Insert stylus tube here
Insert stylus
STANDARD BLANK END-CAP (WA6214) WITH STYLUS HOLDER
INSTALLATION SHEET
Warning: Installation of any components must be performed using appropriate anti-static devices. If unavailable, dis-
charge body static by touching a grounded metallic object before opening any covers on the hand-held.
Along with the blank end-cap, this kit includes:
• M2.6x8L Torx T6 screws (x4)
•stylus
Important: Always disconnect the unit from all power sources (battery & A/C power) before servicing components.
1. Remove battery, back cover (x6 screws), and end-cap (x4 screws).
2. Slide the stylus tube into the opening along the left side of the unit.
3. Attach the end-cap using the four screws provided. Torque to 2.6 in-lbs.
4. Slide the stylus into the slot.
5. Install the back cover.
6. Install the battery and battery cover.
COMPANY HEADQUARTERS SUPPORT SERVICES
Zebra Technologies Corporation Contact the Zebra Global Customer Support at:
Lincolnshire, IL U.S.A. http://www.zebra.com/support.
http://www.zebra.com
© 2015 Symbol Technologies, Inc.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered trademark of Symbol Technologies,
Inc., a Zebra Technologies company.
February 27, 2015
8000307-001 A
Loading...