Zebra Technologies PS20J User Manual

PS20

Regulatory Guide

合 格 证

MN-003276-02a_ps20-rg-en.fm Page 1 Wednesday, September 5, 2018 8:47 AM

MN-003276-02 Rev.A 09/18

Zebra Technologies | 3 Overlook Point | Lincolnshir e, IL 60069 USA

www.zebra.com

©2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the
stylized Zebra head are trademarks of ZIH Corp, registered i n many
jurisdictions worldwide. All other trademarks are th e property of their
respective owners.

Warranty

For the complete Zebra hardware product
warranty statement, go to: zebra.com/warranty.

Service Information

Before you use the unit, it must be configured to
operate in your facility’s network and run your
applications.

If you have a problem running your unit or using
your equipment, contact your facility’s Technical
or Systems Support. If there is a problem with
the equipment, they will contact the Zebra Global
Customer Support at zebra.com/support.

For the latest version of this guide go to:
zebra.com/support.

Software Support

Zebra wants to ensure that customers have the
latest entitled software at the time of device
purchase in order to keep the device operating at
peak performance levels. To confirm that your
Zebra device has the latest entitled software
available at the time of purchase, visit

zebra.com/support.

Check for the latest software from Support >
Products, or search for the device and select
Support > Software Downloads.

If your device does not have the latest entitled
software as of your device purchase date, e-mail
Zebra at [e-mail] and
ensure you include the following essential device
information:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are
requesting.

If it is determined by Zebra that your device is
entitled to the latest version of software, as of the
date you purchased your device, you will receive
an e-mail containing a link directing you to a
Zebra Web site to download the appropriate
software.

Regulatory Information

This device is approved under Zebra Technologies
Corporation.

This guide applies to model number: PS20J.
All Zebra devices are designed to be compliant with

the rules and regulations in locations they are sold
and will be labeled as required.

Local language translations are available at the
following website: zebra.com/support

Any changes or modifications to Zebra equipment,
not expressly approved by Zebra, could void the
user’s authority to operate the equipment.

Declared maximum operating temperature: 50°C.

CAUTION:

Only use Zebra approved and UL Listed accessories,
battery packs and battery chargers.

Do NOT attempt to charge damp/wet mobile comput
ers or batteries. All components must be dry before
connecting to an external power source.

.

Bluetooth® Wireless
Technology

This is an approved Bluetooth® product. For more
information or to view the End Product Listing,
please visit bluetooth.org/tpg/listings.cfm

.

Wireless Device Country
Approvals

Regulatory markings subject to certification are
applied to the device signifying the radio(s) is/are
approved for use in the following countries and
continents: United States, Canada, Japan, China,
South Korea, Australia, and Europe.

Please refer to the Declaration of Conformity (DoC)
for details of other country markings. This is
available at: zebra.com/doc

Note: Europe includes Austria, Belgium, Bulgaria,
Croatia, Czech Republic, Cyprus, Denmark,
Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania,
Slovak Republic, Slovenia, Spain, Sweden,
Switzerland, and the United Kingdom.

CAUTION: Operation of the device without regulatory

approval is illegal.

.

Country Roaming

This device incorporates the International Roaming
feature (IEEE802.11d), which will ensure the
product operates on the correct channels for the
particular country of use.

Wi-Fi Direct

Operation is limited to the following channels/bands
as supported in the country of use:

• Channels 1 - 11 (2412 - 2462 MHz)

• Channels 36 - 48 (5150 - 5250 MHz)

• Channels 149 - 165 (5745 - 5825 MHz)

Frequency of Operation – FCC
and IC

5 GHz Only

Industry Canada Statement

CAUTION: The device for the band 5,150 - 5,250 MHz

is only for indoor usage to reduce potential for harmful
interference to co-Channel mobile satellite systems.
High power radars are allocated as primary users
(meaning they have priority) of 5,250 - 5,350 MHz and
5,650 - 5,850 MHz and these radars could cause in
terference and/or damage to LE-LAN devices.

AVERTISSEMENT: Le dispositive fonctionnant dans la

bande 5,150 - 5,250 MHz est réservé uniquement
pour une utilisation à l'intérieur afin de réduire les
risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux. Les
utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu'ils ont la
priorité) pour les bands 5,250 - 5,350 MHz et 5,650 ­5,850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN­EL.

