Zebra MP7000 Scanner Scale MP7000 Scanner Scale Regulatory Guide (en)

MP7000

SCANNER SCALE

Regulatory Guide

Warranty

For the complete Zebra hardware product warranty
statement, go to: www.zebra.com/warranty.

For Australia Only

This warranty is given by Zebra Technologies Asia Pacific
Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore
068895, Singapore. Our goods come with guarantees that
cannot be excluded under the Australia Consumer Law.
You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a
major failure. Zebra Technologies Corporation Australia’s
limited warranty above is in addition to any rights and
remedies you may have under the Australian Consumer
Law. If you have any queries, please call Zebra
Technologies Corporation at [phone]. You may also
visit our website: www.zebra.com
warranty terms.

for the most updated

Regulatory Information

This device is approved under Zebra Technologies
Corporation.
This guide applies to Model Number MP7000 Series and
its optional accessories.
All Zebra devices are designed to be compliant with the
rules and regulations in the locations they are sold and will
be labeled as required.
Local language translations are available at the following
website: www.zebra.com/support
Any changes or modifications to Zebra equipment not
expressly approved by Zebra could void the user's
authority to operate the equipment.

.

Health and Safety Recommendations

Ergonomic Recommendations

CAUTION In order to avoid or minimize the potential risk of

ergonomic injury, follow the recommendations below.
Consult with your local Health and Safety Manager to
ensure that you are adhering to your company's safety
programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

LED Devices

Classified as 'EXEMPT RISK GROUP' according to IEC
62471:2006 and EN 62471:2008.

Weights & Measures Scale Certifications

Zebra scanner/scales are certified in the United States,
Canada, Europe (EU) and other countries where
applicable.

Scale devices can be Gravity Compensated for EU country
specific gravity zones or according to the Zones listed
below:

Zone

Number

Zone 1 35 - 37 0 - 500
Zone 2 37 - 39 0 - 400
Zone 3 39 - 41 0 - 400
Zone 4 39 - 41 400 - 800
Zone 5 39 - 41 800 - 1200
Zone 6 41 - 43 0 - 400
Zone 7 41 - 43 400 - 800
Zone 8 41 - 43 800 - 1200
Zone 9 43 - 45 0 - 400
Zone 10 45 - 47 0 - 400
Zone 11 45 - 47 400 - 800
Zone 12 47 - 49 0 - 400
Zone 13 47 - 49 400 - 800
Zone 14 49 - 51 0 - 400
Zone 15 51 - 53 0 - 400
Zone 16 53 - 55 0 - 500
Zone 17 55 - 57 0 - 500
Zone 18 57 - 59 0 - 500
Zone 19 59 - 61 0 -500
Zone 20 61 - 63 0 - 500
Zone 21 63 - 65 0 -400

Zone

Latitude

Elevation in

Meters

Non-automatic Weighing Instruments Models
MP70X1 & MP70X2

The first step of the verification has been carried out at the
manufacturing plant. It comprises all tests according to EN
45501-8.3.3.
Scanner/Scales defined for Gravity Zones are sealed and
marked with Latitude and Elevation range can only be used
in predefined zone and are ready for immediate use.
Scanner/Scales not defined for Gravity Zones (unmarked
Latitude and Elevation range) and unsealed are NOT
LEGAL FOR TRADE UNTIL VERIFICATION
PERFORMED BY ZEBRA TECHNOLOGIES
AUTHORIZED SERVICE CENTER. Please contact a
Zebra Technologies authorized service center for
assistance.
Connection of the NAWI to a Point of Sale (POS/PC)
system requires POS manufactures or owners of the
equipment to ensure Declaration of Conformity for
complete system.
The full text of the EU Declaration of Conformity is
available at the following Internet address:

www.zebra.com/doc

.

Power Supply

Use ONLY a Zebra approved UL LISTED ITE (IEC/EN
60950-1, LPS) power supply with electrical ratings: Output
12 Vdc, min 3.33 A, with a maximum ambient temperature
of at least 40 degrees C. Use of alternative power supply
will invalidate any approvals given to this unit and may be
dangerous.

Zebra reserves the right to make changes to any product to
improve reliability, function, or design. Zebra does not
assume any product liability arising out of, or in connection
with, the application or use of any product, circuit, or
application described herein. No license is granted, either
expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any

combination, system, apparatus, machine, material,
method, or process in which the products might be used.
An implied license exists only for equipment, circuits, and
subsystems contained in Zebra products.

Zebra Technologies Corporation
Lincolnshire, IL, U.S.A.
© 2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and

the stylized Zebra head are trademarks of ZIH Corp, registered in
many jurisdictions worldwide. All other trademarks are the property of
their respective owners.

