Zeeva EP 0603 User Manual
Headset Overview
Package Contents
Infinity Wireless Headset x 1 pc
Micro USB Charging Cable x 1 pc
Instruction Manual x 1
INFINITY
W i r ele s s H e ads e t
INSTRUCTION MANUAL
Thank you for purchasing the Infinity Wireless Headset.
This manual provides more information about the wireless headset,
Headset Overview
Answer/Reject a call
When you receive a call, press the On/Off Button once to accept the call,
or answer the call normally via your mobile phone.
Long press On/Off Button to reject a call
End a call
Press the On/Off Button once to end the call or hang up your mobile phone.
Functions
Short press + Button to advance to next song
Short press - Button to go back to previous song
Long press + Button to turn up volume
Long press - Button to turn down volume
Charging your headset
LED indicator light turns red when charging your headset
LED indicator light turns off when your headset are fully charged
Technical specification
Drive r Diameter : 10 mm
Impedanc e: 32 Ohms
Sen sitivi ty: 96 d B +/- 3 dB
Frequency Response : 20 Hz - 2 0 KHz
Power Supply: Li-ion B atter y 3.7V 55 m Ah
Pla ying Time: 1.5 - 2 Hours
Charging T ime: 2 Hour s
Bluet ooth Range : 32. 8 Feet
Mic ro USB c able included .
please read the instructions before using.
Micro USB Charging Cable:
USB Plug
Micro USB Plug
Side:
Top:
Vol+/
Next Song
Vol-/
Previous Song
On/Off Button
Play/Pause Music
Answer/End Call
Micro USB
Charging Port
Microphone
FAQ
If the Infinity Wireless Headset cannot be paired with your device,
please try the following:
Ensure that your headset are in pairing mode or reconnection mode.
Ensure that Bluetooth search function of your mobile device is activated.
If the Infinity Wireless Headset will not turn on:
Make sure the headset are fully charged.
Can I change the battery for the headset?
Infinity Wireless Headset use a built-in non-detachable battery which
cannot be removed.
If the Infinity Wireless Headset cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely
and the outlet works. If you use a computer, ensure that it is connected and
the USB port is powered.
Safety instructions for the lithium battery and charging the product
-The input voltage to the product is 5V 1A.
-In order to charge the product in safe manner and reliable conditions, please
only adopt certified appropriate charger/ adapter for charging the product.
-Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F
and 40 deg °C/104 deg °F.
-Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw
into fire.
-Switch off the product after use.
-Please note that we won’t take any responsibility for any wrong operation
(e.g. Voltage higher tha
property, and we cannot control the operating process during the time the user
using this product.
-In extreme cases, abuse or misuse of Lithium battery pack can lead to
explosion, heat generation, fire development or smoke development.
n 5V) as this may result in severe injury or loss of
Power On/Off
Power on
Press and hold down the On/Off Button for 3 seconds
and the LED will flash in red and blue alternately.
Power off
Press and hold down the On/Off Button for 4 seconds
and the LED will turn off.
Pair Infinity Wireless Headset with your mobile device
1. Keep the distance between your wireless headset and mobile phone
(or other devices) within 32.8 Feet.
2. Power on the Infinity Wireless Headset
3. Activate the Bluetooth function on your phone within range and select
Infinity Headset” from the list shown.
“BT
4. The LED lights in blue when paired successfully.
Attention: If the pairing is not successful within 5 minutes, the headset will
power off, please repeat the pairing procedures to try again.
Reconnect Infinity Wireless Headset to your mobile device
When powered on, the headset will automatically connect with the last
successfully paired device.
Disconnect the headset from your mobile device
Power off the headset; or
Switch off the Bluetooth on your mobile phone; or
Leave the headset 60ft away from your mobile phone or further.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and f
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harm
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
ful interference to radio or television reception, which
ound to comply with the limits for a
FCC ID: 2ADM5-EP-0603
Item# EP-0603
Made Exclusively for Five Below
Distributed by Zeeva International Limited
Suite 1006C-8, 10th Floor, Exchange Tower,
33 Wang Chiu Road, Kowloon Bay,
Hong Kong, China
Made in China
Keep all relevant information for future reference
Loading...