2.4 GHz Only

The available channels for 802.11 operation in the
US are Channels 1 to 11. The range of channels is
limited by firmware.

Health and Safety
Recommendations

Ergonomic Recommendations

CAUTION: In order to avoid or minimize the potential

risk of ergonomic injury follow the recommendations
below. Consult with your local Health & Safety Man
ager to ensure that you are adhering to your compa
ny's safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within
easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

-

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Warnings for Use of Wireless
Devices

CAUTION: Please observe all warning notices with re

gard to the usage of wireless devices.

Wireless devices transmit radio frequency energy and
may affect medical electrical equipment.
Wireless devices should be switched off wherever you
are requested to do so in hospitals, clinics, or
healthcare facilities. These requests are designed to
prevent possible interference with sensitive medical
equipment.

Pacemakers

Pacemaker manufacturers recommended that a
minimum of 15 cm (6 inches) be maintained
between a handheld wireless device and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are
consistent with independent research and
recommendations by Wireless Technology
Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15
cm (6 inches) from their pacemaker when
turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the
pacemaker to minimize the potential for
interference.

• If you have any reason to suspect that
interference is taking place, turn OFF your
device.

Other Medical Devices

Please consult your physician or the manufacturer
of the medical device, to determine if the operation
of your wireless product may interfere with the
medical device.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the
instructions supplied.

International

The device complies with internationally recognized

-

standards covering human exposure to
electromagnetic fields from radio devices. For
information on “International” human exposure to
electromagnetic fields refer to the Zebra
Declaration of Conformity (DoC) at: zebra.com/doc

For further information on the safety of RF energy
from wireless devices - see zebra.com/

responsibility located under Corporate

Responsibility.

Europe

Handheld Devices

This device was tested for typical handheld and
body worn operations. Use only Zebra tested and
approved belt-clips, holsters, and similar
accessories to ensure EU RF Exposure

Compliance. Always follow the instructions for use
as detailed in the accessory guide. Use of third­party belt clips, holsters, and similar accessories
may not comply with RF exposure compliance
requirements, and should be avoided.

US and Canada

-

-

Co-located Statement

To comply with FCC RF exposure compliance
requirement, the antenna used for this transmitter
must not be co-located or operating in conjunction
with any other transmitter/antenna except those
already approved in this filling.

Handheld Devices

This device was tested for typical handheld and
body worn operations. Use only Zebra tested and
approved belt clips, holsters, and similar
accessories to ensure RF Exposure Compliance.
Always follow the instructions for use as detailed in
the accessory guide. Use of third-party belt clips,
holsters, and similar accessories may not comply
with RF exposure compliance requirements, and
should be avoided.

LED Devices

Classified as ‘EXEMPT RISK GROUP’ according to

-

IEC 62471:2006 and EN 62471:2008.
Pulse duration: CW

Battery Information

CAUTION: Risk of explosion if battery is replaced by

an incorrect type. Dispose of batteries according to
instructions.

Use only Zebra approved batteries. Accessories
which have battery charging capability are approved
for use with the following battery models:

• Model Number BT-000351 (3.635 VDC, 3,500
mAh).

Zebra approved rechargeable battery packs are
designed and constructed to the highest standards
within the industry.

However, there are limitations to how long a battery
can operate or be stored before needing
replacement. Many factors affect the actual life
cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.

When batteries are stored over six (6) months,
some irreversible deterioration in overall battery
quality may occur. Store batteries at half of full
charge in a dry, cool place, removed from the
equipment to prevent loss of capacity, rusting of
metallic parts and electrolyte leakage. When storing
batteries for one year or longer, the charge level
should be verified at least once a year and charged
to half of full charge.

Replace the battery when a significant loss of run
time is detected.

Standard warranty period for all Zebra batteries is
one year, regardless if the battery was purchased
separately or included as part of the mobile
computer or bar code scanner. For more information
on Zebra batteries, please visit: zebra.com/

batterybasics.

Battery Safety Guidelines

The area in which the units are charged should be
clear of debris and combustible materials or
chemicals. Particular care should be taken where
the device is charged in a non-commercial
environment.

• Follow battery usage, storage, and charging

guidelines found in the user's guide.

