40 deg °C/104 deg °F.

- Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to

sunlight or throw into fire.

-Switch off the product after use.

-Please note that we won’t take any responsibility for any wrong

operation (eg. Voltage higher than 5V) as this may result in severe

injury or loss of property, and we cannot control the operating

process during the time the user using this product.

-In extreme cases, abuse or misuse of Lithium battery pack can

lead to explosion, heat generation, fire development or smoke

development.

Approval: Date:

7. FCC Statement

This device complies with the part 15 of the FCC rules. Operation is subject

to the following two conditions:(1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution: changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with instructions may cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on. The user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or experienced radio/ TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction.

FCC ID: 2ADM5-HP0363