Zeeva HP 0194 Users manual

COSMOS WIRELESS HEADPHONES INSTRUCTION MANUAL
1 Introduction································ 2 Packaging Contents····················· 3 Connection Diagram····················· 4 How T
o Use·······························
4.1 General Function···················
4.2 Pairing To Mobile Phone··········
4.3 Charging Your Product············ 5 Product Specification··················· 6 FAQ········································· 7 FCC Statement···························
2. Packaging Contents 4. How to use1. IntroductionTable of contents
1 2 2 3 3 4 5 6 7 8
Congratulations, and thank you for choosing the Cosmos Wireless Headphones. This manual will help you operate the Cosmos Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Cosmos Wireless Headphones.
Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual.
Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage.
Do not modify
, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphone, etc. All are not covered under warranty.
Do not use an diluent or volatile liquid to clean the Bluetooth headphones.
Do not use the Bluetooth headphones in a hazardous location.
1X Cosmos Wireless Headphones
On / O Button
DC5V OFF/ON
LED indicator
Micro USB Charging port
1X Micro USB Cable
1X Instruction Manual
1
Turn on & Enter the pairing mode
Pairing
Turn of
Charging
Answering a Call
Play / Pause Music
Micr
ophone
Press and hold the On / Off Button for 3 seconds. LED indicator flashes red/blue.
Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action. After pairing, the LED indicator blin blue.
Press and hold the On / Off Button
f
for 3 seconds.
Plug the Micro USB to the Micro USB port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off.
Press On / Off button to answer phone call, press On / Of again to end call.
Press On / Off button to play music and press it again to pause music.
After turning on, the
f button
ks
4.2. Pairing to Mobile phone or other device 4.3. Charging your headphones
To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range.
Turn on your phone and ensure the Bluetooth function is activated.
T
urn on the headphones, enter the pairing mode.
Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
After a few seconds the phone will list the “Cosmos BT HP” as a discover device. Select it and follow your phone’s instructions to select this pairing.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with Cosmos Wireless Headphones from your phone.
Use the Micro USB cable accessory provided with this headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned
1
at in headphones diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.
**Make sure to keep the headphones charging for a minimum of 6 hours before initial use.
USB Plug Micro USB Plug
headphone
Product Specification
er Diameter
Driv
Fr
equency Range
Sensitivity
Impedance
Bluetooth Version
Power Supply
Battery Capacity
Receiver Distance
Charging Time
Playing Time
Voltage
40mm
2 - 2.Hz
110dB
32ohm +/-10%
4.1
Lithium Batt
3.7V
250 mAh
≤32.8 Feet
2 Hours
1-2 Hours
ery
headphones is
2
Check the connection between headphones with phone or computer if the connection is not established, please connect again. Make sure the headphone is paired and connected with your target phone or other master device.
turned
initial use.
has been charged
,
7. FCC Statement
FCC ID: 2ADM5-HP-0194
Loading...