• Improper battery use may result in a fire,

explosion, or other hazard.

• To charge the mobile device battery, the battery

and charger temperatures must be between
+32°F and +104°F (0°C and +40°C).

• Do not use incompatible batteries and chargers.

.

Use of an incompatible battery or charger may
present a risk of fire, explosion, leakage, or
other hazard. If you have any questions about
the compatibility of a battery or a charger,
contact Zebra support.

• Do not disassemble or open, crush, bend or

deform, puncture, or shred.

• Severe impact from dropping any battery-

operated device on a hard surface could cause
the battery to overheat.

• Do not short circuit a battery or allow metallic or

conductive objects to contact the battery
terminals.

• Do not modify or remanufacture, attempt to
insert foreign objects into the battery, immerse
or expose to water or other liquids, or expose to
fire, explosion, or other hazard.

• Do not leave or store the equipment in or near
areas that might get very hot, such as in a
parked vehicle or near a radiator or other heat
source. Do not place battery into a microwave
oven or dryer.

• Battery usage by children should be
supervised.

• Please follow local regulations to promptly
dispose of used re-chargeable batteries.

• Do not dispose of batteries in fire.

• Seek medical advice immediately if a battery
has been swallowed.

• In the event of a battery leak, do not allow the
liquid to come in contact with the skin or eyes.
If contact has been made, wash the affected
area with large amounts of water and seek
medical advice.

• If you suspect damage to your equipment or
battery, contact Zebra support to arrange for
inspection.

Radio Frequency Interference
Requirements-FCC

Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the
equipment and receiver

• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected

• Consult the dealer or an experienced radio/TV
technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

Radio Frequency Interference
Requirements - Canada

CAN ICES-3 (B)/NMB-3(B)

Radio Transmitters

This device complies with Industry Canada's
licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not
cause interference; and (2) This device must
accept any interference, including interference that
may cause undesired operation of the device.

Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radio
électrique subi même si le brouillage est
susceptible d'en compromettre le fonctionnement.

Marking and
European Economic

Area (EEA)

The use of 5 GHz RLAN throughout the EEA has
the following restrictions:

• 5.15 - 5.35 GHz is restricted to indoor use only.

Statement of Compliance

Zebra hereby declares that this radio equipment is
in compliance with Directives 2014/53/EU and
2011/65/EU.

The full text of the EU Declaration of Conformity is
available at the following internet address:
zebra.com/doc.

Korea Warning Statement for

Class B ITE

기 종 별 사 용 자 안 내 문
B급 기기

( 가정용
방송통신기자
재)

이 기기는 가정용 (B 급 )
전자파적합기기로서 주로
가정에서 사용하는 것을
목적으로 하며 , 모든
지역에서 사용할 수
있습니다 .

Other Countries

Australia

The use of 5 GHz RLAN in Australia is restricted in
the following band 5.60 – 5.65GHz.

China

通过访问以下网址可下载当地语言支持的产品说明
书

zebra.com/support

锂电池安全警示语 :
警告： 请勿拆装，短路，撞击，挤压或者投入火中
注意： 如果电池被不正确型号替换，或出现鼓胀，

会存在爆炸及其他危险
请按说明处置使用过的电池
电池浸水后严禁使用
合格证：

Eurasian Customs Union

Данный продукт соответствует требованиям
знака EAC.

Hong Kong

In accordance with HKTA1039, the band 5.15GHz -

5.35GHz is for indoor operation only.

Mexico

La operación de este equipo está sujeta a las
siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.

South Korea

해당 무선설비는 운용 중 전파혼신 가능성이 있음
해당 무선설비는 전파혼신 가능성이 있으므로

인명안전과 관련된 서비스는 할 수 없습니다

Ukraine

Дане обладнання відповідає вимогам технічного
регламенту № 1057, 2008 на обмеження щодо
використання деяких небезпечних речовин в
електричних та електронних пристроях.

Waste Electrical and
Electronic Equipment
(WEEE)

English: For EU Customers: All products at the

end of their life must be returned to Zebra for
recycling. For information on how to return product,
please go to: zebra.com/weee

Français: Clients de l'Union Européenne: Tous les
produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus
amples informations sur le retour de produits,
consultez : zebra.com/weee

Español: Para clientes en la Unión Europea: todos
los productos deberán entregarse a Zebra al final
de su ciclo de vida para que sean reciclados. Si

.

