WA4204-G2/G3 and
WA4304-G2/G3
WORKABOUT PRO
Multi-Dock
User Manual
January, 2017 PN 400092-001
© 2017 Symbol Technologies LLC, a subsidiary of Zebra Technologies
Corporation. All Rights Reserved.
Return-to-Factory Warranty
Zebra provides a return to factory warranty on this product for a period of twelve (12)
months in accordance with the statement of Warranty and Product Support provided
at:
www.zebra.com/warranty.
The warranty on Zebra manufactured equipment does not extend to any product that
has been tampered with, altered, or repaired by any person other than an employee
of an authorized Zebra service organization. See Zebra terms and conditions of sale
for full details.
Important: Zebra warranties take effect on the date of
shipment.
Service
Zebra provides a complete range of product support services to its customers.
For detailed information, please refer to See 6.0: Support Services and Worldwide
Offices. This section also provides information about accessing support services
through the Zebra web site.
Waste Electrical and Electronic
Equipment (WEEE) Directive 2012/19/EU
This Product, and its accessories, comply with the requirements of the Waste
Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU.
If your end-of-life Zebra product or accessory carries a label as shown here, please
contact your local country representative for details on how to arrange recycling. For
a list of international subsidiaries, please go to:
http://www.zebra.com/weee
List of Approvals
North America
EMC: FCC part 15, subpart B; class B
Europe
EMC and Low Voltage Directives
This equipment complies with the essential requirements of EMC Directive
2004/108/EC and Low Voltage Directive 72/23/EEC Declaration of Conformity
available on www.zebra.com/DoC
CE Mark
When used in a residential, commercial or light industrial environment the product
and its approved UK and European peripherals fulfill all requirements for CE marking.
E mark: Vehicle Directive 95/54/EEC
Most of the world countries - safety approvals covered by CB report based on
EN60950-1.
Restriction on Hazardous Substances (RoHS) Directive
2011/65/EU
What is RoHS?
The European Union has mandated that high environmental standards be met in the
design and manufacture of electronic and electrical products sold in Europe, to
reduce hazardous substances from entering the environment.
The “Restriction on Hazardous Substances Directive (RoHS)” prescribes the
maximum trace levels of lead, cadmium, mercury, hexavalent chromium, and flame
retardants PBB and PBDE that may be contained in a product. Only products
meeting these high environmental standards may be “placed on the market” in EU
member states after July 1, 2006.
Disclaimer
Every effort has been made to make this material complete, accurate, and up-to-date.
In addition, changes are periodically added to the information herein; these changes
will be incorporated into new editions of the publication.
Zebra reserves the right to make improvements and/or changes in the product(s)
and/or the program(s) described in this document without notice, and shall not be
responsible for any damages, including but not limited to consequential dam- ages,
caused by reliance on the material presented, including but not limited to
typographical errors.
Loading...