PX3008
NEO Cradle Modem
User Manual
PN 8000194.A
ISO 9001 Certied
Quality Management System
Return-To-Factory Warranty
Psion Teklogix provides a return to factory warranty on this product
for a period of twelve (12) months in accordance with the statement
of Warranty and Product Support provided at:
www.psionteklogix.com/warranty
The warranty on Psion Teklogix manufactured equipment does not extend to
any product that has been tampered with, altered, or repaired by any person
other than an employee of an authorized Psion Teklogix service organization.
See Psion Teklogix terms and conditions of sale for full details.
Important: Psion Teklogix warranties take effect on the date of
shipment.
Service
Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs.
To locate your local support services, please go to:
www.psionteklogix.com/service-and-support.htm
© Copyright 2010 by Psion Teklogix Inc., Mississauga, Ontario, Canada
This document and the information it contains is the property of Psion Teklogix
Inc., is issued in strict condence, and is not to be reproduced or copied, in whole
or in part, except for the sole purpose of promoting the sale of Psion Teklogix
manufactured goods and services. Furthermore, this document is not to be used
as a basis for design, manufacture, or sub-contract, or in any manner detrimental
to the interests of Psion Teklogix Inc.
NEO™ is a trademark of Psion Teklogix Inc.
All trademarks are the property of their respective holders.
List of Approvals
North America
FCC Part 68 and IC CS-03 Industry Canada Telecom Requirements.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to
the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
Telecom Compliance, Warnings, and Notices
United States
The applicable regulatory notices for the United States include:
• This equipment complies with Part 68 of the FCC rules and requirements
adopted by ACTA. On the bottom of this equipment is a label that contains
a product identier in the format US:AAAEQ##TXXXX. If requested,
this number must be provided to the telephone company.
The Ringer Equivalency Number (REN) determines the number of devices
that may be connected to a telephone line. Excessive RENs on a telephone
line may result in devices not ringing in response to an incoming call.
In most areas, the sum of RENs should not exceed ve (5.0). The REN
for this product is part of the product identier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without
a decimal point.
• This equipment must be connected to the telephone network or premises
wiring using a compatible modular jack (RJ11C) compliant with the
applicable FCC Part 68 rules and requirements adopted by ACTA. A
compliant telephone cord and modular plug are provided with this product.
It is designed to be connected to a compatible modular jack that is also
compliant.
• If this equipment, the NEO Cradle Modem, PX3008, causes harm to the
telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. Also, you will be
advised of your right to le complaint with the FCC if you believe it is
necessary.
• The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of this equipment.
If this happens, the telephone company will provide advance notice in
order for you to make necessary modications to maintain uninterrupted
service.
• If trouble is experienced with this equipment, the NEO Cradle Modem,
PX3008, contact Psion Tekogix (800-387-8898, option 3) for repair or
warranty information. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
• This equipment must not be used on party lines.
• If your home or business has specially wired alarm equipment connected
to the telephone line, ensure the installation of this modem does not
disable your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company.
• No user repairable parts are contained within this equipment.
Canada
This equipment meets the applicable Industry Canada Terminal Equipment
Technical Specications. This is conrmed by the registration number on the
product label. The abbreviation “IC” before the registration number signies
that registration was performed based on a Declaration of Conformity indicating
that Industry Canada technical specications were met. It does not imply that
Industry Canada approved the equipment.
Europe
This equipment complies with the essential requirements of EMC Directive
2004/108/EC, R&TTE Directive 1995/5/EC, and Low Voltage Directive 2006/95/EC.
When used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals
fulll all requirements for CE marking.
Declaration of Conformity Documents are available on request.
Waste Electrical and Electronic
Equipment (WEEE) Directive 2002/96/EC
This Product, and its accessories, comply with the requirements of
the Waste Electrical and Electronic Equipment (WEEE) Directive
2002/96/EC.
If your end-of-life Psion Teklogix product or accessory carries a label as shown
here, please contact your local country representative for details on how to arrange recycling. For a list of international subsidiaries, please go to:
www.psionteklogix.com/environmental-compliance.htm
Restriction On Hazardous Substances (RoHS)
Directive 2002/95/EC
What is RoHS?
The European Union has mandated that high environmental standards be met in
the design and manufacture of electronic and electrical products sold in Europe,
to reduce hazardous substances from entering the environment. The “Restriction
on Hazardous Substances Directive (RoHS)” prescribes the maximum trace levels of lead, cadmium, mercury, hexavalent chromium, and ame retardants PBB
and PBDE that may be contained in a product. Only products meeting these high
environmental standards may be “placed on the market” in EU member states
after July 1, 2006.
RoHS Logo
Although there is no legal requirement to mark RoHS-compliant
products, Psion Teklogix Inc. indicates its compliance with the
directive as follows:
The RoHS logo located either on the back of the product or underneath the battery in the battery compartment (or on a related accessory such as the charger
or docking station) signies that the product is RoHS-compliant as per the EU
directive. Other than as noted below, a Psion Teklogix product that does not have
an accompanying RoHS logo signies that it was placed on the EU market prior
to July 1, 2006, and is thereby exempt from the directive.
Note: Not all accessories or peripherals will have a RoHS logo due to physical
space limitations or as a result of their exempt status.
Disclaimer
Every effort has been made to make this material complete, accurate, and up-todate. In addition, changes are periodically added to the information herein; these
changes will be incorporated into new editions of the publication.
Psion Teklogix Inc. reserves the right to make improvements and/or changes in
the product(s) and/or the program(s) described in this document without notice,
and shall not be responsible for any damages, including but not limited to consequential damages, caused by reliance on the material presented, including but
not limited to typographical errors.
Loading...