.

MN-003276-02a_ps20-rg-en.fm Page 2 Wednesday, September 5, 2018 8:47 AM

desea más información sobre cómo devolver un
producto, visite: zebra.com/weee

.

Bulgarish: За клиенти от ЕС: След края на
полезния им живот всички продукти трябва да
се връщат на Zebra за рециклиране. За
информация относно връщането на продукти,
моля отидете на адрес: zebra.com/weee

.

Deutsch: Für Kunden innerhalb der EU: Alle
Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden.
Informationen zur Rücksendung von Produkten
finden Sie unter zebra.com/weee

.

Italiano: per i clienti dell'UE: tutti i prodotti che sono
giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il
riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web:

zebra.com/weee

.

Português: Para clientes da UE: todos os
produtos no fim de vida devem ser devolvidos à
Zebra para reciclagem. Para obter informações
sobre como devolver o produto, visite: zebra.com/

weee.

Nederlands: Voor klanten in de EU: alle producten
dienen aan het einde van hun levensduur naar
Zebra te worden teruggezonden voor recycling.
Raadpleeg zebra.com/weee

voor meer informatie

over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej:

Produkty wycofane z eksploatacji należy zwrócić
do firmy Zebra w celu ich utylizacji. Informacje na
temat zwrotu produktów znajdują się na stronie
internetowej zebra.com/weee

.

Čeština: Pro zákazníky z EU: Všechny produkty je
nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o zpùsobu
vrácení produktu najdete na webové stránce:

zebra.com/weee

.

Eesti: EL klientidele: kõik tooted tuleb nende eluea
lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi:

zebra.com/weee

.

Magyar: Az EU-ban vásárlóknak: Minden
tönkrement terméket a Zebra vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a zebra.com/weee
weboldalra.

Svenska: För kunder inom EU: Alla produkter som
uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar
produkten finns på zebra.com/weee

.

Suomi: Asiakkaat Euroopan unionin alueella:
Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä.
Lisätietoja tuotteen palauttamisesta on osoitteessa

zebra.com/weee

.

Dansk: Til kunder i EU: Alle produkter skal
returneres til Zebra til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af
produkter på: zebra.com/weee

.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα,
στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Zebra για ανακύκλωση. Για
περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη
διεύθυνση zebra.com/weee

στο Διαδίκτυο.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu
waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar
tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: zebra.com/weee

.

Românesc: Pentru clienţii din UE: Toate
produsele, la sfârşitul duratei lor de funcţionare,
trebuie returnate la Zebra pentru reciclare. Pentru
informaţii despre returnarea produsului, accesaţi:

zebra.com/weee

.

Slovenski: Za kupce v EU: vsi izdelki se morajo po
poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vračilu izdelka obiščite:

zebra.com/weee

.

Slovenčina: Pre zákazníkov z krajín EU: Všetky
výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie
informácie o vrátení výrobkov nájdete na:

zebra.com/weee

.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus
jų eksploatacijos laikui, turi būti grąžinti utilizuoti į

kompaniją „Zebra“. Daugiau informacijos, kaip
grąžinti gaminį, rasite: zebra.com/weee

.

Latviešu: ES klientiem: visi produkti pēc to
kalpošanas mūža beigām ir jānogādā atpakaļ
Zebra otrreizējai pārstrādei. Lai iegūtu informāciju
par produktu nogādāšanu Zebra, lūdzu, skatiet:

zebra.com/weee

.

Türkçe: AB Müşterileri için: Kullanım süresi dolan
tüm ürünler geri dönüştürme için Zebra'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında
bilgi için lütfen şu adresi ziyaret edin: zebra.com/

weee.

Turkish WEEE Statement
of Compliance

EEE Yönetmeliğine Uygundur.