MN-002939-01 Rev. A — May 2017

Radio Frequency Interference Require-

•

10

3DUWV

3E

+J

&G

3%%

3%'(

0HWDO3DUWV

&LUFXLW0RGXOHV

&DEOHVDQG&DEOH$VVHPEOLHV

3ODVWLFDQG3RO\PHULF3DUWV

2SWLFVDQG2SWLFDO&RPSRQHQWV

%DWWHULHV

2

;

2

2

2

2

7KLVWDEOHZDVFUHDWHGWRFRPSO\ZLWK&KLQD5R+6UHTXLUHPHQWV

2

2

2

2

2

2

2

2

2

2

22 2 2 2

2

22 2 2 2

22 2 2 2

2

2

2

㦘⹂䓸德

&U9,

㦻嫷㫋∬㗽6-7䤓屓⸩冥Ⓟᇭ

2嫷䯉年㦘⹂䓸德⦷年捷ↅ㓏㦘⧖德㧟㠨₼䤓⚺摞⧖⦷*%7屓⸩䤓棟摞

尐㻑ⅴₚᇭ

;嫷䯉年㦘⹂䓸德咂⺠⦷年捷ↅ䤓㩟₏⧖德㧟㠨₼䤓⚺摞怔⒉*%7屓⸩䤓

棟摞尐㻑ᇭ←₩♾⦷㷳⮓᧨㫈㗽⸭棔㍔⑄⺈ₙ嫷₼㓢ಯರ䤓㔏㦾☮⥯扪嫛扪₏㷴
広㢝ᇭ᧥

;

ments- FCC

Note: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits

are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Radio Frequency Interference
Requirements- Canada

CAN ICES-3 (B)/NMB-3(B)

Marking and European Economic Area
(EEA)

Statement of Compliance

Zebra hereby declares that this device is in compliance
with all applicable Directives, 2014/30/EU, 2014/35/EU and
2011/65/EU.

The full text of the EU Declaration of Conformity is
available at the following Internet address:

www.zebra.com/doc

.

Statement of Compliance

Zebra hereby declares that this device is in compliance
with all the applicable Directives, 2014/31/EU and 2011/65/
EU.
The full text of the EU Declaration of Conformity is
available at the following Internet address:

www.zebra.com/doc

.

Japan (VCCI) - Voluntary Control Council for
Interference

Class B ITE

Korea Warning Statement for Class B ITE

Chile

Este equipo cumple con la Resolución No 403 de 2008, de
la Subsecretaria de telecomunicaciones, relativa a
radiaciones electromagnéticas.

China

通过访问以下网址可下载当地语言支持的产品说明书

www.zebra.com/support

Eurasian Customs Union

Евразийский Таможенный Союз
Данный продукт соответствует требованиям знака EAC.

Ukraine

Дане обладнання відповідає вимогам технічного
регламенту №1057, № 2008 на обмеження щодо
використання деяких небезпечних речовин в
елек тричних та електронних пристроях.

Waste Electrical and Electronic
Equipment (WEEE)

English: For EU Customers: All products at the end of their life

must be returned to Zebra for recycling. For information on how to
return product, please go to: www.zebra.com/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin
de cycle de vie doivent être retournés à Zebra pour recyclage.
Pour de plus amples informations sur le retour de produits,
consultez : www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos
deberán entregarse a Zebra al final de su ciclo de vida para que
sean reciclados. Si desea más información sobre cómo devolver
un producto, visite: www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am
Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt
werden. Informationen zur Rücksendung von Produkten finden Sie
unter www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al
termine del rispettivo ciclo di vita devono essere restituiti a Zebra
al fine di consentirne il riciclaggio. Per informazioni sulle modalità
di restituzione, visitare il seguente sito Web: www.zebra.com/
weee.

Português: Para clientes da UE: todos os produtos no fim de vida
devem ser devolvidos à Zebra para reciclagem. Para obter
informações sobre como devolver o produto, visite:
www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het
einde van hun levensduur naar Zebra te worden teruggezonden
voor recycling. Raadpleeg www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z
eksploatacji nale¿y zwróciæ do firmy Zebra w celu ich utylizacji.
Informacje na temat zwrotu produktów znajduj¹ siê na stronie
internetowej www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po
skonèení jejich životnosti vrátit spoleènosti Zebra k recyklaci.
Informace o zpùsobu vrácení produktu najdete na webové
stránce: www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni
saamiseks toote tagastamise kohta külastage palun aadressi:
www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a
Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson
el a www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Zebra za reciklažo. Za informacije o
vraèilu izdelka obišèite:
www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin
livslängd måste returneras till Zebra för återvinning. Information
om hur du returnerar produkten finns på www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää
käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til
recirkulering, når de er udtjent. Læs oplysningerne om returnering
af produkter på: www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο

τέλος της
διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra για
ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση
www.zebra.com/weee στο ∆ιαδίκτυο.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar
tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għar­riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott,
jekk jogħġbok żur: www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia
byť po uplynutí doby ich životnosti vrátené spoločnosti Zebra na
recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:
www.zebra.com/weee.

Lietuvių:

ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Zebra“.
Daugiau informacijos, kaip grąžinti gaminį, rasite:
www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža
beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu
informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet:
www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri
dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade
edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
www.zebra.com/weee.
Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku
vijeka trajanja moraju vratiti tvrtki Zebra na recikliranje. Informacije
o načinu vraćanja proizvoda potražite na web-stranici: http://
www.zebra.com/weee.

Turkish WEEE Statement of Compliance

EEE Yönetmeliğine Uygundur

CMM Disclosure

This table was created to comply with China RoHS
requirements.