Zeeva HP 0063 User Manual

BT FROZEN 2

HEADPHONES

WITH VOLUME LIMITING TECHNOLOGY

INSTRUCTION MANUAL

1 Introduction································
2 Packaging Contents·····················
3 Connection Diagram·····················
4 How To Use·······························

4.1 General Function···················

4.2 Pairing To Mobile Phone··········

4.3 Charging Your Product············
5 Product Specification···················
6 FAQ·········································
Statement··································
7 FCC Statement···························

2. Packaging Contents 4. How to use1. IntroductionTable of contents

1
2
2
3
3
4
5
6
6
7
8

Congratulations, and thank you for choosing
the Kid Safe Wireless Headphones.
This manual will help you operate the
Kid Safe Wireless Headphones, but firstly
you should familiarize yourself with the
Bluetooth functionality of your mobile
phone or other devices before using
the Kid Safe Wireless Headphones.

Please follow the rules depicted in this
manual closely to ensure your safety.
Before using this Bluetooth headphones,
we would strongly encourage you to read
through this user manual.

Be more wary of any edges, uneven
surfaces, metal parts, accessories and
its packaging so as to prevent any
possible injury or damage.

Do not modify, repair or dismantle this
Bluetooth headphones. Doing so may
result in fires, electric shocks, complete
breakdown of this Bluetooth headphones,
etc. All are not covered under warranty.

Do not use an diluent or volatile liquid to
clean the Bluetooth headphones.

Do not use the Bluetooth headphones in a
hazardous location.

1 X Kid Safe Wireless Headphones

1 X Micro USB Cable

1 X Instruction Manual

LED Indicate

Microphone

Micro USB
Charging port

1

On / O Button

Turn on &
Enter the pairing
mode

Pairing

Turn off

Charging

Answering
a Call

Play / Pause
Music

Press and hold the On / Off Button
for 3 seconds. After turning on, the
LED indicator flashes red/blue.

Use a mobile phone with Bluetooth
function or other Bluetooth devices
to perform necessary pairing action.
After pairing, the LED indicator slowly
blinks with blue.

Press and hold the On / Off Button
for 3 seconds.

Plug the Micro USB to the Micro
USB port. When charging, the LED
indicator turns red. After full charging,
the LED indicator turns off.

Press On / Off button to answer phone
call, press On / Off button again to end call.
Press and hold 2 seconds to reject call.
Double click to redial last call.

Press On / Off button to play music
and press it again to pause music.

4.2. Pairing to Mobile phone or other device 4.3. Charging your headphones

To use your Bluetooth headphones, you must
first pair your headphones with a mobile phone
or other Bluetooth device. Once your Bluetooth
headphones is paired to a specific mobile
phone, they will remain paired and
automatically recognize each other whenever
they are within range.

Turn on your phone and ensure the Bluetooth
function is activated.

Turn on the headphones, enter the pairing mode.

Search your Bluetooth devices on your phone
by following the phone’s instructions. Refer
to your phone’s user manual for more
information.

After a few seconds the phone will list the
“BT FROZEN 2 HP” as a discover device.
Select it and follow your phone’s instructions
to select this pairing.

Your phone will confirm the pairing, and then
press Yes/OK.

Finally, select to connect with Kid Safe Wireless
Headphones from your phone.

Use the Micro USB cable accessory
provided with this headphones. Connect the
Micro USB plug to the Micro USB
charging port on the headphones positioned

1

at in headphones diagram on page 2.
Connect the USB plug to a USB port on
a computer or wall adapter to activate
charging.

**Make sure to keep the headphones charging
for a minimum of 2 hours before initial use.

USB Plug Micro USB Plug

Warning:

• You must select a qualified charger from
a regular manufacturer.

• You must charge the Bluetooth headphones
if it has not been used for more than 6 months.

Product Specification

Driver Diameter 40 mm

Voltage

20 Hz - 20 KHz

85 dB

32 Ohms

Li-ion Battery

3.7V

180 mAh

≤32.8 Feet

2 Hours

2 - 3 Hours

Frequency Range

Sensitivity

Impedance

Power Supply

Battery Capacity

Receiver Distance

Charging Time

Playing Time

1. Why is there no power even when the headphones
is turned on ?
Ans: Ensure the battery has been charged up to
1 hour for initial use.

2. There is no sound when playback.
Ans: Check the connection between headphones with

phone or computer, if the connection is not established,
please connect again. Make sure the headphones is
paired and connected with your target phone or other
master device.

Safety instructions for the lithium battery and charging the product

-The input voltage to the product is 5V 1A.

-In order to charge the product in safe manner and reliable
conditions, please only adopt certified appropriate charger/
adapter for charging the product.

-Only charge the product at ambient temperatures between
10 deg °C/ 50 deg °F
and 40 deg °C/104 deg °F.

- Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose
to sunlight or throw into fire.

-Switch off the product after use.

-Please note that we won’t take any responsibility for any
wrong operation (e.g. Voltage higher than 5V) as this may
result in severe injury or loss of property, and we cannot
control the operating process during the time the user using
this product.

-In extreme cases, abuse or misuse of Lithium battery pack
can lead to explosion, heat generation, fire development or
smoke development.

Made in China

Keep All Relevant Information for Future Reference

7. FCC Statement

FCC ID: 2ADM5-HP-0063