End User License
Agreement

IMPORTANT PLEASE READ CAREFULLY: This
End User License Agreement (“EULA”) is a legal
agreement between you (either an individual or a
single entity) (“Licensee”) and Zebra International
Holdings Corporation (“Zebra”) for software, owned
by Zebra and its affiliated companies and its third
party suppliers and licensors, that accompanies
this EULA, which includes machine-readable
instructions used by a processor to perform specific
operations other than machine-readable
instructions used for the sole purpose of booting
hardware during a startup sequence (“Software”).
BY USING THE SOFTWARE, YOU
ACKNOWLEDGE ACCEPTANCE OF THE TERMS
OF THIS EULA. IF YOU DO NOT ACCEPT THESE
TERMS, DO NOT USE THE SOFTWARE.

1. GRANT OF LICENSE. Zebra grants you, End­User Customer, the following rights provided that
you comply with all terms and conditions of this
EULA: For Software associated with Zebra
hardware, Zebra hereby grants you a limited,
personal, non-exclusive license during the term of
this Agreement to use the Software solely and
exclusively for your internal use in support of the
operation of your associated Zebra hardware and
for no other purpose. To the extent that any portion
of the Software is provided to you in a manner that
is designed to be installed by you, you may install
one copy of the installable Software on one hard
disk or other device storage for one printer,
computer, workstation, terminal, controller, access
point or other digital electronic device, as
applicable (an “Electronic Device”), and you may
access and use that Software as installed on that
Electronic Device so long as only one copy of such
Software is in operation. For a standalone
Software application, you may install, use, access,
display and run only the number of copies of the
Software to which you are entitled. You may make
one copy of the Software in machine readable form
for backup purposes only, provided that the backup
copy must include all copyright or other proprietary
notices contained on the original. In the absence of
a support contract, you are entitled, for a period of
ninety (90) days from when the instance of
Software (or hardware including the Software) are
first shipped by Zebra or downloaded by End-User
Customer, to obtain, if available, updates, from
Zebra and operational technical support, not
including implementation, integration or
deployment support (“Entitlement Period”). You
may not obtain updates from Zebra after the
Entitlement Period, unless covered by a Zebra
support contract or other written agreement with
Zebra.

Certain items of the Software may be subject to
open source licenses. The open source license
provisions may override some of the terms of this
EULA. Zebra makes the applicable open source
licenses available to you on a Legal Notices
readme file available on your device and/or in
System Reference guides or in Command Line
Interface (CLI) Reference guides associated with
certain Zebra products.

1.1 Authorized Users. For a standalone Software
application, the licenses granted are subject to the
condition that you ensure the maximum number of
authorized users accessing and using the Software
either alone or concurrently is equal to the number
of user licenses for which you are entitled to use
either through a Zebra channel partner member or
Zebra. You may purchase additional user licenses

at any time upon payment of the appropriate fees to
the Zebra channel partner member or Zebra.

1.2 Software Transfer. You may only transfer this
EULA and the rights to the Software or updates
granted herein to a third party in connection with
the support or sale of a device which the Software
accompanied or in connection with a standalone
Software application during the Entitlement Period
or as covered by a Zebra support contract. In such
event, the transfer must include all of the Software
(including all component parts, the media and
printed materials, any upgrades, and this EULA)
and you may not retain any copies of the Software.
The transfer may not be an indirect transfer, such
as a consignment. Prior to the transfer, the end
user receiving the Software must agree to all the
EULA terms. If Licensee is purchasing Zebra
Products and licensing Software for end use by a
U.S. Government end user, Licensee may transfer
such Software license, but only if: (i) Licensee
transfers all copies of such Software to the U.S.
Government end user or to an interim transferee,
and (ii) Licensee has first obtained from the
transferee (if applicable) and ultimate end user an
enforceable end user license agreement containing
restrictions substantially identical to the ones
contained in this Agreement. Except as stated in
the foregoing, Licensee and any transferee(s)
authorized by this provision may not otherwise use
or transfer or make available any Zebra software to
any third party nor permit any party to do so.

2. RESERVATION OF RIGHTS AND
OWNERSHIP. Zebra reserves all rights not
expressly granted to you in this EULA. The
Software is protected by copyright and other
intellectual property laws and treaties. Zebra or its
suppliers own the title, copyright and other
intellectual property rights in the Software. The
Software is licensed, not sold.

3. LIMITATIONS ON END USER RIGHTS. You
may not reverse engineer, decompile,
disassemble, or otherwise attempt to discover the
source code or algorithms of, the Software (except
and only to the extent that such activity is expressly
permitted by applicable law not withstanding this
limitation), or modify, or disable any features of, the
Software, or create derivative works based on the
Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the
Software.

