Zebra Workabout Pro 4 Available Space in Workabout Pro4 Expansion Module & Multi-purpose Endcap English

AVAILABLE SPACE IN

WORKABOUT PRO4 EXPANSION

MODULE & MULTI-PURPOSE ENDCAP

Available Space in WorkaboutPro4 Expansion Module & Multi-p urpose Endcap

Viewing the Graphics in this Document

The graphics are all 3D enabled. You need to view this document with one of the following:

• The latest version of Adobe Reader . This allows you to rotate , resize, see the list of part s in,
the graphics.

• A recent version of Adobe Acrobat. This allows you to do all the actions that you can do in
Reader, as well as allowing you to t ake measurements from the graphic.

For detailed instructions on using the 3D features, see the online help in Adobe Reader or in
Adobe Acrobat.

Expansion Module

An expansion module is mounted inside th e Workabout Pro4 on the metal mou nting fr am e. It is
attached to the frame by four screws.

WARNING! The 100-pin connector is the only item that can be mounted on the underside

of the expansion board.

It is important that no part of the expansion module interferes either mechanically or electrically
with the component parts of the Workabout Pro4.

Not only must the expansion module fit into the available space inside the Workabout Pro4, but
the module must be capable of being moved into position either by inserting it through the back
of the Workabout Pro4 or through the endcap opening.

Workabout Pro4 HDK Expansion Module & Multi-purpose Endcap Available Space - 26 August 2014

1

Available Space in Workabout Pro4 Expansion Module & Multi-purpose Endcap
Creating a Module for Insertion Through the Back of the Workabout Pro4

Creating a Module for Insertion Through the Back of the Workabout Pro4

The maximum volume that can be occupied by the expansion board and all its components,
while being capable of fitting through the back of the Workabout Pro4, is illustrated in the
following diagrams:

Figure 1-1

3D Expansion Module Region

Figure 1-2

Workabout Pro4 HDK Expansion Module & Multi-purpose Endcap Available Space - 26 August 2014

2

Top View of the Expansion Module Region (measurements in mm)