4. CONSENT TO USE OF DATA. You agree that
Zebra and its affiliates may collect and use
technical information gathered as part of the
product support services related to the Software
provided to you that does not personally identify
you. Zebra and its affiliates may use this
information solely to improve their products or to
provide customized services or technologies to
you. At all times your information will be treated in
accordance with Zebra's Privacy Policy, which can
be viewed at: zebra.com

.

5. LOCATION INFORMATION. The Software may
enable you to collect location-based data from one
or more client devices which may allow you to track
the actual location of those client devices. Zebra
specifically disclaims any liability for your use or
misuse of the location-based data. You agree to
pay all reasonable costs and expenses of Zebra
arising from or related to third party claims resulting
from your use of the location-based data.

6. SOFTWARE RELEASES. During the
Entitlement Period, Zebra or Zebra's channel
partner members may make available to you
software releases as they become available after
the date you obtain your initial copy of the
Software. This EULA applies to all and any
component of the release that Zebra may make
available to you after the date you obtain your initial
copy of the Software, unless Zebra provides other
license terms along with such release. To receive
Software provided through the release, you must
first be licensed for the Software identified by Zebra
as entitled to the release. We recommend that you
periodically check availability of a Zebra support
contract to ensure that you are entitled to receive
any available Software releases. Some features of
the Software may require you to have access to the
internet and may be subject to restrictions imposed
by your network or internet provider.

7. EXPORT RESTRICTIONS. You acknowledge
that the Software is subject to export restrictions of
various countries. You agree to comply with all
applicable international and national laws that apply

to the Software, including all the applicable export
restriction laws and regulations.

8. ASSIGNMENT. You may not assign this
Agreement or any of your rights or obligations
hereunder (by operation of law or otherwise)
without the prior written consent of Zebra. Zebra
may assign this Agreement and its rights and
obligations without your consent. Subject to the
foregoing, this Agreement shall be binding upon
and inure to the benefit of the parties to it and their
respective legal representatives, successors and
permitted assigns.

9. TERMINATION. This EULA is effective until
terminated. Your rights under this License will
terminate automatically without notice from Zebra if
you fail to comply with any of the terms and
conditions of this EULA. Zebra may terminate this
Agreement by offering you a superseding
Agreement for the Software or for any new release
of the Software and conditioning your continued
use of the Software or such new release on your
acceptance of such superseding Agreement. Upon
termination of this EULA, you must cease all use of
the Software and destroy all copies, full or partial,
of the Software.

10. DISCLAIMER OF WARRANTY. UNLESS
SEPARATELY STATED IN A WRITTEN EXPRESS
LIMITED WARRANTY, ALL SOFTWARE
PROVIDED BY ZEBRA IS PROVIDED “AS IS”
AND ON AN “AS AVAILABLE” BASIS, WITHOUT
WARRANTIES OF ANY KIND FROM ZEBRA,
EITHER EXPRESS OR IMPLIED. TO THE
FULLEST EXTENT POSSIBLE PURSUANT TO
APPLICABLE LAW, ZEBRA DISCLAIMS ALL
WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING, BUT NOT LIMITED
TO, IMPLIED WARRANTIES OF
MERCHANTABILITY, SATISFACTORY QUALITY
OR WORKMANLIKE EFFORT, FITNESS FOR A
PARTICULAR PURPOSE, RELIABILITY OR
AVAILABILITY, ACCURACY, LACK OF VIRUSES,
NON INFRINGEMENT OF THIRD PARTY RIGHTS
OR OTHER VIOLATION OF RIGHTS. ZEBRA
DOES NOT WARRANT THAT THE OPERATION
OF THE SOFTWARE WILL BE UNINTERRUPTED
OR ERROR FREE. TO THE EXTENT THAT THE
SOFTWARE COVERED BY THIS EULA
INCLUDES EMULATION LIBRARIES, SUCH
EMULATION LIBRARIES DO NOT WORK 100%
CORRECTLY OR COVER 100% OF THE
FUNCTIONALITY BEING EMULATED, ARE
OFFERED “AS IS” AND WITH ALL FAULTS, AND
ALL THE DISCLAIMERS AND LIMITATIONS
CONTAINED IN THIS PARAGRAPH AND THIS
AGREEMENT APPLY TO SUCH EMULATION
LIBRARIES. SOME JURISDICTIONS DO NOT
ALLOW EXCLUSIONS OR LIMITATIONS OF
IMPLIED WARRANTIES, SO THE ABOVE
EXCLUSIONS OR LIMITATIONS MAY NOT
APPLY TO YOU. NO ADVICE OR INFORMATION,
WHETHER ORAL OR WRITTEN, OBTAINED BY
YOU FROM ZEBRA OR ITS AFFILIATES SHALL
BE DEEMED TO ALTER THIS DISCLAIMER BY
ZEBRA OF WARRANTY REGARDING THE
SOFTWARE, OR TO CREATE ANY WARRANTY
OF ANY SORT FROM ZEBRA.

11. THIRD-PARTY APPLICATIONS. Certain third
party applications may be included with, or
downloaded with this Software. Zebra makes no
representations whatsoever about any of these
applications. Since Zebra has no control over such
applications, you acknowledge and agree that
Zebra is not responsible for such applications. You
expressly acknowledge and agree that use of third
party applications is at your sole risk and that the
entire risk of unsatisfactory quality, performance,
accuracy and effort is with you. You agree that
Zebra shall not be responsible or liable, directly or
indirectly, for any damage or loss, including but not
limited to any damage to or loss of data, caused or
alleged to be caused by, or in connection with, use
of or reliance on any such third party content,
products, or services available on or through any
such application. You acknowledge and agree that
the use of any third-party application is governed by
such third party application provider's Terms of
Use, License Agreement, Privacy Policy, or other
such agreement and that any information or
personal data you provide, whether knowingly or
unknowingly, to such third-party application
provider, will be subject to such third party
application provider's privacy policy, if such a policy
exists. ZEBRA DISCLAIMS ANY
RESPONSIBILITY FOR ANY DISCLOSURE OF
INFORMATION OR ANY OTHER PRACTICES OF

ANY THIRD PARTY APPLICATION PROVIDER.
ZEBRA EXPRESSLY DISCLAIMS ANY
WARRANTY REGARDING WHETHER YOUR
PERSONAL INFORMATION IS CAPTURED BY
ANY THIRD PARTY APPLICATION PROVIDER
OR THE USE TO WHICH SUCH PERSONAL
INFORMATION MAY BE PUT BY SUCH THIRD
PARTY APPLICATION PROVIDER.

12. LIMITATION OF LIABILITY. ZEBRA WILL NOT

BE LIABLE FOR ANY DAMAGES OF ANY KIND
ARISING OUT OF OR RELATING TO THE USE
OR THE INABILITY TO USE THE SOFTWARE OR
ANY THIRD PARTY APPLICATION, ITS
CONTENT OR FUNCTIONALITY, INCLUDING
BUT NOT LIMITED TO DAMAGES CAUSED BY
OR RELATED TO ERRORS, OMISSIONS,
INTERRUPTIONS, DEFECTS, DELAY IN
OPERATION OR TRANSMISSION, COMPUTER
VIRUS, FAILURE TO CONNECT, NETWORK
CHARGES, IN-APP PURCHASES, AND ALL
OTHER DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES EVEN IF ZEBRA
HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE EXCLUSIONS OR
LIMITATIONS MAY NOT APPLY TO YOU.
NOTWITHSTANDING THE FOREGOING,
ZEBRA'S TOTAL LIABILITY TO YOU FOR ALL
LOSSES, DAMAGES, CAUSES OF ACTION,
INCLUDING BUT NOT LIMITED TO THOSE
BASED ON CONTRACT, TORT, OR
OTHERWISE, ARISING OUT OF YOUR USE OF
THE SOFTWARE OR THIRD PARTY
APPLICATIONS, OR ANY OTHER PROVISION
OF THIS EULA, SHALL NOT EXCEED THE FAIR
MARKET VALUE OF THE SOFTWARE OR
AMOUNT PURCHASER PAID SPECIFICALLY
FOR THE SOFTWARE. THE FOREGOING
LIMITATIONS, EXCLUSIONS, AND
DISCLAIMERS (INCLUDING SECTIONS 10, 11,
12, AND 15) SHALL APPLY TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW,
EVEN IF ANY REMEDY FAILS ITS ESSENTIAL
PURPOSE.

13. INJUNCTIVE RELIEF. You acknowledge that,

in the event you breach any provision of this
Agreement, Zebra will not have an adequate
remedy in money or damages. Zebra shall
therefore be entitled to obtain an injunction against
such breach from any court of competent
jurisdiction immediately upon request without
posting bond. Zebra's right to obtain injunctive relief
shall not limit its right to seek further remedies.

14. MODIFICATION. No modification of this

Agreement shall be binding unless it is in writing
and is signed by an authorized representative of
the party against whom enforcement of the
modification is sought.

15. U.S. GOVERNMENT END USERS

RESTRICTED RIGHTS. This provision only applies
to U.S. Government end users. The Software is a
“commercial item” as that term is defined at 48
C.F.R. Part 2.101, consisting of “commercial
computer software” and “computer software
documentation” as such terms are defined in 48
C.F.R. Part 252.227-7014(a)(1) and 48 C.F.R. Part

252.227-7014(a)(5), and used in 48 C.F.R. Part

12.212 and 48 C.F.R. Part 227.7202, as applicable.

Consistent with 48 C.F.R. Part 12.212, 48 C.F.R.
Part 252.227-7015, 48 C.F.R. Part 227.7202-1
through 227.7202-4, 48 C.F.R. Part 52.227-19, and
other relevant sections of the Code of Federal
Regulations, as applicable, the Software is
distributed and licensed to U.S. Government end
users (a) only as a commercial item, and (b) with
only those rights as are granted to all other end
users pursuant to the terms and conditions
contained herein.

16. APPLICABLE LAW. This EULA is governed by

the laws of the state of Illinois, without regard to its
conflict of law provisions. This EULA shall not be
governed by the UN Convention on Contracts for
the International Sale of Goods, the application of
which is expressly excluded.

CMM Disclosure

部件名称

(Parts)

铅

(Pb)汞(Hg)镉(Cd)

金属部件

(Metal Parts)

电路模块

(Circuit Modules)

电缆及电缆组件

(Cables and Cable
Assemblies)

塑料和聚合物部
件

(Plastic and
Polymeric Parts)

光学和光学组件

(Optics and Optical
Components)

电池

(Batteries)

XOO O O O

XOX O O O

OOO O O O

OOO O O O

OOO O O O

OOO O O O

本表格依据 SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含

量均在 GB/T 26572 规定的限量要求以下。

X: 表示该有害物质至少在该部件的某一均质材料

中的含量超出 GB/T 26572 规定的限量要求。(
企业可在此处，根据实际情况对上表中打 “×”
的技术原因进行进一步说明。）

This table was created to comply with China
RoHS requirements.

限用物質含有情況標示聲明書

設備名稱： 移動式電腦

Equipment name

單元

Unit

印刷電路板及電子組件 _ O O O O O
金屬零件 _ O _ O O O
電纜及電纜組件 O O O O O O
塑料和聚合物零件 O O O O O O
光學與光學元件 O O O O O O

備考 1. 〝超出 0.1 wt % 〞及〝超出 0.01 wt % 〞係指限用
物質之百分比含量超出百分比含量基準值。

Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%”
indicate that the percentage content of the restricted
substance exceeds the reference percentage value of
presence condition.

備考 2. 〝○ 〞係指該項限用物質之百分比含量未超出百分
比含量基準值。

Note 2: “ ○ ” indicates that the percentage content of the
restricted substance does not exceed the percentage of
reference value of presence.

備考 3. 〝−〞係指該項限用物質為排除項目。
Note 3: The “−” indicates that the restricted substance

corresponds to the exemption.

有害物质

六价铬

多溴联苯

(PBB)

)

+6

(Cr

六價鉻

多溴二苯醚

(PBDE)

(PBB)

多溴聯苯

(Cr(VI))

型號 （型式）： PS20J

Type designation (Type)

限用物質及其化學符號

Restricted substances and its

chemical symbols

鉛 (Pb)

汞 (Hg)

鎘 (Cd)

多溴二苯醚

(PBDE)